trippwj
-
Posts
3,131 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by trippwj
-
Farawayman - You make some very good points in your posts (I also apologize for going the humor side above). I think that there may be some approach that would make sense - I am just not familiar enough with the subject to know what it is. I tend to agree with Chuck - when copyrighted material is posted with out appropriate citation or permission, it needs to be pulled. Enforcing the onward distribution of content, however, is nearly impossible for a site. Note that Google and Bing are frequently shown as online here as illustrative of the challenge. While, as an individual, I can add a copyright notation to my pictures, posts and so on, knowing if any of them are actually being used by anyone else, whether for profit or whatever, is likely to be more time consuming to monitor than it is worth for me (plus, if they find any of my model efforts worth claiming, then more power to them - I ain't that good!). I would suggest a look at the basic members agreement as a starting point, perhaps adding that posting of copyrighted materials without permission or in violation of the fair use doctrines will result in removal of the materials immediately (or something along those lines). Back to looking at my model in progress across the room whilst doing my paid job (which has nothing to do with ships, wood, glue, or sails) - and thank you for bringing this topic up for discussion! -
Hatch covers.
trippwj replied to mikeaidanh's topic in Discussion for a Ship's Deck Furniture, Guns, boats and other Fittings
I think that, for loading, the individual hatch would be removed and stacked to the side. It seems reasonable that some form of lift (probably not the right term) would be rigged from the mast forward of the hatch to lift and lower the barrels, crates and sundries into the hold. I need to do a bit of digging to see what the layout on the Surprise was to see if that makes sense for loading barrels into the magazine.See the plate from Steel's The Elements and Practice of Rigging And Seamanship, 1794 below for an example. -
You Uncle Pauly must work in the same field as my Uncle Guido...Guido is actually a kneecap specialist
- 20 replies
-
- 4
-
-
- IPR
- right of use
- (and 1 more)
-
Question about 17th century spritsail topmast
trippwj replied to Ilhan Gokcay's topic in Masting, rigging and sails
I don't think there were any that had both - Anderson was commenting on the fact that during the 50 year or so period, there were some ships with a spritsail topmast and some with a jib and stay sail. No record of any single vessel that actually had both rigged. It is possible that a ship orginally rigged with a sprit sail top mast could have been modified to remove the topmast and add a jib boom and the staysail, but not likely it happened much. I think you would be very safe staying with only one or the other (Spritsail topmast or jib & stay sail). -
Hatch covers.
trippwj replied to mikeaidanh's topic in Discussion for a Ship's Deck Furniture, Guns, boats and other Fittings
Mike - the answer may depend in large part on the vessel. Are you looking at a merchant ship or a naval ship, and what era? -
Pete - you may want to contact Model Expo (maker of the Model Shipways line of models) and see if they can provide you with a better set of instructions. They tend to be very responsive and exhibit good customer service. They have several sizes of the kit listed when you search for Lifeboat. Good luck!
-
She is looking very good, Sjors - you have some great skills! Enjoying the build.
-
Very nice work, downeaster. We used to live in Orrington - still have family there.
-
I had been trying to figure out how best to copper my rudder. I tried a couple of copper tapes and plates but couldn't get a good contoured fit. After trying several copper paints I came across the Testor's Copper #1155. Voila! Also continuing work on the main boom. thanks to a suggestion from Adam (skerryamp) I found some teensie weensie timey whimey glass beads at my local Hobby Lobby store. These are labeled as 11/0 seed beads and measure 2.2mm diameter. Still a tad larger than I would prefer, but they will do!
-
On these chain pumps, the volume/mass removed per minute is more a factor of the capability to turn the crank at a high enough rate. Larger diameter pipe would mean more water in each deisk, more mass/weight to be lifted. At some point, a critical relationship between strength of materials, crank speed and crew strength gets crossed. I know in firefighting, we use 4 inch diameter hose from the hydrant to the pumper. At hydrant pressure we get between 750 and 1250 Gallons Per Minute delivered to the pump.
-
Looks like a great way to keep going during the move!
-
fantastic job on the lobster traps! What are you contemplating for hardware on them? Most would have minimal metal (rusts too easily and ruins the wood). perhaps a cobblestone or old chunk of granite in the house for a weight? Lobsters on water skies....interesting visual!
-
Thanks, Adam - hope to get at least a small update posted today. Had been pondering how best to handle coppering the rudder, you may recall. Using the tape was not viable - just didn't look right. Tried the plates but same problem. Also, an update on Cricket's cosntruction assistance (Cricket is my 5 year old apprentice). Tune in later today for what seems to have worked for me for coppering the rudder and assembly by Cricket!
-
Lookin' good, Adam - good catch there, but then again, who really needs a tiller anyway????
-
Sarah - will wait for others on the first 3 (I made some guesses on mine), but as to #4 (that speaker looking thing) - that is the shaft for the paddlewheels. What looks like a box is actually bushings - if you look at the end view you can see it as just a shaft between the house and the paddle box.
-
Hi there, Sarah. Yep - very basic info on the deckplans so a lot of room for individuality. I got stuck for a bit trying to figure out what the coaling rings are. Found out (via ModelShipBuilder forum) they are essentially like a manhole cover where coal was loaded. Based on a bunch of digging etc, the ones on the HL would be about 18 inches diameter, nearly flush with the deck. See the build log by Clare here for how he did them. http://www.modelshipbuilder.com/e107_plugins/forum/forum_viewtopic.php?6849
-
I gave in to temptation...Emma C. Berry is being prepped for shipment as we speak!
-
Solder brass rod for deadeye
trippwj replied to cog's topic in Metal Work, Soldering and Metal Fittings
Carl - probably better off silver soldering with a torch (based on what I have been advised in response to a very similar question). Also see this thread for a neat way of doing this. http://modelshipworld.com/index.php?/topic/487-chain-plates/ -
Question about 17th century spritsail topmast
trippwj replied to Ilhan Gokcay's topic in Masting, rigging and sails
That would be an accurate statement. -
Dang, Popeye!! I think I missed this one before...settling in for the ride, as they say!
-
She's looking very sharp!
-
Good morning, crew. Need some recommendations, please. I am nearing completion (well, at the rate I am going, it may be a few more months) on my current build. I have a partial build of the Corel Revenue Cutter Ranger sitting on build slip (I have planked the deck, procrastinating on planking the hull). BUT, I just saw an offer on Model Expo that is almost too good to pass up - Model Shipways Emma C. Berry at $90 off the regular price... 1:32 scale ship model kit kit is a true plank-on-frame model, using beech and basswood for strips and beams. same number of true-to scale frames as the original. GREAT price right now...do I buy it and put it on the shelf as motivation to get the other two done?????
-
A very impressive bowsprit it is, Sjors. Nice looking ship - thanks for putting it all back on line for us!
-
Based on what I saw in Zu Mondfeld, they were actually leather disks. The pipe (tube) was almost a "U" shape but there was an opening in the bend at the bottom with openings in the tubes where the disks would pick up the water - apparently they never were out of the tubes. The return (down) tube was larger in diameter (reduced friction would be my guess) than the up (lift) tube (needed to be a tight fit to move the water up). Supposedly, a good pump and crew could move about a ton of water per minute from the ship. Here is a snapshot of the diagram from Zu Mondfeld.
-
For a good reference on 17th century rigging, you may want to take a look at The Rigging of Ships in the days of the Spritsail Topmast, 1600-1720 by R.C. Anderson. Very nice reference that covers a variety of European rigging.
Our Emblem ®
