Jump to content

Red Dragon by janet bode - Artesania Latina


Recommended Posts

Janet B

            Thank you for your kind comments edmay,as regardrs Red Dragon the deck is made from lemon wood it is a wood i like using, i bought a log

and had it riped down to manageble sizes. The deck is fully treenailed and as far as i could research to scale,although it is very difficult to gain info

about Chinese Junks.Upper planking is Lime,headrails are made from flexible Beech as the curves can be tricky,i discarded the cast windows

and built new ones as i felt i wanted the practise,the rudder shaft is splt half way from the tiller it made it easier it will be eventually joined.

                                         Hope you find this interesting.

                                                                                            Janet           

Link to comment
Share on other sites

Janet, I´ll follow your build. The 2 of us are constructing this kit and is great to see each one is a really singular ship. Yours is a neat job. Great!

Link to comment
Share on other sites

She is simply quite beautiful.  Thanks for sharing her with us.

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

Very well done, Janet.   I'm looking forward to more.

 

By the way, I merged your two topics on this.  To keep things together, just scroll the bottom and use the box labeled "reply to this topic". 

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Hi Janet

 

congratulations - you do a phantastic work on your model. looks very very accurate. It is as Vivian said before: 2 modellers, one kit - two differnet ways to look at a model. It is interesting to see and compare.

 

Best wishes

Max

 

:10_1_10:

Next: Friedrich Wilhelm zu Pferde by Euro Model 1:47

 

Finished: Half Moon Corel;  HMY Royal Caroline Panart; HMB Endeavour Occre 1:54; Fregatte Berlin, Corel, 1:40

 

 

A life without dogs is possible... but worth to live?

Link to comment
Share on other sites

Link to comment
Share on other sites

That is some really lovely work Janet! Please keep posting more progress pics.

Link to comment
Share on other sites

Hi Janet,

 

What a good looking ship - well done.

 

You say its a kit from A-Latina, but that you have had a lemon wood log ripped down to manageable sizes - does that mean you have replaced the timber that was in the kit? 

Link to comment
Share on other sites

Janet B

            Hi Frank

                             I replaced all of the decking and used Lemon wood (i tried to order Boxwood but my supplier said he only had Lemon, he said it was similar but i am

not so sure) however i find Lemon quite a nice wood to work with.All of the gunwale rails i replaced with Flexable Beech.

Link to comment
Share on other sites

To all of you who made such nice comments about my model i truly thank you.

 

The Red Dragon is my first model in a sense because i bought one Red Dragon from Antics it was the only wooden kit they sold,

so when home and atacked the kit i got as far as completing just the hull,i had just joined MSW SO When i compared my workmanship

to some of models in the gallery i realised my model was a bit of a mess so i put it in the trash bin the refuse collecter picked it up and 

put it in his cab.I Went back to Antics to see if they had anything i could buy and there on the shelf was another Red Dragon kit so now

i had bought severel  books the result is as you can now see.

                    Regards to all Janet B

post-2934-0-20212000-1412916443_thumb.jpg

post-2934-0-23451000-1412916925_thumb.jpg

post-2934-0-83663500-1412917082_thumb.jpg

post-2934-0-59637600-1412917511_thumb.jpg

post-2934-0-97064400-1412917554_thumb.jpg

Edited by Janet B
Link to comment
Share on other sites

Doesn't matter what you are making, having something to see and aim for is a great help setting the standards and quality and you can see what is possible. Great work on this one. Can't help but think that, that driver must have seen something to admire and save in your first efforts, maybe you dropped the seeds for a new modeler..

jud

Link to comment
Share on other sites

Janet, happy to know you persevered cause you reached an awsome result. I´m anxious for your next pics ^_^ ^_^ !

Link to comment
Share on other sites

  • 4 weeks later...

I have posted further pictures of my Red Dragon build as you can see i have added arnement.The guns took me five attempts untill i was satisfied,

iI made up blanks for all of the sides spot glued them together and machined them all in one go, they all came out exactly the same i was quite pleased

with the results. I made a simple jig for the trunnion clamps all of the guns are fitted with wedges i have not added any tackle to date i am considering

whether too or not. hope you find my build of interest.

                                                                      Kindest regards to all janet (bode)

Link to comment
Share on other sites

The ship is very sharp looking.  Shows you put allot of time and thought into every piece.

Current Build Log(s):

-Swift Virginia Pilot Boat 1805- Artesania Latina 1985 no sails kit.  My first wooden ship build.

Carrack - Woodkrafter Kits

 

Completed Build Log(s):

-Pirate Ship- Woodkrafter Kits Ship in a Bottle - First ship in a bottle kit build.

-The Secret Revealed Boat in a Bottle Kit- Authentic Models - Ship In Bottle

 

On the Shelf to build:

- Build a Ship in a Bottle Kit - Authentic Models

- The Chesapeake Bay Flattie - Midwest Products

- Armistad 1832 - Serial Modellbau

- San Gabriele 1497 - Serial Modellbau

- Clara May English Ketch - Artesania Latina

- Santa Maria - Scientific

- Margaretha - Tris Model

- Paranzella - Tris Model

Link to comment
Share on other sites

  • 2 weeks later...

Hi everyone.

Thank you all for your most kind comments about my Red Dragon,i gave a lot of thought about the guns i thougt it

a little strange that they were fixed on to the deck,it bothered me so much i started to make them on trucks although

i felt a little uneasy,it was then i spotted the sketch of the guns being loaded outboard that is to say one of the gun crew

climbed over the gun rail sat astride the barrel and proceed to load, a little precariose in the heat of battle.

So that is what i settled for, has anyone any further thoughts on this i would be intrested on any details.The ship incorperates

some details may-be not found on Junks but i used the kit to practise my workmanship so i must appologise if some parts are not

true to the type.

bye for now, Janet.

Link to comment
Share on other sites

  • 1 month later...

Thanks to everyone for your very kind comments,as i am very disabled it does take me considerable time to build,so i hope to post

pictures in the future. I am at the moment attempting to make the sails for my Red Dragon of course i am on home territory here,

it seems to be dificult to find any infomation as to how they are made eg: which way do the panels run and also which side of the sail

bamboo strechers go, ideas would be most welcome.

Bye to all Janet B

Link to comment
Share on other sites

Janet, I´m struggling with my sails. At first I was all about using the kit´s cloth, but now, I´m not so sure. Thing is the sailcloth AL provides feels too industrial, so now, I´ll research a little bit more before installing the sails. The bamboo should be behind the sail as for all images I´ve seen till now.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...