Jump to content

SaturnV

Members
  • Posts

    167
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Location
    Colorado

Recent Profile Visitors

987 profile views
  1. Hi folks! I did not know until today that I could post pics of other types of kits than ship models. I have built plastic models of just about everything over the years and this is my first diorama that I built almost two years ago. For me, wooden ship model building requires me to have a certain frame of mind - it takes concentration and problem solving that don't come easy for me. So, I have to do plastic model bashing to get to the point where I feel confident about working on wooden ships. This is one of those projects that got me back to wooden ships (namely the paddle wheel ship The Reti V.). This is two Tamiya kits that I put together and placed on a wood fiber board base that I covered with play sand, spray glue and some store bought bushes and shrubs. The M40 was made with an after market barrel and the ladder is just scrap wood. The CCKW truck is stock with a balsa wood airplane tissue scratch built tarp and additional bags and boxes from a Tamiya extras kit. I purchased additional ammo shells to get a complete set that would be carried for this type of motor carriage gun. The figures came with the M40 kit and were my first attempt at modeling scale people. The diorama was based on a photo I found on the internet:
  2. Completed. Below are some pics. The kit was good. If made like the manufacturer intended, it is a nice decorative piece to display. I always want my models to look like the real thing as much as my skills will allow and buying two of the kits provided adequate material to do so. For those who have made this kit before you will notice parts meant for other areas being used for adding detail such as the flag pole base at the bow and the arch over the stairs. My only regret is that I did not realize until too late that the deck floors need to be widened by probably 1-1/2" (3/4" on each side) to make it more realistic. In doing that I would have probably added a 5th wheel to the paddle as well. I hope my model inspires others to work towards realism by building beyond what the kit instructions call out. Scratch building is not as hard as it sounds and you don't have to be perfect to make a good looking model. Mine is certainly not perfect but I accomplished what I set out to build. Happy sailing, SaturnV
  3. Hi folks, I have this model almost completed and will post pics soon. Because I purchased two kits of this model I have a lot of cast metal items, eyebolts, nails, and some laser cut items left over. I will say I don't have any of the curved sections at the ends of each deck because mine broke just like everyone else's did. 🙂 If in the future someone breaks a part or did not get something in the kit it may be faster to PM me and I will send you replacements if I have what you need, rather than trying to get them from Art Lat. SaturnV
  4. Got the second deck built. Sanding and touch up painting to come. I used xtra wood from the second kit to build the railings and the bulkheads at the stern. I think it looks more accurate than the kit plans now. To get the railings to be vertical instead of tilted inwards, like kit plans show, I had to add material to the width of the third deck. Third deck rail is doll house trim off of eBay. SaturnV
  5. At the beginning of the Pandemic it looked as though Art Lat might go out of business. Most of their models available in the US were sold out and the ones left were disappearing quickly. Having wanted to build this model for a long time I decided to buy one before they all disappeared. For Art Lat though, there are always missing parts, insufficient quantities of parts, or poorly cast parts. So, to combat this I bought two kits. It turned out to be a smart move. To this end, below are some pictures of the progress. There are many inaccuracies in this kit, things that are not scale, or just would not work when you try to fix the problems. So I am scratch building items as I go along. Additionally I did not like the spiral stairs so I changed them out to a more traditional staircase. Its worth noting that I built the stairs three different times to get them right. That alone took 2-1/2 weeks to get where I am now. The top deck, its roof, and the upper white railings are not glued in place yet but were placed there for pictures. Lots of sanding to do still. BTW, I purchased new windows and doors for the upper deck as the cast ones are not well done in my opinion. The white color I feel is more accurate. I used a white wash pickling stain from the hardware store to get the effect. It takes at least 7 coats on each piece you make to get this depth of color. I kept the red and brown colors for the doors and windows. I know that is inaccurate but it needed some color to match the lettering of the name. All in all it is a fun model to build and worth the effort. Oh, and the name of the ship is my wife's name "The Reti V." (pronounced Reetee) She was all flattered by it when I showed her what I had done. SaturnV
  6. Well, I have been gone from the forum for 5 years now as I tended to Capt' Buddy's medical problems and every other problem that found me along the way. Sorry to say that the Capt' is 13 years old now and has reached the end of his voyage. We will miss him very much and building ships will not be the same without him by my side. Once I get over this I hope to return to the Triton. It stills sits waiting for me, just like I left it, albeit a little dusty. Richard
  7. I heard back from Jim - thank you for the e-mail address Keith. He's still out there. Ropewalk not really available anymore though. Richard
  8. I don't have that one but will try it out. Maybe they are on vacation or something..... thanks, Richard
  9. Anyone been in contact with Byrnes Model Machines? I have been unable to get through with calls, e-mails, the website, or PM's from this website. I finally saved up enough for the ropewalk but it now says call for availability. Maybe the ropewalk is no longer available.... Richard
  10. Let me add to the above description: If you heat it or outright burn it, it stinks worse than a skunk. You want to aggravate a bothersome neighbor? Throw some ro in your fireplace! It has two different colors in the younger pieces - a yellowish white outer layer and the chocolate brown inner layer. The ro around my area has thorns. The ro in my area has shaggy peeling bark. I will agree that it has distinctive tree rings but the rings are wide. For the small pieces we use in models an entire part can be cut from a single ring so that you only have one shade that shows. Richard
  11. Just found this thread after being away from the forum all summer. I'm the one who switched the Russian olive (ro) wood out to crab apple. My ro stem started chipping away whenever I bumped it so I switched to a stronger wood. The ro only appears to have pores like oak when first cut but once fine sanded and stained it takes on a smooth and solid chocolate brown. It is strong for beams like decks and even as planking. It just does not hold up to being cut into points. I'm using it for all of the decks inside of my full build of the Triton. Stay tuned for my posts as I get back into the model after being away all summer playing with rc trucks. I'll try and post some up close pictures of the ro wood once sanded and finished. Caius, didn't your pen turning come out nice using ro wood? Richard
  12. You want to learn how to plank correctly? Get the Model Shipways Bounty launch. The planks pre-spiled so you get to see how the planks should look before they are applied to the frames. The model is accurate and is a decent scale so that your not fiddling with tiny parts. The model will teach you a lot. Richard.
  13. Hello all, Life has really gotten in the way for the last 2-1/2 months but I have slowly been able to put some time in on these every once in a while. I am down to 4 little boats because I don't like how one of them is coming out so I put it aside. I did notice over the weekend that I have done the stern incorrectly. I have it 90 degrees to the keel but it is to be slanted. I'll have to remove what I have done in that area, sand the stern at an angle then put on new parts. I did a test on boat 5 yesterday and it will work - just takes affort. Going to try and get back at it this week every day after work. I wanted to have these done by March 1st.... Richard
×
×
  • Create New...