Jump to content

Recommended Posts

My model of A J Fisher's Bluenose built in the 1980's showed signs of fitting deterioration many years back. I removed the model from the case and removed many of the fittings save the mast bands since all the running rigging would have had to be redone.

 

Recently I modified the case (a mahogany framed case with glass sides) by installing a hidden DC fan in the case bottom vented to the outside. It is on a programmable timer so the fan runs every 6 hours for 1 hour to evacuate the case. It seems to be working and I have no signs of further deterioration.

 

Now I am aware of the history of these early fittings as referenced on the NRG site. My question is the following: "I have kept the removed fittings in plastic cases all these years and they show no sign of degradation, does any one have any idea why"? I am tempted to re-install in the modified case. Is my experiment just a delay of the inevitable? Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...