Search the Community
Showing results for tags 'gun'.
-
Hi Folks, Building models is always open to individual interpretation and I fully respect what everybody does but I am wondering if somebody can assist me. Gun tackles are always a challenge in whether to include side tackles, train tackles and breech ropes and I appreciate all the intricacies involved. However, there is one aspect of rigging that I have not resolved - in my mind, at least - due in part to a post I read on MSW by Stockholm Tar, 21 July 2014 ... that I had kept in my own files ... “Ropes left lying on deck would probably never dry out, being repeatedly wetted by either salt or fresh water. If you consider a deck (with rope coils laid on it) which has just been rained on, or a sea has come over the side, the deck itself might gradually dry out, but you can bet that that part of it under the coils will still remain wet or damp – an ideal situation for rot to set in. Apart from that a heavy sea coming aboard would also leave the coils in a hopeless tangle, so coils on deck are also a safety hazard. From experience, the only time you would normally see a large amount of rope on deck, is when the ship is either setting or furling sail, or engaged in some manouvre such as tacking or wearing… The last order normally given after such an operation was to 'tidy up the spaghetti' – ie, coil up, and hang the running rigging from its pin “. Many modelers like to show the side tackles in a tight coil, sometimes known as a cheese, beside the gun, but I think this was usually only done for inspection purposes … During action of course, they probably wouldn't have been coiled at all”. Majority of builds have the barrels projecting out and are therefore ready for action. So ... it appears that when builders attach the side tackles, a few add the rope coils onto the adjacent deck but most just don't show this excess rope at all. If this rope is hung as suggested in the above quote, there must have been a series of pins along the inner bulwark walls ? Does anybody have any specific comments on this and especially a photo or two to show these ropes hanging during the normal running of a ship ? Thanks in anticipation, Pete
-
Greetings from Sardinia Island, Italy. This is my first post here. I would like to share my project, a 36lb naval gun from XVIII century. When I bought the Mantua kit of this model I soon realized it was very inaccurate under so many aspects. After some researches I decided to save the gun, wheels and the deck, scratch-building all the rest. The final result is quite satisfing for me, at least compared to the starting kit. Later on will post some pictures related to some steps in building this model. Unfortunatley didn't took many pictures while progressing the work.
-
Well, after researching as much as I could from the many contributors to this and other forums regarding how cannon should be rigged I made the call. For the main deck 6-pounders I went with breaching lines and frapped block and tackle. I made the choice to coil a small amount of line at each side of the gun rather than try to have all the line taken up with frapping. Unfortunately I went with french coils next to unfrapped block and tackle on the 10 cannons that are visible on the gun deck. I guess I'll just need to direct any inspecting admiral to the gun deck as quickly as possible. I had used zip seizing on the block and tackle on both decks. That worked well and looked okay on the 12-pounders that didn't have frapped lines but it would have been better - and easier - to leave that seizing off the rigging that was going to be frapped. I think the look on the main deck is more of a ready-for-action look than the coiled lines. I plan to bend sails to some of the yards and have some furled or perhaps on clewlines. My hope is to give the appearance of a ship at sea rather than at anchor. Richard Current Build: AL L'Hermione
-
Does anyone have drawings (preferably 1/60 scale - but I guess beggars can't be choosers) for 4 pounder guns as carried on the bounty? I am building the Amati model and I'm not overly impressed with the supplied cast metal carriages so I want to build some "more correct" ones. Searching the net brings up loads of 18, 24 & 32 pounders but none of the little ones! Looking forward to your help...
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.