Jump to content

Arethusa by Elia - 1907 Knockabout Banks Fishing Schooner


Recommended Posts

The build log reconstruction begins...

 

It has been a long time since I’ve started a new sailing ship build, with my sailing ship model (Oneida) taking about 4 years to complete.  Ever since building Smuggler, an 1870’s mackerel seiner from Gloucester, I’ve been smitten by 19th and 20th century American fishing schooners.  There are a number builds, both in progress and completed, that have been inspiring to me – Bluenose builds, a couple of Ben Lathams, a scratch build of Columbia, and even a few of the “yachty” Americas.  Jim Lefever, who’s impressive Benjamin Latham build was a great inspiration for me, provided me with a list of great reading references on American fishing schooners.  After receiving a number of them as gifts, and reading through them, I knew my next build would have to be another fishing schooner.  I have to admit right up front that Arethusa, an early 1900s fishing schooner and the topic of this build, was never called the “Goddess of Gloucester”.  She was a goddess in Greek mythology.  The schooner was named after one of Thomas McManus's daughters.  I just thought that 'Goddess of Gloucester' fit to her will and made for a catchy name for this log.  Arethusa, the schooner, was big, beautiful, and had a colorful history – sounds interesting to me.  Enough about my motivations and ramblings….let’s get on with the ship.  
 
Arethusa was designed by Thomas F. McManus in 1907 and built by James and Tarr in Essex, Massachusetts, in 1909.  She was what is termed a knockabout schooner.  Unlike traditional schooners, with bowsprits (and jibbooms, and flying jibbooms), knockabout schooners had an extended bow and no bowsprit.  The extended bow essentially placed the fore topmast stay at the same position as on a traditional schooner.  With that configuration of stay location the crew wouldn’t be required to climb out on the typically poorly maintained footropes aside the bowsprit in order to perform tasks involving the sails and rigging.  This was a Thomas McManus innovation, based on his observations and discussions with fisherman and owners, and was meant to reduce sailing crew injuries and deaths.
 
I am using Howard I. Chapelle’s lines drawing and sail plan of Arethusa from his “American Fishing Schooners”, plate 120 and figure 30.  “American Fishing Schooners” (AFS) has a great deal of detail in it’s appendix on most of the features of late 19th century and early 20th century schooners, and it is these I will use to build the details of the model.  If anyone knows of more details about Arethusa I would be most grateful to learn of them.  I have contacted Mystic Seaport Museum about their collection but found that while Arethusa is listed in their collection they don’t have any more information than that (little) which is shown in AFS.
 
Following are some excerpts from “Thomas F. McManus and the American Fishing Schooners”, by W.M.P. Dunne, on Arethusa:
James and Tarr “...completed her on 25 September 1907.  Fifteen feet longer than the Pontiac, the Arethusa was, nevertheless, a deep, short ended knockabout, with the typically knuckled straight run of the keel (although with less drag), that Tom favored in this class, and more tumblehome.  Once again he experimented with the rig.  He stepped the foremast farther forward with the masts further apart.  Right from the start, the big fisherman earned a reputation as a speedster.  Captain Clayton Morrisey, the Arethusa’s first skipper waxed poetic: “She’s the slickest bit of wood that ever went down to Bay of Islands.  Nothing can touch her and an eight-year-old girl’s little finger is stout enough to spin the wheel no matter how fresh it breezes.”  “Can she sail?” exclaimed Captain Morrisey, opening his eyes as if he didn’t quite believe his ears.  “Why, when we were coming up from the herring grounds she cut out her 13 knots an hour for six consecutive hours.”
    “We’d see a blotch of smoke away ahead on the horizon and in a little while would make out a tramp steamer bound our way.  Pretty soon the Arethusa was kiting alongside the tramp and then we’d lose sight of her astern.  She did that trick a number of times.”
    In fact, with Clayt Morrissey at the helm in 1912, the Arethusa would easily outrun the Canadian Dominion fisheries’ patrol steamer Fiona, “whose commander opined the Arethusa was violating the three-mile limit.”
 
