Jump to content

Recommended Posts

We just got our first 3D printer in the office.

very simple little thing and very cheap circa $1600 (£1060)

Surely the future of manufacturing, we currently make(outsource) quite a few very complex parts in some exotic metals, parts that would be impossible to machine conventionally.

Im would like to resist but it's tempting to think that in the future, when I get a very poor quality casting for a part (figure head/ deck furniture) that I can model it and 3D print it.

It seems to defeat the point in some ways, however the finish results could be greatly improved.

This sort of cost also means it falls into the budget for the more serious home user.

I find this stuff really interesting, history in the making.

 

Nick

Link to comment
Share on other sites

Nick,

 

I think this will be a very interesting thing to keep an eye on.   I'm thinking of some of the fantastic computer 3d ship models I've seen on the site, and it seems like a natural for the next step to be printing them out.   You could print each plank and piece, and theoretically they would all fit together.   No more sawdust!

 

Surely, at the least all the metal castings and/or resin parts that come with kits could be made this way. 

 

And thinking of my current work on making deadeyes, how much easier it would be to simply print them out, in whatever size and quantity are needed!

 

Whether this is a good thing or not is another discussion!

 

Ron

Edited by rlb
Link to comment
Share on other sites

Now waiting for the cost of the materials to come down.  3D printing is still pretty pricey per square inch.

 

Current Builds:  Revell 1:96 Thermopylae Restoration

                           Revell 1:96 Constitution COMPLETED

                           Aeropiccola HMS Endeavor IN ORDINARY

Planned Builds: Scientific Sea Witch

                            Marine Models USF Essex

                            

 

Link to comment
Share on other sites

Being involved in model aircraft as well as wooden ship models, I've followed the progress in 3D printing with some interest.  There are already some individuals creating complete model aircraft (not just parts/fittings) using the technique.  Thusfar, these creations have been fabricated from composites.  But there is work being done on fabricating 'wood', of sorts.

 

I suspect progress will come faster then most of us expect.  The future is already here.

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

It's early days for these things although even now I can see how useful they can be for model making. Much of the stuff I've seen from them though has been rather underwhelming considering all the hype about 3D printing. If development continues apace and the price goes down while the durability of finished items goes up then I expect they will be indispensable for many of us in the near future. What excites me most about them is wondering what type of items can be made with these things that could'nt easily be manufactured before.

Link to comment
Share on other sites

I've known about and have worked with 3-D prints in my "day-job" and agree the technology is very promising, but it's still got a ways to go. The prints are still pretty rough and need significant hand-work before it can be used on a model. In fact, I think we have one of the very few hobbies where craftsmanship will NOT be replaced by 3-D printing. Our hulls are made of wood, and there is no printable substitute for some nice Pear planking, and I doubt a printer will ever be able to do rigging.

From about as far from the ocean as you can get in North America!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...