Jump to content

Search the Community

Showing results for tags 'bluenose'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • The Captain's Cabin
    • How to use the MSW forum - **NO MODELING CONTENT** 
    • New member Introductions
  • Member's Build Logs
    • Build logs for SHIP MODEL KITS - by era - launch date
    • Build logs for SCRATCH projects - by era - launch date
  • Group Projects on MSW
    • Group Projects on Model Ship World
  • Shop Notes, Ship Modeling Tips, Techniques and Research
    • Nautical/Naval History
    • Discussions for Ships plans and Project Research. General research on specific vessels and ship types..
    • Building, Framing, Planking and plating a ships hull and deck
    • Discussion for a Ship's Deck Furniture, Guns, boats and other Fittings
    • Masting, rigging and sails
    • Model Tips and Tricks and Making Jigs
    • Modeling tools and Workshop Equipment
    • Metal Work, Soldering and Metal Fittings
    • Wood discussion...Where to use it? Where to get it? What types are best? How to Finish it?
    • Painting, finishing and weathering products and techniques
    • CAD and 3D Modelling/Drafting Plans with Software
    • Photographing your work. How to do this.
  • Ship Modeling News And Reviews.....Traders and Dealers...Ship Model Clubs
    • General Ship Model Kit Discussions - NOT build logs
    • Reviews
    • Book, Monograph and Magazine reviews and Downloads. Questions and Discussions for Books and Pubs
    • Traders, Dealers, Buying or Selling anything? - Discuss New Products and Ship Model Goodies here as well!!
    • NAUTICAL RESEARCH GUILD - News & Information
    • Important Ship Model Club News, Links to ship modelling resources and museums
  • The Crew's Lounge
    • Non-ship/categorised builds
  • Medway Long Boat - 1742 - Public group project.'s Plans and Instructions/Downloads
  • Medway Long Boat - 1742 - Public group project.'s Medway Long Boat - 1742 - Public group project.
  • Medway Long Boat - 1742 - Public group project.'s General discussions/How to join
  • Rope Making/Ropewalks's Ropewalk Plans/Downloads
  • Rope Making/Ropewalks's Discussions about Rope Making
  • Rope Making/Ropewalks's Rope Materials and parts resources
  • Rope Making/Ropewalks's Commercial sources for ropewalk machines
  • Intro to carving - typical decorative relief carving for ship models's Build Logs for the Carving Group Project
  • Intro to carving - typical decorative relief carving for ship models's Tutorials and Discussion for the Carving Group
  • Intro to carving - typical decorative relief carving for ship models's How to join this Carving Group
  • HMS Triton - 28 gun frigate's Build Logs for the Full Hull Version of HMS TRITON
  • HMS Triton - 28 gun frigate's How to Join The HMS TRITON Group Build
  • HMS Triton - 28 gun frigate's Cross Section Build Logs for HMS TRITON
  • HMS Winchelsea 1764's How to join this group project???
  • HMS Winchelsea 1764's General project discussions on planking, fittings and monograph chapters
  • HMS Winchelsea 1764's Member Build logs for the HMS Winchelsea
  • Planking Techniques's Planking Downloads and Tutorials and Videos
  • Planking Techniques's Click Here for Topics dedicated to planking!!!!
  • HMS Granado 'Cross Section' - CAF Model's Questions and discussions about building the kit
  • HMS Granado 'Cross Section' - CAF Model's Build Logs for the CAF Granado Cross MID-Section

Calendars

There are no results to display.

There are no results to display.


Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

  1. Hi, Just join this site and what a great site it is 👍 I see that a lot of people (most from Canada) build the Canadian fishing schooner Bluenose 1921 and so happens I am building this too, hope this is not to many do like the shape and lines of this schooner. When I bought this model I also purchased the Fair-A-Frame from Model Shipways as well, while building I did modify it so that head stock would slide in a grove this makes it more ridged and keeps everything nice and square, also they show that the adjusting rail which moves to clamp the keel was at a different height than the one you glue down, so I notched the rail to allow both rails to be the same height, these are small changes which I found really helped. Did not take any pictures of the start when I joined three parts to the center keel once that was dried I took some tracing paper and traced the beading lines and rabbet lines onto the center keel. Next up was to remove 1/16 from bulwark stanchions just below the deck then took some tracing paper and traced each bulkhead so that I could mark out how much beveling I had to do all these bevels were done before gluing to center keel, also bevel inboard bulwark stanchions, once this was done I did a trial fit to see how it all fit. Regards Richard
  2. Well, no rest for the weary, as they say... Finished the Ballahoo and have three more ships waiting for shipyard clearance. As I had indicated in my signature section previously, my son gave me the Bluenose as a gift some 16-17 years ago, when I had never thought about doing shipbuilding as a hobby, and had way too busy of a working life to devote time to this hobby. I opened the box, read some of the instructions, and pretty much thought "Nope, looks too complicated. I'll put it away for another day." So, here we are 16-17 years later and I have found model shipbuilding as a fun and rewarding hobby after all. After three completed ships, it is now time to work on the Bluenose. I think I have learned enough skills in my three previous builds to make my Bluenose looking good. Time will tell. There are plenty of really good build logs for the Bluenose that should help guide me on my way. I look forward to digging into them and doing as much research and observations as I can. Since there have already been plenty of prior build logs, I won't post the obligatory "open the box and look at the contents" picture and post. But, I will point out the difference in the box covers from what it looked like 16-17 years ago (shown in my pic below) and how Model Shipways box cover looks like today. Thought that was interesting. In doing a quick comparison of the instructions included in my Bluenose box to the online pdf instructions available on Model Shipways' website, they look the same, so it doesn't appear the build process has changed much, if at all. So... here we go with another build log! Appreciate all the follows, likes, comments and criticisms that this build log will generate. Thanks!
  3. One of my eBay finds out of my stash. I have decided to break up the marathon task of building railings on the Robert E Lee. I will continue building those railings in the evening as I wind down the day. Here is a link to my Robert E Lee Build My new day job will be the Bluenose Canadian Fishing Schooner by Model Shipways. This kit was purchased for just 78.00 including shipping on eBay. The previous owner had started this kit. The kit was only missing some of the deadeyes and belaying pins. Those were easily sourced from Model Expo and are on order. Today I have laid her out to determine what has been started, the work is salvageable. Previous owner had only progressed to step 5. I have also assembled the 3 piece Keel and started the work of smoothing out the bulk head tapers and Rabbit Joints cut by my predecessor. I have been wanting to build the beautiful schooner since I first saw a model of her in the Bluenose Hotel in Bar Harbor, Maine. Plan to visit Nova Scotia next summer and see The Bluenose II among other things Canadian. Wish me luck, I am hoping my skills are now up to the task of doing her justice. Cheers 🍻
  4. This will be my first attempt at a full wooden ship build. I have built several plastic model ships (Constitution, Cutty Sark and Charles Morgan, all by Revell) and R/C model airplanes but, this will definitely be a test of skill and patience. I started by building the NRG half hull to get some experience with planking. That went pretty well and I learned a lot! I have always wanted to build a model of the Bluenose, as I am from Canada and have been fascinated by this ship for as long as I can remember. I took the opportunity to dig in deeper to its history by reading Bluenose by Brian and Phil Blackman and A Race For Sailors by Keith McLaren. This ship has a fascinating story and, unfortunately, a sad ending for such an icon of maritime history. I purchased the Fair-A-Frame from Model Shipways, as it looked to be the best way to hold the keel while I worked on bulkheads and everything on the deck (and I was able to get it on sale!). I modified it based on the changes that @Retired guy made prior to his Bluenose build. This is definitely an improvement to the unit and really locks in the jigs that slide along the base. I have been procrastinating since finishing the Half Hull, mostly because I am a bit intimidated with this build. Reading through the forums, there are so many talented folks and high quality builds of this model. Time to get under way and I hope that I can do it justice.