        “At the beginning of 1921, soon after the new [prohibition] law was in place, Captain William F. “Bill” McCoy, a sometime Daytona Beach, Florida, boatbuilder, guided his fully-laden McManus schooner, the Henry L. Marshall, past the Tybee Lighthouse and up the river to Savannah, where, in the dark of the night, he discharged not fish, but 1,500 cases of illicit liquor.  With the proceeds, McCoy replaced himself with a new skipper on board the Marshall and went to Gloucester in search of the boat of his dreams, Tom’s speedy Arethusa.  Although McCoy had fished the Marshall legitimately until after the Eighteenth Amendment dried out the country, he had always thirsted for Arethusa.  With Gloucester feeling the effect of postwar economic contraction, the owners of the fourteen-year-old schooner…..sold her to McCoy in April 1921.  The Arethusa became a rum runner, a fast freighter of bootleg spirits.  McCoy renamed her Tomoka, added a bowsprit so she could carry two jibs, jumbo and jib topsail-and a lot of liquor (she had the capacity of 6,000 cases of illegal alcohol).
    He brought the Tomoka to anchor just outside the then three mile limit of United States waters, but well within site of the beach.  He soon began a thriving business with New York and New Jersey bootleggers…. “  [this is where the term ‘the real McCoy’ came from]
 
Arethusa later returned to fishing, and was lost off Halifax in November 1929.  Her particulars are:
 
Designer                Thomas F. McManus
Builder                    Tarr and James
Launch date                25 September 1907
Gross tonnage                157 tons
Molded length at caprail of        127’ – 3”    
Molded beam                25’ – 0”
Molded depth                13’ – 2”
Registered dimensions        114.0’ x 25.6’ x 12.5’

post-624-0-61743500-1361186616_thumb.jpg

post-624-0-12011400-1361186623_thumb.jpg

post-624-0-07443100-1361186629_thumb.jpg

post-624-0-77878800-1361186637_thumb.jpg

post-624-0-20496500-1361186652_thumb.jpg

post-624-0-16008300-1361186660_thumb.jpg

post-624-0-72982600-1361186668_thumb.jpg

post-624-0-51713700-1361186678_thumb.jpg

post-624-0-74320600-1361186686_thumb.jpg

post-624-0-95611700-1361186702_thumb.jpg

post-624-0-90245900-1361186711_thumb.jpg

post-624-0-84731700-1361186719_thumb.jpg

post-624-0-41591500-1361186730_thumb.jpg

post-624-0-26320100-1361186741_thumb.jpg

Edited by Elia

Elia

 

Rose Valley, PA

 

Arethusa: 1907 Gloucester Knockabout

Link to comment
Share on other sites

Elia a graceful hull and fine execution of the planking. I will be following along.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Elia,

 

Missed this the first time around but oh what a lovely shape she has.

 

Bob

Edited by Cap'n'Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

Ron, Michael, Bob,

 

Thank you much for checking in on Arethusa.  When I get home from work today I'll continue the log rebuild process.  I have some true progress to add once the build log has been reconstructed.

 

In rebuilding the log I've decided to not show many of my questions and re-do's...and there were many...as the lost text and MSW post exchanges are lost and the images would require additional effort.  I am always happy and willing to recount some aspect of Arethusa's build if any questions arise.

 

Cheers,

Elia

 

Rose Valley, PA

 

Arethusa: 1907 Gloucester Knockabout

Link to comment
Share on other sites

Hello Elia:

 

I'm extremly delighted you backed up your photos, along with some of your data; and have re-presented your build log of Arethusa.

I have been an enthusiastic follower of your build since day one -from the shadows- for which I must apologize.

 

To explain:  I started a scratch build of Helen B. Thomas about three months prior to the beginning of your build log.  Hence my great

interest.  I'm nowhere near your skills, however, but you've encouraged me to make my build as good as my limited skills allow.  Presently,

I'm waiting on your presentation of the foredeck of Arethusa particularly the iron work at the top of the stem.  I know from Chapelle's notes

what the iron work is supposed to look, I simply cannot visualise it.  So, I'm waiting on you to demonstrate it.

 

Accordingly, you'll have me as a constant observer of your log.  And from now on I'll come in on occasion to cheer you on.

 

Kindest regards

 

Dick

Link to comment
Share on other sites

Dick,

 

Helen B. Thomas - neat!  I would love to see your progress to date.  Thanks much for checking in on Arethusa.  Once the hull is painted (soon, I promise!) I'll be working on fabricating the jumbo traveler, and then painting and assembling all of those windlass related parts.

 

Russ, Clay,

 

Big thanks!  I'll be continuing with the log re-build...

 

Cheers,

 

Elia

Elia

 

Rose Valley, PA

 

Arethusa: 1907 Gloucester Knockabout

Link to comment
Share on other sites

Elia - it's kind of fun to revisit your work on this ship.  I love the lines on Arethusa and your excellent clean work on her.  Looking forward to the rest of catching up!

 

Bob

Current build -- MS Bluenose

Future build - MS Flying Fish

 

"A ship is safe in harbor, but that's not what ships are for." - William G. T. Shedd

Link to comment
Share on other sites

Elia,

 

What great lines on that schooner, it's fantastic!  getting somewhat tired of always seeing Bluenose and Bluenose II.  I'm delighted someone is building a Knockabout Schooner.  I'll be eagerly following your progress.

