BLarock Posted January 23, 2014 Share #1 Posted January 23, 2014 I have been building Model Shipways brig Niagara for some years now, and p.5 of the plans [The Rigging Profile] shows near the upper right corner of the sheet a diagram of the jibboom outhaul tackle. I believe I understand the diagram, except. . . .at the bottom of the diagram the 0.016 in. line connects to. . . . what? Can anyone tell me where this line goes to, ties to, or ??? Thanks in advance if you can tell me where this line is connected. BLarock Quote Link to comment Share on other sites More sharing options...
mgdawson Posted January 25, 2014 Share #2 Posted January 25, 2014 Hi BLarock Perhaps if you could scan and post the relevant part of the diagram, someone who doesn't have that kit may be able to help. Mark Quote Mark D Link to comment Share on other sites More sharing options...
kenr Posted January 26, 2014 Share #3 Posted January 26, 2014 Hello BL I think they tie back to the belaying pin rack situated in the bow Let me know what you think If you haven't already it would be a good idea if you started a build log so we can all watch, help and encourage Regards Ken Quote Under construction US Brig Niagara Completed HMB Endeavour - Caldercraft Link to comment Share on other sites More sharing options...
Senior ole salt Posted January 26, 2014 Share #4 Posted January 26, 2014 Perhaps these images could help: S.os KevinR 1 Quote New Bedford Whaleboat build. Kit by Model Shipways I've been making progress on my model and according to the instruction booklet I should be painting it, at least parts of it. Are acrylic's ok ? I did apply a sanding sealer. but I want to stain the untreated floor boards which are walnut. Thanks S.O.S. Link to comment Share on other sites More sharing options...
Senior ole salt Posted January 26, 2014 Share #5 Posted January 26, 2014 KevinR 1 Quote New Bedford Whaleboat build. Kit by Model Shipways I've been making progress on my model and according to the instruction booklet I should be painting it, at least parts of it. Are acrylic's ok ? I did apply a sanding sealer. but I want to stain the untreated floor boards which are walnut. Thanks S.O.S. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.