  5. This will be my first build and I welcome any comments, suggestions and questions. Living in a duplex that’s built on a slab we don’t have a basement and the garage isn’t heated, so I’m using a desk the spare bedroom. I’ve done what I can to protect the desktop and the carpet below the desk. Since we will be spending the next week enjoying our last camping trip of the season I won’t be able to start my build until the weekend of October 20th. But I do have my work area set up and spent 1 ½ hours doing the kit inventory. My plan is to explain my next step as I go along and then wait for feedback from more experienced model shipwrights before actually doing the work. When I return next week I will be cutting loose the 3 sections of the false keel, marking the reference line and bulkhead stations on both sides and assembling the false keel. Any suggestions on cutting loose the false keel sections without breaking / damaging anything? Any suggestions on the best way to transfer the reference line and bulkhead stations from the plan to the wood? Looking forward to starting my first build, Dave
  6. Greetings MSW users. While researching my project I've found MSW to be a wonderful resource. I especially appreciate the friendly and encouraging atmosphere. No build is too small or question too dumb. All are treated respectfully. So unlike much of our world today. I began modeling while in elementary school and continued through secondary school. Mostly cars and airplanes. Simple plastic models and a few wooden airplanes. The hobby taught me about tools, patience and an appreciation for detail. These skills translated well into my later career. I drifted away from the hobby during college and many years of working. After retirement I began to think about building wooden ship models. Something I had always wanted to do. For my first project I bought a solid hull Cutty Sark model by Scientific Models on Ebay. This 1:200 model was about the size of a plastic Cutty Sark I had built during secondary school. While it turned out OK for a first attempt, It was not large enough to do complete rigging. Only the standing rigging and sheets were practical at that scale. At least for my limited skills. Many fittings and details were only approximate representations. The hull had been started and there were a few parts missing when I obtained the kit. Why Bluenose? I was casting about for an interesting but not too complicated POB kit to challenge me and build skills without being overwhelmed to the point of giving up. My wife was pushing for a fairly large sloop rigged boat to become part of our decor. I picked Bluenose for the beautiful and sensuous lines. It also had interesting fittings and rigging, but was not so complicated as a man-of-war or square rigged schooner. The history of the ship was intriguing. Many research materials and build logs are available. Plus my wife found it acceptable. I studied build logs and researched model kits. The three most popular Bluenose kits were Artisana Latina, Billings Boats and Model Shipways. Artisana appears to be the least accurate. Photos and comments in general were not very favorable. The Billings is very popular and it has some construction advantages. However the build logs complain about inaccuracies. Model Shipways kit appeared the most accurate. I was also impressed they allowed for mistakes by including extra wood. I did find at least one inaccuracy in the plans as will be noted later. None had highly rated instructions or plans. At this skill level that shouldn't be a problem though.
  7. Starting build number 2. Staying with Artesania for this one but a bit more complex than the virginia schooner I started this journey on. Would like to do something like the Ocre Terror but this is my next step in that direction. Unboxed and everything looks good so far (oldest laptop in the house was the only one left with a cd drive which makes this interesting with no printed instructions but I put everything on onedrive to make it more accessible. If anyone is doing this same, I'd be happy to share the files.) Laying out the false keel and bulkheads. As mentioned by others the AL laser cuts are a bit tight so a little filling is needed but I'd rather have that than sloppy loose! I also found a slight bow in the false keel and a bit more warpage between two bulkheads. Soaked it in water for 20 min and sandwiched it between two mdf boards with pipe clamps. With this west coast heat wave, a half day in the clamps took the warpage right out of it. Flater than flat now!
  8. I started a Bluenose in the mid 2000s and was way over my head. Attempt number two began today. Bulkhead K will have some internal character.
  9. Hi all. I’ve started my first build. It was a 50th Birthday gift from the in-laws. Made an okay start but now struggling. I’ve always fancied a go at model shop building and finally now have the opportunity. As you will see by the photograph below, I’ve made an okay start but now approaching a difficult section. I’d wrongly assumed that instructions would be specific, accurate and helpful. What I have in front of me now reads as follows… “Apply first planking. Some nails will help. At stem, leave enough space for cutwater positioning. Check thickness of keel.” It then goes on to say sand hull prior the second planking. okay, so that’s the entire planking instructions!?? Great. Q1) what is leave enough space for cutwater positioning on this ship specifically? Q2) check thickness of keel. Can anyone explain why? What do I do? I’ve read and watched many videos on planking but nothing is the same as this hull. I’ve also seen many videos now all showing several different methods of planking so no idea what to now do. As you will see, the deck is complete, bulwarks on…now the planking. any help will be much appreciated!
