Jump to content

bryanc

Members
  • Posts

    218
  • Joined

  • Last visited

About bryanc

  • Birthday July 12

Profile Information

  • Gender
    Male
  • Location
    Buxton, UK

Recent Profile Visitors

1,006 profile views
  1. Proxxon DB250 with three jaw chuck No longer required as I have gone to the dark side (plastic kits!), in excellent working order, complete in the box it came in with manual etc. The 3 jaw chuck was purchased later (about £30.00) and makes life so much easier. One of the two chuck keys was lost early on, but anything will serve, I used a small screwdriver. I haven't actually costed the postal price, as I'm lazy (it'll be about a tenner - in the UK) and hoping the purchaser might want to pick it up (UK - SK17 6DU). On Amazon currently it costs £136.00 and the chuck £41.00. Both yours for £90.00 plus postage How can you not want it! Bryan
  2. I completely forgot to mention I have done another video presentation of this model, c/w the sounds of crashing waves, seagulls and ominous wood creaks. My children say there should be a piratical voice going "Arghhhh", but I don't think they are taking this seriously enough ;-) The video is here
  3. Just to show I’ve not completely dropped off the radar I’m tentatively showing what I’ve been up to whilst desperately searching for a new large scale cross-section kit; the Mantua French Carronade - here I've established there are no further large scale "cross section" or "diorama" kits currently available, or if there are I can't find any. Which really only leaves the "scratch build" option. I'm prepared to have a go, but am concerned one really needs to expensively tool up for such an enterprise, which isn't easily done. As an introduction I am tentatively looking at NRGs "Battle Station" - yes, yet another battle station, but scratch built, and which should be a more gentle introduction to scratch building. Plus there are a few build logs of it on here, including the excellent NRG Battlestation by Doc Blake here
  4. For Christmas my children bought me two of the Mantua “Battle Station” carronade kits (both the French and English versions thereof). They are to a scale of 1:17, so more than fulfil my desire for large scale kits. However it’s difficult to take them as serious “kits”, so I won’t be doing any build logs, I didn’t take any photos whilst constructing the first (here presented, the French one), but think I might do whilst doing the English one, just in case. However it is worth pointing out that the kits are extremely well produced with the parts as good as any I have come across in any ship kit. Even the manual is well presented, although one gets the feeling it’s not taking itself too seriously as some required dimensions are not listed and one has to make several “best guesses”. I think the fact the very first item one builds, the decking, gives the user the (completely wrong) impression this kit is not going to be too demanding. The deck comes complete as one piece, with planking joints and treenails already etched into the surface. In a sneering way I found this completely off-putting, but as the kit developed, I quickly realised it wasn’t a complete walk in the park, but some elements were in fact a tad demanding. There is some scope for bashing, but I limited myself to two additional cannon "tools" ; the wormer and rammer. The "sponger" was part of the kit. I should also point out the original cannon was a superb brass one - of considerable weight! However I demand realism (to a point), so the brass had to be rendered gunmetal. The finished model is actually quite pleasing, and well worth a place amongst the more finished, more self-important, model ships previously built.
  5. Videos I should just mention I did a couple of videos, primarily to show the wonderful flickering lantern light! Sadly it fails miserably to do so, obviously flickering lantern light is best viewed in the dark, but videoing in such lighting conditions is near impossible, at least with the primitive kit I've got. They do give a vague impression though. However I've gone on to post them both on YouTube. They are quiet novel, and even quite atmospheric, but do note they are not intended to show my modelling prowess, which would be very difficult to do! You can view them following the links below. https://youtu.be/4WlGBJXbNUE https://youtu.be/Mgi9B5m1JPc Thanks
  6. Finished! Well this last post took infinitely longer to appear than intended, but to be honest I’ve deliberately dawdled over the last couple of weeks, partly because I’ve enjoyed the build so much and was reluctant to admit closure, but mostly because I have no new kit to move onto! Well, that’s not strictly true, I have the Occre Santisima Trinidad Cross Section waiting in the wings, but I fear it will be waiting for some time, as I’ve little or no enthusiasm for beginning another tiny scale kit (1:90!) after the pleasures of working with a wonderful 1:23 scale. It’s the greater detail I so love as I’ve said before. And it’s adding, and embellishing, that detail that has made this build so enjoyable – frustrating at times of course, but that’s part of the enjoyment! But finding another, similar kit is proving near impossible, and believe me I’ve scoured the Internet! One option is a scratch build, but I genuinely doubt I have the skill set required, at least not yet, and anyway haven’t a clue where to start; finding plans, working out the methodology etc. etc.! But, onto the build details of this one; First to explain the “cutway” view mentioned cryptically earlier on. The original kit design is simply to leave the upper deck planking incomplete, so the lower deck is completely visible; fair enough, when the majority of the painstaking detail of the kit is on that lower deck. However I wasn’t comfortable with it, it just strikes me as unreal, so I’ve compromised, and laid the upper deck planking in a way that left “cutout” views of the deck below. (Note this is not an original idea, an Ian Lawrence – ianlawrencemodels.com, did the same thing). Another reason for doing this was my coup de grace; a “real” flickering lantern illuminating the lower deck! To disguise the installation of this required more timbers above it than the plans allowed for. I had the idea of doing this almost as soon as I saw the kit, it’s almost begging for it. The completed model now even has a push switch, hidden beneath the upper deck grating! Again I knew I wanted all this, but was clueless on how to achieve it, and do have to acknowledge the invaluable help offered to me by Jennifer Smith of jsminiatures.co.uk who provided me with exactly what was required. I’m hoping to be able to post some videos showing this in all its flickering glory – it’s really impressive – but I’m not sure if the forum can facilitate this. I’ll find a way if not. I have however posted some photos which give an