rummy Posted February 18, 2013 Share #1 Posted February 18, 2013 Frames mounted . One thing I learned is not to build with oak unless you realy like to sand..Ready to procede. Larry With Age Comes Wisdom,I'm Still Waiting! Current Builds:Syren.Triton Cross section. Completed Builds: Virginia by AL King of the Mississippi by AL Constellation by AL Link to comment Share on other sites More sharing options...
Pete38 Posted February 18, 2013 Share #2 Posted February 18, 2013 Rummy, Nice to see you start back. Looking forward to more!!! The Oak is kinda hard Triton Cross Section 1:32 SEE YA LATER Link to comment Share on other sites More sharing options...
rummy Posted February 18, 2013 Author Share #3 Posted February 18, 2013 A few more pictures. Fairing war tough with the oak.Now I'll will work in a softer wood. Thanks Pete Best Regards Larry With Age Comes Wisdom,I'm Still Waiting! Current Builds:Syren.Triton Cross section. Completed Builds: Virginia by AL King of the Mississippi by AL Constellation by AL Link to comment Share on other sites More sharing options...
Pete38 Posted February 19, 2013 Share #4 Posted February 19, 2013 That looks like a nice fit of the keel to the frames. How did you cut the slot in the frames for the keel? Triton Cross Section 1:32 SEE YA LATER Link to comment Share on other sites More sharing options...
augie Posted February 19, 2013 Share #5 Posted February 19, 2013 Looking good, Larry. Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
mtaylor Posted February 19, 2013 Share #6 Posted February 19, 2013 NIce work, Larry. Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Rustyj Posted February 19, 2013 Share #7 Posted February 19, 2013 Hi Larry. I agree she'looking really good. That walnut should look nice when finished. Rusty "So Long For Now" Current Builds: HMS Winchelsea 1/48 Duchess of Kingston Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
bbrockel Posted February 19, 2013 Share #8 Posted February 19, 2013 Nice going, Larry. You are off to a smashing start. "I've told you a million times, don't exaggerate " Current builds: H.M.S. TRITON Cross Section by Bbrockel - Scratch Build - Scale 1:48 US Brig Syren by Bbrockel - Model Shipways -Scale 1:64 Link to comment Share on other sites More sharing options...
Long9Ron Posted February 20, 2013 Share #9 Posted February 20, 2013 Looking great Larry. I will follow your build log. Ron Current Build: H.M.S. Triton Cross Section 1:48 Why is it that I always find out the best way to do something is after I have already done it the wrong way? - Me Link to comment Share on other sites More sharing options...
rummy Posted February 21, 2013 Author Share #10 Posted February 21, 2013 Thank You one and all.I started the inboard planking .This goes really fast.I'll start the beams today. Pete I cut the two lines then used a chisel. Then I used a file to fit and smooth. Back to work, Larry With Age Comes Wisdom,I'm Still Waiting! Current Builds:Syren.Triton Cross section. Completed Builds: Virginia by AL King of the Mississippi by AL Constellation by AL Link to comment Share on other sites More sharing options...
augie Posted February 21, 2013 Share #11 Posted February 21, 2013 Looking very shipshape Larry! Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
rummy Posted February 23, 2013 Author Share #12 Posted February 23, 2013 Thank You Augie.Just about time to go flying? Pride comes before the fall.I was rolling along,proud of my work.I tought let me stain the lower part now. I applied two coats of pre-stain,one coat of natural.Should have been sealed.Then one coat of 50/50% natural and gloden oak.Turned out awful.It just kept getting worse.I finally had to punt and go down stairs to cut some wood and place a verner to cover it but of a little harder wood. I did learn something,I never tought I could cut wood this thin on a bandsaw .050 inch/1.27 mm On with the learning and fixing mistakes I learn from Best Regards Larry With Age Comes Wisdom,I'm Still Waiting! Current Builds:Syren.Triton Cross section. Completed Builds: Virginia by AL King of the Mississippi by AL Constellation by AL Link to comment Share on other sites More sharing options...
augie Posted February 23, 2013 Share #13 Posted February 23, 2013 Sorry Larry --- winter just really got here. I did just complete the winter maintenance schedule though ---- so I'm ready. Almost hate to see Spring come.....cuts down on building time!!!!! Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
Pete38 Posted February 23, 2013 Share #14 Posted February 23, 2013 Larry Sorry about the way your stain turned out on the lower part. But a real nice save using the thin hardwood.... What type you using. Keep up the great work. Triton Cross Section 1:32 SEE YA LATER Link to comment Share on other sites More sharing options...
mtaylor Posted February 23, 2013 Share #15 Posted February 23, 2013 Hmm... the first layer does look, shall we say, well-weathered. Nice save, Larry. Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
rummy Posted February 25, 2013 Author Share #16 Posted February 25, 2013 I may have saved the build, Mark,I do know how to create that look(Every Thing Burned but This Part look) Augie,Snow skis for your planes thats the anwser. Pete,Not sure what kind of wood.It could be cherry.When I go camping I buy bundles of fire wood.It must come from some kind of wood working place.They are all boards oak, walnut,cherry and others.I grab the good ones the rest up in smoke. Back to more mistakes so I can learn more. Larry mtaylor 1 With Age Comes Wisdom,I'm Still Waiting! Current Builds:Syren.Triton Cross section. Completed Builds: Virginia by AL King of the Mississippi by AL Constellation by AL Link to comment Share on other sites More sharing options...