 

Tim

Tim 

 

Current Build:

 

 

 

 

 

Future Build:

  • BlueJacket - USS Kidd (Fletcher Class Destroyer) Solid Hull
  • BlueJacket - U.S.S. SAMUEL B. ROBERTS, DE413 | Butler-Class Destroyer Escort
  • BlueJacket - 310' Destroyer "The famous "four-piper" of both World Wars"
  • Model Shipways - Pride of Baltimore II (Topsail Schooner) 
  • Model Shipways - Willie L. Bennett (Chesapeake Bay Skipjack)
  • Constructo - Pilar (Ernest Hemingway's Fishing Yacht)  
  • Sergal - Race Horse (Bomb Ketch)
  • Classic Warships - USS Salem CA-139 (Heavy Cruiser) Resin Kit
  • Pen Duick Schooner - Half Hull (Scratch Build)
  • CSA Submarine Hunley (Resin Kit)
  • Classic Warships - USS Washington BB-56 (Battleship) Resin Kit
  • Blue Ridge Models - USS Alaska CB-1 (Resin Kit)

 

Completed Builds:

                 

Member:

Hampton Roads Ship Model Society

 

              

Link to comment
Share on other sites

Hi Bob,

 

Thanks for stopping in on Arethusa!  Yes, I've found it somewhat fun to go back and dig through my saved items.  New stuff will be posted soon.

 

Tim,

 

Welcome aboard, and many thanks!  Yes, my knockabout is a bit different than the Bluenoses, but possessing many of the same features and attributes.

 

Cheers,

 

Elia

Elia

 

Rose Valley, PA

 

Arethusa: 1907 Gloucester Knockabout

Link to comment
Share on other sites

Elia:

Beautiful details, especially the windlass. Very good research as well.

 

Russ

Link to comment
Share on other sites

Elia,

 

Love the way you replaced the zinc parts with scraqtch built patrs.  Good job.

 

Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

Russ, Bob,

 

Thank you.  The cast windlass assembly is pretty nice.  It just takes some clean up with a file prior to finishing.  I first became acquainted with the Blue Jacket windlass on my Smuggler model and with some clean up and paint it looks pretty good.  Some of its details were a little thicker than scale, but my primary issue was that the parts weren't the right size for a schooner the size of Arethusa.  The windlass comparison photo is a good example of the size difference.  I'll admit that making the brass parts was fun, too.  :)  

 

Cheers,

 

Elia

Elia

 

Rose Valley, PA

 

Arethusa: 1907 Gloucester Knockabout

Link to comment
Share on other sites

Hi Elia, Very nice to see this again. Thanks.

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Elia,

 

I'm with everyone else.  Great to see you and Arethusa back.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Rusty, Robert, Druxey, Mark,

 

Many thanks for popping in here and for the kind words.

 

Dick (rhcronan),

 

While I've been puttering along with my rails I took a little side excursion and snapped some pictures of (a) Eric Ronnberg Jr.'s Arethusa model photo reproductions he had provided to me, and (b )some of the sketches I had made early one in my Arethusa build.  Here are forum sized images of them.  I think they should help illustrate the stem ironwork on a knockabout...at least Arethusa.  I did the sketches based on H.I. Chapelle's book appendix of American Fishing Schooners, and much of those sketches agree with Eric Ronnberg Jr.'s model quite well.  I've included the sketches for both the standing and rugging rigging at the stem (along with the jumbo stay on a post forward of the Samson post).  I hope these help you on your Helen B. Thomas model.  If you are so interested PM me and we can arrange for my sending you higher resolution images.

 

Cheers,

 

Elia

post-624-0-18252000-1361564630_thumb.jpg

post-624-0-67650600-1361564630_thumb.jpg

post-624-0-21033600-1361564631_thumb.jpg

post-624-0-71604100-1361564631_thumb.jpg

post-624-0-22751100-1361564632_thumb.jpg

post-624-0-73781500-1361564632_thumb.jpg

post-624-0-25836800-1361564633_thumb.jpg

Elia

 

Rose Valley, PA

 

Arethusa: 1907 Gloucester Knockabout

Link to comment
Share on other sites

Hello, Elia:

 

Many, many thanks for your time and assistance in posting the photos re. the stem metalwork.  I want you to know it is much appreciated

by this member.  I have a 1st Edition of The American Fishing Schooners by Chapelle, so no problem comparing your photos with the

notes Chapelle provides in the addendum to his book.

 

I'll continue to follow you with this very fine build.  Again, many thanks for your assistance.

 

kindest regards,

 

Dick

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...