Jump to content

Le Mirage by fnick - Corel - 1:75 - wood


Recommended Posts

Hi everyone

 

Since I have restarted my build of Le Mirage I thought it was time to resurect my build log from the ashes of the Great crash of 13! :)

 

This will be more of a summary rather than a detailed log. Lots of pictures, some words. You never know some of it might be interesting! :P

 

I started this build 3 years ago. Yes progress is slow but in my defence having two children in that time has somewhat limited build time... ;)

 

Comments/criticisms/etc gratefully received. Always good to get feedback of more experienced modellers.

 

Anyhoo enough of the intro. Hope you're sitting confortably. Popcorn ready?... Good.

 

A few box content pictures to get going

 

The box

post-600-0-88642300-1397165515_thumb.jpg

 

Inside the box

post-600-0-32615600-1397165567_thumb.jpg

post-600-0-13818000-1397165581_thumb.jpg

 

This is my second build after the Billing Bluenose and I have to say I was very impressed with the quality of the materials. However the bulkhead slots needed some adjusting...

post-600-0-34702200-1397165681_thumb.jpg

 

All the bulkheads in place

post-600-0-46572600-1397165760_thumb.jpg

 

Unfortunately I didn't notice until way too late that the first one was higher up than it should have been. First mistake (and not the last! :D  )

 

The slots in the bulkheads are used to determine where the gun ports are.

post-600-0-81678600-1397165921_thumb.jpg

 

and again

post-600-0-98521900-1397165964_thumb.jpg

 

although that didn't stop me forgetting some gun ports (told you there were more mistakes!)

post-600-0-04829500-1397166082_thumb.jpg

 

Well that's the limit of 8 photos per post reached. Until the next post...

 

Nick

Link to comment
Share on other sites

gun port omission (see previous post) now corrected... :blush:

post-600-0-50043100-1397166406_thumb.jpg

 

After that it was "just" a question of applying the first layer of planking

 

in progress

post-600-0-95693200-1397166492_thumb.jpg

 

and voila. Finished! easy. :P

post-600-0-87521000-1397166520_thumb.jpg

 

However...something was amiss at the stern...

post-600-0-13734600-1397166674_thumb.jpg

 

so drastic measures were required...

post-600-0-18753800-1397166714_thumb.jpg

 

and the original booboo was fixed.

post-600-0-07634900-1397166778_thumb.jpg

 

At this point can I say to anyone who hesitates in making a fix. Dont! Once you've ripped up what was wrong, well, you can't leave it like that so might as well do it properly! :D

Seriously I was tempted not to fix it. But I'm glad I did.

 

And finally a couple of pics of the first planking filled and sanded.

post-600-0-06320500-1397167007_thumb.jpg

post-600-0-89811500-1397167044_thumb.jpg

 

That's it for now. Thanks for looking in.

 

Hopefully I wont keep you waiting for the next installment too long.

 

Nick

Link to comment
Share on other sites

Evening all

 

The next step was to plank the bow. Not wanting to follow Corel' instructions for reasons shown below...

post-600-0-11569700-1397336923_thumb.jpg

I tried to come up with something a bit more realistic and after getting some inspiration from the Ancre website, followed by some good tips from Danny this was the result

post-600-0-21395200-1397337034_thumb.jpg

which you will agree (well hopefully :) ) is better than Corel's suggestion!

 

Next step was to mark up the frames in preparation for the second planking

post-600-0-97558400-1397337138_thumb.jpg

followed by the stern planking

post-600-0-06294700-1397337333_thumb.jpg

 

And then the second planking started...

post-600-0-57134300-1397337426_thumb.jpg

post-600-0-55523600-1397337446_thumb.jpg

and I'm sure you noticed on that last photo that I was still having issues with gun port location :D. Ho hum...

 

Only one more catch up post to follow and this log will have caught up with my progress.

