normanh Posted April 28, 2013 Share #1 Posted April 28, 2013 I have a quantity of cherry in strips 0.5 mm thick that can be cut down to a 4mm planking width, has anyone used this for decking or even wales? Its a bit thin for a final planking but is easy enough to build up for a wale. Norman Quote Norman Current build Trumpeter Arizona 1:200 with White Ensign PE and a Nautilus Wooden Deck. Built Caldercraft Convulsion, HM Brig Badger and HMS Snake. Awaiting - Zvelda HMS Dreadnought planning to get the Pontos Deck and PE Upgrades, Panart 1:23 Gun deck model and couple of the cannon kits Manatu - French siege mortar, and American coastal cannon. Link to comment Share on other sites More sharing options...
catopower Posted April 29, 2013 Share #2 Posted April 29, 2013 Hi Norman, I've used quite a bit of cherry in ship modeling. I did the hull of my privateer Lively using cherry as well as the deck furniture and spars. However, I wouldn't recommend it for decking. It will darken with exposure to light and after a while, so it won't look the way it looks when you are planking. The final color comes out a reddish brown. It's a pretty color, but probably not ideal for a deck. For wales or whatever, it's fine, but I would just get a piece the right thickness rather than fool around with trying to build it up using the 0.5mm stuff just because you have it. Clare Quote Clare Hess He's a -> "HE" Link to comment Share on other sites More sharing options...
tkay11 Posted April 29, 2013 Share #3 Posted April 29, 2013 As a matter of interest, Norman, where were you able to buy 0.5mm cherry from? Was it in the UK? I'd be glad to know because I need 0.5mm cherry to finish off my ship's boat. I've been using 1/16 and 3/32 cherry board which I found at Cornwall Model Boats, but haven't yet found a supplier of smaller strips. As a result I had to do the ribs using walnut and the combination looks a bit odd. Tony Tony Quote === First build: Caldercraft HM Cutter Sherbourne 1763 FINISHED 2nd build: Triton cross-section COMPLETED 3rd build: La Chaloupe Armée / 42ft Armed Longboat of 1834 by tkay11 – scale 1:36, plans by M. Delacroix COMPLETED 4th build: Allège d’Arles 1833 (Ancre) POB by tkay11 – scale 1:100, plans by F. Fissore COMPLETED Working on La Jacinthe 1:96 POB (ANCRE publications) Link to comment Share on other sites More sharing options...
LFrankCPA Posted April 29, 2013 Share #4 Posted April 29, 2013 Try this link for Cherry strips....good price. http://www.leevalley.com/en/wood/page.aspx?c=&p=40840&cat=1,250,43217 Hope it works, never tried this before....... brianbrownzzzzzz 1 Quote Link to comment Share on other sites More sharing options...
tkay11 Posted April 29, 2013 Share #5 Posted April 29, 2013 Thanks, LFrank, I had a look, but it's based in the USA and also the strips there are no longer sold by them or out of stock. I'm really looking for a UK supplier to avoid heavy shipping costs. Tony Quote === First build: Caldercraft HM Cutter Sherbourne 1763 FINISHED 2nd build: Triton cross-section COMPLETED 3rd build: La Chaloupe Armée / 42ft Armed Longboat of 1834 by tkay11 – scale 1:36, plans by M. Delacroix COMPLETED 4th build: Allège d’Arles 1833 (Ancre) POB by tkay11 – scale 1:100, plans by F. Fissore COMPLETED Working on La Jacinthe 1:96 POB (ANCRE publications) Link to comment Share on other sites More sharing options...
Garward Posted April 29, 2013 Share #6 Posted April 29, 2013 Cherry wood well is suitable for a decor and finishing of details, for a deck flooring it too dark. Quote Best regards, Garward Is under construction Montanes Ready models Golden Star Corsair San Francisco II Bronze 24-pdr canone Le Fleuron Bronze 24-pdr canone Le Fleuron (second version) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.