sonicmcdude Posted January 22, 2014 Author Share #31 Posted January 22, 2014 I'm here Daniel. Thank You for your concern. I haven't post a progress for a long time now and is because of "changing life" and not having time for modeling. I'm hoping I will continue my build soon. This lack of modeling is killing me really :mellow:. Michel and harvey1847 2 Greetings, Sinan Build log:TRITON POB 1:72 Link to comment Share on other sites More sharing options...
AnobiumPunctatum Posted January 23, 2014 Share #32 Posted January 23, 2014 I really know what you mean. i had these problem the last few years. sonicmcdude 1 Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali Link to comment Share on other sites More sharing options...
Jasseji Posted June 20, 2018 Share #33 Posted June 20, 2018 Hello, After i made the Connie Cross-Section, i will be tacking this build in same scale Can you tell me what wood you used for the frames (thickness ?) Jacek Current Build: HMS Sphinx 1775 - Vanguard Models 1/64 On Hold/Parallel: Lady Nelson - Amati/Victory Models 1/64 Link to comment Share on other sites More sharing options...
mtaylor Posted June 20, 2018 Share #34 Posted June 20, 2018 Jacak, Have a look here: https://modelshipworld.com/index.php?/topic/643-triton-cross-section-timber-list/ Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
sonicmcdude Posted July 11, 2018 Author Share #35 Posted July 11, 2018 Jacek sorry for the late answer. I used some 6 mm ply for the frames. But I don't know why the keel part of the frames was little bit tick. I think it was the variation of the thickness of the ply so I had to sand this part on the thickness sander. I didn't work on my model a long time because moving to another country and lot of other thinks and I hope I will be back soon. All the best and good luck... Greetings Sinan mtaylor 1 Greetings, Sinan Build log:TRITON POB 1:72 Link to comment Share on other sites More sharing options...
Recommended Posts