  10. Seeing the Bluenose II off the starboard beam of our cruise ship last fall, sparked my desire to build a model of her. She was an awesome sight and I was convinced this would be a great project. Then I started to do some research and figured I needed to cut my teeth on some simpler builds. I purchased Steve Rogers “Model Boat Building Made Simple” and built my first rowing skiff. I had so much fun I went on to build his “Spritsail Skiff” and am now working on his “Skipjack”. But in the back my mind, the Bluenose II was a constant presence. Using the measured drawings from L. B. Jenson and Gene Bodnar’s wonderful Modeling Practicum, “The Queen of the North Atlantic ―The Schooner Bluenose”, I started lofting a 3D model of the Bluenose II in SolidWorks. This has taken me almost a month. It is amazing how intimate one becomes with the lines of a hull through the process of creating a 3D model. I had many false starts, but finally developed a simple set of equations and a table that describes the spline control points for all of the frames of her hull. I imported and scaled the side view, top view as well as the hull lines as my starting point: Resulting in my final model: Now, as they say, it is time to make some sawdust: Now I go into mass production mode as I need to make over 60 frames. It is bizarre timing, but today I reported to work as usual and was immediately sent home due to the Covid-19 crisis. My company is limiting on-site access and having us work from home. I don’t know how that will work out, but at least I have some time to crank out more frames. 🙂
  11. I am new at this so I will do my best with this build log. help is welcome especially with planking since I have never done it before. if these pictures are in file format, please tell me and I will keep trying to make them not files. another thing thanks to Azzoun for providing the model and tools. that's the box. I have made the frame already, though it's not perfect. still needs some filing done to it. thanks in advance for any advice for this build.
  12. This is my second build. I received the Bluenose kit just before Christmas. The Admiral "suggested" I put it under the Christmas tree. So on Boxing Day I did an inventory. All parts were present and accounted for. However, one problem I had was that one of the dowels was badly warped. I emailed Model Shpways and had two replacement dowels in about 2 weeks. Excellent customer service. All the wood was sorted, organized and stored in cardboard tubes. I laid the plans out flat to try to get the folds out of them. I plan on following Bob Hunt's practicum from Lauck Street Shipyards for the most part but will also be using the MS instructions manual plus other build logs on this forum. I also purchased the book Bluenose by Brian and Phil Backman. Toronto: McClelland and Stewart, 1965. According to MS it was a major reference for the kit. Right now I am cleaning up my workspace and getting everything prepared to start this build. I will be pre-occupied over the next few days but hope to get started later this weekend.
  13. I have inventoried all parts and, I am anxious to get started. I have separated the three sections of the false keel and am working on the reference lines, bearding lines and rabbits. I have noticed that the bottom of the stern section is 1/32 of an inch lower than the mid-section. I am not sure whether it should be planed or sanded even with the mid-section or left alone. I am nervous about carving the bearing lines and rabbit. I will make sure all my reference lines are correct and begin tomorrow. Joe
  14. This is my first serious attempt at building a wooden ship model, something I've thought about for years. My wife encouraged me to finally do it this year, so here I go. In addition to the included instructions and plans I'm following Bob Hunt's practicum from Lauck Street Shipyard. I've also viewed most of Gary Brinker's video log and am following CPDDET's build here in the forum. Let's see if I can not screw this up. Inventory of the kit took about two hours, mostly due to my lack of experience reading ship plans. I still have a few Britannia parts I can't identify in the plans, but the total part count added up so I moved on. As I told CPDDET, my kit's bulkhead sheets are....weird. There's some kind of tacky, almost sticky coating on one side of the plywood. Cutting the bulkheads free was challenging with the only blade I owned at the time - a #11 X-Acto. Since then I've gotten some #10 blades which are much better for freeing laser cut parts from the plywood sheets. Up to this point I've assembled the keel and finished cutting the rabbet and tapering the stern. The rabbet came out better than I expected. The stern tapering was the more challenging of the two for me. I have little to no experience carving wood and just tried to take it slow. For some reason I struggled with a #17 chisel blade. It worked well for the rabbet and also the aft edge of the stern, but I had trouble using it to create the gradual taper from the bearding line to the aft edge. For me the #10 blade was easier to control for this task The result was a pretty irregular dimpled surface that I'm not totally satisfied with. I had a couple of mishaps tapering the stern. A small chunk blew out of the starboard side of the stern's aft edge, right above the rabbet. I considered gluing it back it but have decided the stern post will cover it so why bother? It could have been worse and I'm glad the breakage didn't go all the way through the keel. I'm thoroughly enjoying this build. About 9 hours invested so far. Next up -- tapering the stem.