 

TTFN

 

Nick

Link to comment
Share on other sites

Hi Nick,

 

It should be about time that you do something  :D  :D  :D

I will follow you further with this !

The stem looks great with that patron !

 

animaatjes-sjors-94584.gif

Link to comment
Share on other sites

Thanks Brian and Sjors for the comments and Aussie048 for the like. I'm not planning to go scratch build crazy (famous last words :D ) on this build but the stem I had to change!

 

Yes Sjors you are right I really need to catch up with you on your Le Mirage build. oh wait you've already finished it... :blush: :blush: :blush::D

 

Nick

Link to comment
Share on other sites

Link to comment
Share on other sites

No worries Nick,

 

I've been coming to England in June for two weeks to stay with Mobbsie and his Admiral and I don't have hostile intentions !

Only friendship !!!!!!!

A little late ,but congrats to you and the Admiral of the birth of your daughter !

A Kings couple....boy and girl.

Enjoy them, they are old before you know it  :D

 

animaatjes-sjors-94584.gif

Link to comment
Share on other sites

  • 2 weeks later...

 

A little late ,but congrats to you and the Admiral of the birth of your daughter !

 

Thanks Sjors!

 

Evening all

 

I decided to take the plunge and line the hull off according to Chuck Passaro's excellent tutorial. I didnt' want to use the wood supplied by Corel as I found it too light so decided to carry on with using walnut. I bought some 5mm wide planks and some 100mm wide sheets for the curved sections. All fine and well until I got both and realised the two didnt seem to be the same wood... :huh:  or more specifically the 5mm strips did not look like walnut

 

So ordered some more from a different source and got the same stuff... double :huh: . Given that my finances were (are... :D ) not illimited I decided to cut the 5mm planks from the 100mm sheets. Downside to that is that it takes a loooooong time to do the second planking. Hopefully it will be worth it.

 

First step was to break the hull down into sections:

post-600-0-67892400-1398203844_thumb.jpg

post-600-0-25078600-1398203871_thumb.jpg

and finally

post-600-0-82716600-1398203893_thumb.jpg

 

And so the second planking of the hull started. As a picture is worth a thousand words...

post-600-0-14328000-1398203988_thumb.jpg

post-600-0-67309300-1398204003_thumb.jpg

post-600-0-51018400-1398204030_thumb.jpg

post-600-0-76515800-1398204048_thumb.jpg

and finally again

post-600-0-40035100-1398204064_thumb.jpg

 

And that brings me up to date. I'm not going to be posting updates quickly from now on since I only have time to do one planking strip a week on average and I have about 35 strips left :D. I do like doing planking but I have to admit I'll be glad when it's over :D

 

I'll try and post some photos when I complete a section.

 

Thanks for looking

 

Nick

Link to comment
Share on other sites

Some great work and some fabulous planking Nick B) Spiling the planks and laying in a contemporary model style will always look the nicest.Yes it is a lot of work cutting the planks out but the results are well worth it.I found the hardest bit to get to look right was the bow end of the garboard plank.You have to stand the model right way up and looking from the horizontal,try to get the end so it looks like it flows in a sweeping curve from the side.This dictates the radius you cut on the end.It took a couple of goes on Caroline to get this to look right.

 

Kind Regards

 

Nigel

Edited by NMBROOK

Currently working on Royal Caroline

Link to comment
Share on other sites

Now, this is a nice looking ship, Nick, and I can tell you are off to make a nice build out of it.

 

Your planking jobs looks very clean and even. Congratulations!

There aren't but two options: do it FAST, or do it RIGHT.

 

Current Project Build Log: Soleil Royal in 1/72. Kit by Artesania Latina.

Last finished projectsRoyal Ship Vasa 1628; French Vessel Royal Louis 1780. 1/90 Scale by Mamoli. 120 Cannons

 

Future projects already in my stash: Panart: San Felipe 1/75; OcCre: Santísima Trinidad 1/90;

Wish List: 1/64 Amati Victory, HMS Enterprise in 1/48 by CAF models.