Pete38 Posted February 25, 2013 Share #17 Posted February 25, 2013 Now that looks nice. If you hadn't shown the before pictures it would be hard to tell there were to layers. Great job. It's only a mistake if you leave it. If you fix it, it was trying something different. Triton Cross Section 1:32 SEE YA LATER Link to comment Share on other sites More sharing options...
Matrim Posted February 25, 2013 Share #18 Posted February 25, 2013 Or you could go for a 'feature' - to show how they did not do things. Better to just do and redo though as most people get a peverse sense of satisfaction from thinking 'that tiny plank took eight tries and hours to get right and no-one will know' GreyMan 1 ... Link to comment Share on other sites More sharing options...
Long9Ron Posted February 26, 2013 Share #19 Posted February 26, 2013 Nice job Rummy. It's looking good. Ron Current Build: H.M.S. Triton Cross Section 1:48 Why is it that I always find out the best way to do something is after I have already done it the wrong way? - Me Link to comment Share on other sites More sharing options...
rummy Posted March 1, 2013 Author Share #20 Posted March 1, 2013 Thanks every one. A little more progress.That dang beam arm is quite the hard thing to make.I think it took me a hole day to make and re-make.It came out ok.I did cut out the pattern and tape it on. Tomorrow I will work on the carling,hanging knee,and lodging knee.Just listen to me talk. Before yesterday I did not know what these things were. Larry 42rocker 1 With Age Comes Wisdom,I'm Still Waiting! Current Builds:Syren.Triton Cross section. Completed Builds: Virginia by AL King of the Mississippi by AL Constellation by AL Link to comment Share on other sites More sharing options...
42rocker Posted March 1, 2013 Share #21 Posted March 1, 2013 Looks nice, hope to get to that stage in a few months. Later 42rocker Current Build -- Finishing a 1:1 House that I've been building for a while Current Build -- Triton Cross Section Link to comment Share on other sites More sharing options...
mtaylor Posted March 1, 2013 Share #22 Posted March 1, 2013 Looking super Larry. Those beams are a bear and your's came out perfectly. Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
AnobiumPunctatum Posted March 1, 2013 Share #23 Posted March 1, 2013 looking really nice. Well done Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali Link to comment Share on other sites More sharing options...
Matrim Posted March 1, 2013 Share #24 Posted March 1, 2013 Before you glue those in it would be useful to sand and possibly oil the inner planking. It will get more difficult to do once the beams are in place plus adding extra risk of knocking stuff out. Your choice though.. Joss. ... Link to comment Share on other sites More sharing options...
Pete38 Posted March 1, 2013 Share #25 Posted March 1, 2013 Moving right along. Very nice work... that hard oak must have been tough to work with. Triton Cross Section 1:32 SEE YA LATER Link to comment Share on other sites More sharing options...
rummy Posted March 2, 2013 Author Share #26 Posted March 2, 2013 Thank you Rocker and Christian. Mark I would never say perfect, makeup will hide a lot.Joss I took your advice an stained inside.Pete I dont know if it was just the oak I got or what but it was a bear to fair.So just the frames are out of oak.A few pictures of the staining.I think the wood is cherry and I used pre-stain followed by natural. Thanks for looking Larry With Age Comes Wisdom,I'm Still Waiting! Current Builds:Syren.Triton Cross section. Completed Builds: Virginia by AL King of the Mississippi by AL Constellation by AL Link to comment Share on other sites More sharing options...
Pete38 Posted March 2, 2013 Share #27 Posted March 2, 2013 Very nice, the natural on the cherry is just right, (higlights the wood without hiding it) Triton Cross Section 1:32 SEE YA LATER Link to comment Share on other sites More sharing options...
Boccherini Posted March 4, 2013 Share #28 Posted March 4, 2013 Larry, the colour of the timber has come up beautifully. The beam arms are a real bugger to get right, yours look fine. Joss is right about getting the sealing done before building over, it might be good idea though, to not seal where the knees will be placed, your glue may not bond to the sealed surface properly leading to joint failure when you can no longer easily access the area for repairs. Hate to tell you this, from the pictures, it appears your knees are incorrectly sited, they should be alongside the deck beams, not underneath them. Check the drawings. Regards, Grant. Link to comment Share on other sites More sharing options...
mtaylor Posted March 4, 2013 Share #29 Posted March 4, 2013 Larry, looks super. I like that color of the finish. However, Grant is right about the knee placement. Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
rummy Posted March 4, 2013 Author Share #30 Posted March 4, 2013 Thank you Mark and Grant,I will fix or cover my mistakes My favorite sayings: Plans I dont need no stinking plans and no I don't need a map Larry With Age Comes Wisdom,I'm Still Waiting! Current Builds:Syren.Triton Cross section. Completed Builds: Virginia by AL King of the Mississippi by AL Constellation by AL Link to comment Share on other sites More sharing options...
Recommended Posts