  15. I started this build about 2 years ago then took a long long break. I had planned on logging my progress so I took lots of photos but never got around to writing up anything about them. I've just started back into the build today and I hope to log my progress from here on in. So here's what I've done to date.
  16. After some prompting from Dr. Per (Nirvana) and a few others on the Forum, I decided I should start a build log. I started my Bluenose kit on June 15th after a lengthy wait for it to be shipped due to the Covid19 pandemic. I built several Revell plastic models including the big Cutty Sark when I was in my teens. I also got the solid hull wooden model of the HMS Bounty up to the rigging stage before real life took over. I never did finish it. So, I recently retired and decided to pick back up on this ship building hobby again. I've really enjoyed working on the Bluenose I. After all these years, I really consider this my first wooden ship model build. I selected the Bluenose because it is not quite a beginners model and I like the sleek lines and all the sails! I decided not to purchase any practicums. I've read a lot of the build logs for Bluenose while I waited for my ship to arrive. I'm mainly using the procedures detailed on the web site of the "Suburban Ship Modeler". I only have a few pictures from my completion of the initial framing stage. There have been a few challenges. For example I broke off the aft piece at bulkhead "O". I know this is not uncommon based on other blogs. I was determined not to have this happen to me. Then I dropped something on the floor and caught the aft piece with the top of my head!! Stupid!! No permanent damage. Just followed the advice of the others before me on how to repair it. It took 20 days and 44 hours to complete the framing up to the installation of the Stern blocks. Here are a couple of pictures of the progress at that time, July 5th. In the process I am following, Suburban Ship Modeler said to begin planking the hull rather then turning the ship over to plank after working on the deck stuff. This made sense to me. I am currently 12 strakes away from completing the planking of the hull. I will provide the latest pictures in my next post. If anyone has advice regarding assigning Tags or other steps on the Forum, please let me know. Thanks, Ed
  17. Okay, call me crazy if you like as this will be number three of models that I will be working on. But as I haven't encountered any problems with this one, I will proceed with the build of the famous Bluenose. This while I wait for parts for the Syren and Solo. I guess this kit doesn't need any introduction or picture of contents. So I will leave that out, however I do have extra material that I will be using later while building her. This extra comes from Syren Model Company, with other word our dear Chuck Passaro. This kit was bought many years ago and the keel and bulkhead plywood is still straight. When I was putting the false keel pieces together it turned out so straight I was amazed. The plywood is very nice and very little sanding is needed to get the bulkheads into each slot. Creating the rabbet was not as hard as I thought. Just being careful at the bow where the rabbet is extreme. I pre-beveled the bulkheads so there will be less sanding once they are glued in place.