idea. The cannon were already assembled and rigged, it was just a matter of fitting them in place, awkward, but that’s to be expected. Then all the deck furnishings, barrels, sacks etc. (Those barrels and buckets! Assembled stave by stave, they took weeks in themselves). The table fell out during one tricky fitting operation, and I took the opportunity of embellishing it further before replacing it. It now has plates on it (square of course) and little mugs! I think the last thing I worked on was the rolled up hammocks placed inside the netting on the upper deck. Only a few hammocks were catered for in the plans, but I decided to fill the entire length of the deck netting with them, as would have been the case in reality. The netting incidentally proved very tricky, and I’m afraid it does look a little tatty in places. It ended up being made of muslin cloth after I spoilt the original supplied netting, and I’m not sure the muslin was the right material. But there she is; imperfect, and a tad tatty in places but in an odd way, all the more authentic looking for all that. Bryan
  7. Thanks paul, I had already done most of what you suggest, apart from the fake coils. Now that is one to remember!
  8. Thanks guys. Praise indeed Paul re. the ladder, considering it was your work I pinched the idea from! Again the larger scale make things like the ladder that bit easier, but I am pleased with it. I take your point(s) guys regarding the hammocks. Some ideas to bear in mind for other projects. I might just get away with it (hammocks not fouling the tools too much) but we'll see. Currently struggling rigging the cannon - especially on the "inside"! Thanks again. (BTW has anyone come across any similar large scale kits? I'm really loath to move back down to a much higher (lower?) scale again! There's a 1:90 waiting in the wings which I'm frankly not relishing. I may have to investigate building from scratch, but fear I'm just not skilled enough).
  9. Thanks Bob, yes those hammocks really did cause some grief, but it was worth it, they add a lot. Sadly I now realise why the outer set of hammocks were folded; I assume they will foul the cannon tools when they are fitted. I should have realised. If I can get away with it I'll leave them, but I suspect they will have to be folded. I didn't realise that's why there were the few discrepancies between the plans and the manual. That would explain it. As you say though, they could all be worked around.
  10. Thanks Keith, now that really is the best compliment anyone could make! I'm envious you have had the opportunity to walk through the Victory for real, something I hope to do one day!
  11. I just thought I'd better do a quick update as things are nearing completion! This is likely to be the penultimate post on this build log. Added the stairwell and stanchions to suit (all bashed as they don't appear on the original build). I think I've made them a tad too large a scale, and, as mentioned before, in retrospect I would have positioned them on the opposite side of the model, and conceivably facing down the length of the build, but they serve the intended purpose well; adding a little more interest. New from last time are the fittings on the inner hull; table and benches, porthole lid inner rigging, and shelving etc. The latter did have additional fittings (to stop things falling off as the ship hit heavy swells), but they looked ungainly so they went. The last additions are the hammocks and the shot racks (there is an additional rack still to be added). The hammocks were really awkward to assemble - talk about sticky fingers - and in my case extreme sniffles as I was obliged to use superglue! In the original plan, its intended two hammocks were to be left "open" whilst two tied up. I decided they looked best all hanging loose. Yet to do; fit the cannon, already built and rigged, fabricate and position all the cannon "tools", and fabricate all the barrels and sundry deck fittings (which are probably going to tax me as much as anything has!). Finally decide exactly what I'm going to do with the upper deck planking. For reasons I'll explain later, I tend to think I'll create a sort of "cutaway view". Not the best solution perhaps, but one forced on me! (Sorry to be so cryptic, all will be explained). One thing has become obvious; what a pleasure it is to work with a kit which is complete with good instructions - OK so the plans contradict the manual sometimes, but that's still infinitely better than no instructions at all, as with my last build. Bryan
  12. Another update as things are proceeding apace, and without any major trauma (there I go tempting providence again!). I’m relatively pleased the fitting of the gun port lids didn’t cause the usual head banging on table that they usually do. Probably because of the larger scale involved, things proceeded relatively calmly and according to plan. I’m admittedly beginning to regret my decision regarding the ladder, but only because I elected to place it on the wrong side. As it is whichever way it faces it’s going to (theoretically) foul the brace. But that’s only a minor detail really. I also shouldn’t have used the thicker black thread for the port lid rigging, and I don’t really know why I did. I even had to fashion new pulley blocks to accommodate it! I think I perhaps wanted to make sure it could be seen easily, given the trouble it took to do it! The cannon are complete but not yet in place as there are lots of small “incidentals” to create and put in place. The table and benches are now under construction, and of course sooner or later I'm going to have to decide just what I do regarding the upper deck planking. Obviously the plan proper is for only a few more planks than I have already completed, to "reveal" the deck beneath. But in reality of course it would be completely planked over. I can sense a compromise approaching... Bryan
  13. Yes your right, a sacrifice has to be made to those gods once in awhile. There's no chance I can get under my freezer so the gods have possessed them! I'm only reassured others make the same occasional blunders as me :-)
  14. Thanks Paul, and yes, you're about right in your working out of my lack of planking. Your advice is welcome as ever. Regarding the cannon keys, I'm afraid I had a laughable but very unfortunate accident; I was about to blacken all the brass parts and after soaking them in thinner to clean them, as I was rinsing them and lifting the shallow plastic bowl I was using to contain them, clipped it on the edge of the sink and all the brass bits went all over my kitchen floor! Cannonballs rolling everywhere! I've retrieved most of the parts; sadly a lot of the cannon balls have gone, and there was no chance of me ever finding the tiny keys. I'm afraid the cannon hinge fittings have had to be bodged. The language was creative though!
×
×
  • Create New...