Jump to content

olopa67

Members
  • Content Count

    35
  • Joined

  • Last visited

Everything posted by olopa67

  1. thank you vossiewulf, I had found few pictures of the cannon and how they have been rigged, so many different ways, probably due to my inexperience I should take the easiest way and start studying how to actually perform the rigging (kinds of knots, wrapping and coil and how to make them). any resources on this topic are also welcome πŸ™‚ I know I choose a difficult kit for a beginner, I challenging my self hardly and perhaps I should have taken a more humble model. I m not giving up tough and I love this site full of people of knowledge and very keen to help. thank you for time
  2. G`day everybody, I have to start building my first ever cannon ( I m making the Revenge Kit from Amati) does anyone have any links to video and/or instruction on how to make them? the actually assembly of the cannon itself seems pretty straightforward my biggest concern is the rigging part (I never rigged anything before so this will be my first attempt ) I need all the possible visual information on how to do the rigging. if anybody can help me out I will be very grateful. thank you for your time Paolo
  3. it's look awesome Jeff, so many advices. i use more your Blog than amati manual. im very glad i met you here.
  4. thank you vulcanbomber, as i previously mentioned to xodar i have no experience and may be i relay too much to the instruction and panicking a bit too easily if i see discrepancies with the manual. i really appreciated your support and advice.
  5. thanks Jeff my concerns come from mine unexperience, i tried only once before to make a model and i completly stuffed it up. but was a good learning experience....on not what to do. :-). love your help really appreciated. i saw the way you planked the edge of the decks and i will definitely start to use it from now, much cleaner finish. thanks again
  6. First ladder installed, once again measurements from Amati instruction are wrong, far to wide to fit, Now with the upper back deck. what is shown in the manual is a bit different of what you ll find in the kit. the frame for the access to the bottom deck appear to be aligned with the beginning of the planks but I had a dry plank on and there will be space for an extra plank, same for the mast hole, the space in between the hole and the lower deck access is far less in reality than what is shown in the manual, I m hopping this will not create major issues later on
  7. Another deck up. This deck makes two steps that need to be planked, one with 0.5mm x 5mm and one with a 1.5mm x 8mm plank, there is no plank with the measurement requested so I had to make them. I had also found that the length suggested by the manual appear to be incorrect (too short) so I used the part 9A as a guide which also gave me the right angle for the cut The bow deck is also planked, a bit hard to put it in place, you need to carefully bend it, and it is a bit scary, i was just waiting to hear the snap sound :-) ...did not happened. Amati want you to fix the support beams temporally with nails to give the structure some rigidity, i opted to use two elastic rubbers, less invasive and if really needed i can always put the nails later on. I can sense problems to fit the bowsprit later on, i hope to be wrong. So this is where i m now
  8. the Back deck present 1 little issue with the manual provided which make hard to understand if you should plank the deck all the way to the back or leave some clear space. Go on page 11 and you can see that they want us to leave some space un planked. They did not mention this previously and they did not say how big should be the gap. I personally left a space of 5mm, hopping for the best. "The pessimist complains about the wind; the optimist expects it to change; the realist adjusts the sails." β€” William Arthur Ward, Writer
  9. Here we go! the main guns deck is been planked and put on place. the finish was sending, 1 coat of bench oil, 1 coat of wipe on poly,1 coat of matt varnish and sanded again, I know I probably exaggerated a bit with 3 coats but I m not in rush and did a bit of experiments, I would probably not apply the first coat of oil bench in the future. I had a bit of problem of shaping the two holes, I guess because the deck is split in two halves and when I join them the two half hole was not symmetrically finished. thanks @xodar461 for your advice I managed to correct the shape by rolling a bit of sand paper end run it trough the holes, much easier than using a curved filer. the access to the lower deck is not the best but I didn't give too much attention it will cover anyway by the grate support and if still visible I will file it later. once again any advice is more the welcome and thanks again to Jeff for answering my question, especially the silliest ones. πŸ™‚
  10. you are welcome, not sure if it will be an enjoyable watching. πŸ˜‚πŸ˜‚. i m not very experienced and know that there is someone around make me feel more comfortable. lots of question will be asked.
  11. Lower deck glued with no issues. The support for the gun deck which have to be glued after the lower deck shows a gap (see picture) of about 1mm, so I have place a bit of wood (planks from a previous model with 0.5mm thickness) on both the ends. Don’t want any surprise later with alignments, two of the supports have some kind of slots and I try to have them aligned the best I can, just in case. Of course I have had trimmed the excess of the inserts 
  12. Lower deck planked with no major issues, the instruction shows the deck in one single piece but it come actually split in two, not a problem just glued the two halves. After getting few advice from more expert members I decided for 10cm planks with a slide up of 2.5cm and a pattern of 4 repetitions. I took the risk to buff the deck with some clear bench oil (was in the lower deck anyway ) you can see the difference with the oil on end without it. Pretty happy with the result. Should I apply varnish? Open for any advice. For the more expert that will read this if they can spot any mistake or have any improvement or tips to give, I m very happy to receive them before the other decks start.
  13. Hi John i might come for a visit one of.these days with the kids. do you work at the museum?
  14. thank you Bedford good to know that there is someone local.
  15. it help a lot Jeff thank you so much. i will start the planking to night australia time.
  16. thank Mark more or less this is my view as well but i donnt want to end up with a build that i like but looks ridiculously out of contest or proportion. and i dont have enough experience, yet, to know what the boundaries are.
  17. thank you Jeff i will definitely take your offer πŸ˜€. your job looks great and your building log already gave me few useful tips.
  18. Hello Pirates, I m ready to plank the lower deck of my Revenge by Amati and I was wandering what is the rule to calculate how long a plank on the deck should be. the scale of the kit is 1:64, I do not have a clue hoe long in real life the planks usually are. thank you in advance
  19. Hi Richmond and Louie and thanks for the greetings. @Louie da fly yes I started a building log today and I will try to update as soon I make progress.
  20. Just started The Revenge by Amati a couple days ago, after I build my new work bench. the frame is done and now I m proceeding to planking the lower deck . I Have a very basic experience and hopping to find any kind of help of support from anyone willing to do it. I just would like to apologize in advance for my English which I know is not the best being Italian my first language, so please do not shoot on the piano player πŸ™‚
  21. Hi everyone, my name is Paolo and I m from Wollongong NSW Australia. I just started the Revenge from AMATI
  22. Hi Jeff, my name is Paolo first of all thank you for this blog, your model looks very good. i just start mine and it is my first model at this difficult level. hopping for the best. i will definitely use your building log as guide if you dont mind. can i ask you if you have a specific rule on how long you cut the planks for the deck? thank you and again compliment

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to provide support to our members in their efforts to raise the quality of their model shipcraft.

The Nautical Research Guild puts on ship modeling seminars, yearly conferences, and juried competitions. We publish books on ship modeling techniques as well as our world-renowned quarterly magazine, The Nautical Research Journal, whose pages are full of articles by master ship modelers who show you how they build those exquisite details on their models, and by maritime historians who show you what details to build.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
Γ—
×
  • Create New...