  18. I have recently acquired a Billing’s Boats model 576 of the Fishing Vessel Bluenose and I have to say that the instructions certainly do not fill me with confidence about this build. A little history, the boat came to me as a partial build from a fellow who acquired it from the original buyer/builder so I’m the third owner of the boat. After spending some time looking at the boat and studying it’s construction I’m almost regretting ever getting it. What looks ok at a glance becomes a poor start as I studied it. I noticed that some things were broken, parts not meeting up completely and so on. So after a bit of deliberation I have decided to partially disassemble the boat and try to fix them as best as I’m able. I have never built a boat before but I am/was a finish carpenter with what’s left of a decent eye and good hands so I undertook the disassembly with care and I managed to break the glue joints with patience and finesse. There was a spot or two where the deck didn’t touch the bulkhead thus making it seem to have shorter Stanchions than the rest of its mates on the raised aft deck which looked really bad to me. Anyway I currently have the deck removed and the glue cleaned up and I’m ready to get going on it again. The following pictures are how received the boat
  19. Alright, time for ya'll to follow my struggle. The Modelshipways Bluenose will be my first ship model, I got the kit pretty cheap - $90,00ish - on the "Help us Move" sales Modelexpo just had. Huge model for a begginer, but since I live in Brazil, and it takes around two months for anything, really, to get here, I figured that I would get the big ship and double up on research time. So the kit arrived and, naturally, I have some noob questions that I'd like to ask you gentlemen. Dowels, regarding those. None of them are perfectly straight but then there is this one: Would it work to heat it up and straighten it, as you do with planking? Or would the wood eventually warp on me again, and thus I should contact Modelexpo for a replacement? Also, my kit came with two different types of wood for masts and yards - basswood and green vietnamese stuff-, which I'm not too fond of, I'd like to keep it consistent. The basswood, as I understand, isn't the best for masts and yards, due to its softness. So I might be looking into getting some nicer wood for that. As for the green vietnamese stuff. What is it? It feels light, it's fairly small grained, it's pretty consistent, it's kinda green, and it's "from vietnam" labeled: Last question: I have some Mr. Hobby lacquer paints at hand, are there any cons to using those on wood instead of acrylics? Lacquers seem to be often used as clear coats over wood, but better ask, they're much more agressive than acrylics. Afraid to screw up the big expensive ship, I decided to get my first taste of wood modelling with the dories. Overall, I'm pretty happy on how it's been going, even though the by the manual method of building them is hopeless. The jig Modelshipways provides is too fiddly, and there is no way, no way, the thin wood frames would hold the boat to it's proper shape, as per suggested. I won't elaborate further, getting you to propper understand the problems with the kit's dories would take a lot of text and some images, and I don't think you guys are interested in that. Rather, I'll show you what I'm currently doing about it: These are the leftover of the laser cut pieces for the jig that should be used to get the dories to their correct shape. I've cut off the jig's "footprint" from the waste portion of the laser cut sheet provided by the kit, if that makes sense". Now I'm converting those "footprint" pieces into a small POB model, I'm making my own keel and bulkheads. Then, i'll add some filler blocks, make the boat a solid piece of wood, and use it as a template for constructing the dories. I'm currently aligning evrything up and shaping the boat's top. That's it for now. I look forward to learning a lot from you! Cheers!
  20. Hello everyone, This is my first build and I have never built any wood models before. I had a few issues so far and after looking all over the forums, I couldn't find any answers to the issues I had. So I decided, the best thing to do is document it and maybe some of you experts can lend a hand. Here are some of the issues and challenges I had so far. 1- The kit is the newer version of the kit from Artesenia Latina. It only came with a CD which kind of sucked since my new laptop doesn't have a CD drive. I had to borrow someones laptop from the 1800s and transfer the PDFs to a USB stick, then back onto my computer. 2- I tried to line up the pieces 1-15 as straight as I could without a square. Some of them are NOT flush with the top so I had to lift and hold them in place so they'd be flush with the false keel. See below. I ended up putting a piece of wood underneath it to make it fit with the rest. 3- Deck planking went well but the instructions said to dye the walnut pieces on the edge of the deck. It didn't specify a color. I used minwax cherry stain. Now, the instructions should really ell you to dye these pieces before you glue them because, even though I taped off the outside, some stain went under the tape and stained the white planks. I am wondering if I should strip and re-stain. I used a pencil to score both sides of the planks to give it the caulking look. I used only a few pins instead of 30-40 since I realized the AC glue I have is insanely strong and literally dries the moment i put two pieces together. This is good but also bad because you can't shift once you make contact. I'm going back and forth using the AC glue and wood glue depending on the risk factor. Finished sanded deck below. Everything going great so far. And than, the dye/stain screwed up the deck. Theres tiny blotches of cherry stain on the pine deck. See below 4- This was so far the biggest mistake I made, I used AC glue to glue the top part after painting the inside ivory. Unfortunately, it lifted up the ivory paint and spread it on to the stained walnut pieces. After all the work getting the planks to fit so tight, the finish is kind of amateur looking but than again, I am an amateur. Just my OCD is not letting it go. Now, onto planking the hull. The instructions are a bit weird. It says the bottom of the keel should be 3mm at the end when it's planked which would mean I have to sand it down to half the thickness which is a bit scary to me. Any advice? I started from the top and I am working my way to the bottom. I am not sure how I'm supposed to achieve a smooth curve all the way to the bottom since the bottom of the keel is currently square. Also I noticed, instructions said once I put the 2 planks past bulwark 12, it would be flush with the big side pieces. Well, it wasn't. I have a triangular hole. I'm hoping wood fill will fix it or should i cut a small piece of wood to fill the hole?
