thibaultron Posted May 25, 2016 Share #1 Posted May 25, 2016 I have an old style table top Dentist Drill, that I want to use for carving, but there are no belts with it. Does anyone know where I can buy some belts for it? Quote Ron Thibault Shipjack Carrie Price from Pyro kit, with upgraded detailing and history. Going From A 2D Drawing To A 3D Printed Part Tutorial Link to comment Share on other sites More sharing options...
mtaylor Posted May 25, 2016 Share #2 Posted May 25, 2016 Ron, Google the model number and manufacturer. Then change the parameters like adding the word "parts" or "belts". If you don't have those, then it's measure the belt length and width and Google for that. A quick Google on what I can make out EMESCO (it looks like) yields this: https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=emesco+dental+drill+belt slow2cool, thibaultron, WackoWolf and 2 others 5 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
thibaultron Posted May 26, 2016 Author Share #3 Posted May 26, 2016 Neptune; Thanks for the link! I've book marked the catagory, and will be getting some in the future! mtaylor 1 Quote Ron Thibault Shipjack Carrie Price from Pyro kit, with upgraded detailing and history. Going From A 2D Drawing To A 3D Printed Part Tutorial Link to comment Share on other sites More sharing options...
HSM Posted May 26, 2016 Share #4 Posted May 26, 2016 Try mcmaster.com. Everything mechanical including belts. thibaultron and mtaylor 2 Quote From about as far from the ocean as you can get in North America! Link to comment Share on other sites More sharing options...
tlevine Posted June 1, 2016 Share #5 Posted June 1, 2016 I have gotten mine on EBay. Here is a current link. http://www.ebay.com/itm/Keystone-Plastic-Engine-Belt-8-9-Single-belt-for-Dental-Jewerly-Handpieces-/311610258678?hash=item488d6b34f6:g:694AAOSw1KxXM0QJ mtaylor and Canute 2 Quote Toni Chairman Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Current Builds: NRG Rigging Project Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section Gallery: Hannah - 1:36 scale. Link to comment Share on other sites More sharing options...
wefalck Posted June 14, 2016 Share #6 Posted June 14, 2016 The green Chinese stuff in general is not so bad, just got another batch for my lathes/millers. However, if you can find a source for the original 'Polycord', which is a Swiss product, you will be probably happier, as it streches less and has a better grip. Polycord and its clones are available from 2 mm diameter up. ... still trying to find a source that will sell me few meters of Polycord without a surcharge of 70€ for minimum orders. There used to be a shop specialising in transmission belts in Vienna that sold it off the reel at the real price, but they threw the towel a few years ago (like so many small speciality shops). BANYAN, thibaultron and mtaylor 3 Quote wefalck panta rhei - Everything is in flux Link to comment Share on other sites More sharing options...
Bob Blarney Posted June 14, 2016 Share #7 Posted June 14, 2016 Beltsforanything.comGood, prompt service, reasonable prices. mtaylor and thibaultron 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.