 

So much to build, so little time!

 

 

Link to comment
Share on other sites

Thanks Nigel and Ulises for the comments and Aussie048 for the like.

 

I knew it was a good idea not to post any close-ups :D

 

Seriously it's nice to get feedback. Thanks Nigel for the heads up on garboard plank. I have found that turning the ship the right way up to check planking does help. What looks straight upside down isn't necessarily!!

 

Nick

Link to comment
Share on other sites

Nick,

 

You can make close-up pictures !

Nothing wrong with it !!!!!!

That looks great that walnut .

Go on like this and your Le Mirage will end up in a museum  :D  :D

 

animaatjes-sjors-94584.gif

Link to comment
Share on other sites

Nick,

 

Happy to have looked in on your Mirage. Looks excellent. Beautiful hull, bow planking. Nice.

 

Michael

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Thanks Sjors and Michael for the comments although I'm not so sure about the museum one though :D

 

Interestingly enough Corel used to supply walnut for the second layer of planking. Says so in the instructions (still) and you can see that on the photo on the box (start of the log). Wonder why they changed to a lighter wood.

 

Nick

Link to comment
Share on other sites

Link to comment
Share on other sites

Hi Nick, very nice work on your Le Mirage :)  I am about to start the Corel Unicorn, and actually spent last evening mapping out how to modify the one-piece keel piece to add the stern post, keel, false keel, and various components of the stem.  Your approach is exactly what I'm planning to do and it's nice to see it executed in a beautiful way :)

 

One thing I'd note - in my limited research, it looks like the scarph joints for the keel run a bit differently - essentially run vertically, so you don't really see the long joint.  I could be wrong though.

 

I'm subscribing to your log and look forward to your progress!

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Hi Sjors

 

Haha yes you can imagine it. "What no more walnut. Oh well this will do..." :)

 

Thanks for your feedback Mike. Interesting comments about the scarph joints. I took my inspiration from drawings I saw on the Ancre website but have to admit I didn't really research that area (or any...) properly. Maybe just two different ways of doing them I guess?

 

Nick

Link to comment
Share on other sites

Thanks Nigel!  Learned something new tonight :)

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

  • 4 weeks later...
Link to comment
Share on other sites

Evening all

 

Thanks to WackoWolf, maggsl_01 and Aussie048 for the likes.

 

Thanks Nigel and Sjors for the comments.

 

Nigel I am cutting the planks from sheet with a X-acto knife (haven't got space or money for power tools...yet...hopefully :) ) It's not too bad but I think I could benefit from getting a ship's curve for the curved sections. I'm finding it quite difficult to get nice smooth curves.

 

 

and then the fiddly stuff  :P  :P


You mean to tell me this is the easy bit??!?! :P:D

 

Nick

 

Link to comment
Share on other sites

I think even if you did have a scroll saw Nick,the walnut might be prone to breakage with those curves.Even with pearwood on caroline I had the odd few planks relegated to recycling due to breakage.Yes a set of French/ships curves is on my list.I have one of those flexy curves but could I find it :angry: It will turn up when I have no immediate need for it :huh:

 

Kind Regards

 

Nigel

Currently working on Royal Caroline

Link to comment
Share on other sites

  • 5 weeks later...

Evening all

 

Small update. Another planking section complete. Getting there despite the fact this build sometimes makes me feel like a slow snail at the bottom of Mount Everest... :)  Looking up... :D

 

Anyhoo enough terrible jokes. Here are a couple of progress pictures:

post-600-0-59094700-1403735085_thumb.jpg

 

post-600-0-15117200-1403735103_thumb.jpg

 

Nigel a belated thanks for the comment. Yes walnut can be brittle although the stuff I'm using now is far better than what I had when I planked the keel. Now that was horrible stuff.

 

Thanks for looking

 

Nick

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...