  21. This is the beginning of my build log for the Bluenose II. A previous build of the original Bluenose was my first successful wooden boat completion. I started this Bluenose II a long time ago (its an older version of the kit), but stopped shortly after installing the bulkheads on the keel. I have other models in my queue and I will pick one to build alongside this one, but I thought it would be appropriate to finish what I had started. I have scanned all the build logs for the Bluenose II on this site and am a little wary of the small percentage of completed builds but I'll give it a go. This kit, although smaller than the Bluenose kit I built seems to be a lot more detailed. I may even attempt to mount sails on this one. I downloaded a copy of the build instructions for the newer versions of the kit to supplement the build (color pictures and pre-made sails no less). I will be using the build logs by Penfold, Heronguy, Bulwark, and Bertu as guides as well as John Earl's on line guide, Eisnor's scratch build practicum, and Mastini's book as a guide. Unfortunately I had already missed a few steps when I put the keel and bulkheads together, so I'll be picking up at a later stage having missed such items a checking the symmetry of the bulkheads, etc. I added the mast supports, nailed and glued on the false decks and have started fairing the hull. I didn't notice any warping of the keel that was apparent in some of the later versions of the kit as noted by other peoples build logs. Wish me luck.
  22. Today I started on my first ship build "The Bluenose I", I recieved the kit on September 10 2015. It is the kit from Model-Expo the 1/64 scale MS2030. I am excited to get started... I started with putting the keel together, there are three pieces that make up the keel with this kit that needs to be assembled and set over night for the glue to cure, then putting a bearding line and a rabbit line that needs trimming/cutting.. as of now the keel is sitting glued together till tomorrow, I'll try to keep up with photos as I build her. I would appreciate any and all comments as I keep up with building, so please give me all helpful tips and comments.
  23. Here's my new build model shipways Bluenose already seeing issue with the keel parts don't meet at the bottom so I'm not sure what to do there I will upload picture of it
  24. Welcome back everyone! I will get this restarted in a couple of days when I am back in town. In the meantime please PM me if you have a copy of any part of my log from before. The name change is due to my fat fingers when trying to register. Thanks to Chucks fine work, I was able to retrieve my old name! Now I can move forward without getting confused about who I am! There are three main goals in doing a build log for me. 1) it helps keep me motivated from time to time when the doldrums strike. 2) It is a great place to bounce ideas off people and get some great advice. I may not always go that way, but I consider everything very carefully even when I don't follow it. 3) It is my hope that sharing my issues and pitfalls may help someone else along the way. So here goes: Bluenose log 2.0 Thanks, Bob
  25. I am in the process of picking up where I left off 45+ years ago. I am new to this forum and ship building in general. My wife got me a Christmas gift early in our marriage. Assembled the hull w planking and the moves and career put everything on hold. So far I’m planning by reviewing info I can find online, creating a workplace, deciding what tools, I need and my next step. I’m trying to find out about what fittings I need and where to get them as none were included in kit back then. And that scale (1:75) is no longer made by Billings. I’ve worked through some builds on this forum and will continue till I feel ready. Any advice greatly appreciated. Gary D
×
×
  • Create New...