Jump to content
MSW Spring Donation Drive

leginseel

Members
 View Profile  See their activity

  • Posts

    177

  • Joined

  • Last visited

 Content Type 

Everything posted by leginseel

  1. leginseel
    Ive just realised that my photos are in the wrong plane again. Apologies I need to take Javajohns advice but after four months away everything has fallen out on the pillow!!
  2. leginseel
    I'm now back in Turkey with my Victory after 4 months in UK. I started to look at the first planking and decided that the bow need some extra support, so I crafted two filler pieces out of limewood. I've added half a dozen planks straight off and I now need to shape the next set as I go towards the keel. As there is so many cannon trucks to make I've decided to make a start by fashioning a small jig which seems to be working ok. My last photo shows the lower and middle deck cannons mounted but not secured. I decided to do this now as I thought it may get a little unwieldy later down the line.
  3. leginseel
    I’m reading ahead as I’ve not got this far with my build yet, but do you think soaking the walnut before cutting might help?
  4. leginseel
    Robert, I’m only on my first planking but find myself time and time again coming back to your wonderful log for reference. I cannot hope to match your skill and patience but I thank you for such an informative build, I have it constantly open near my bench!!
  5. leginseel
    Genius idea with the jig. I have been scratching my head on how to achieve the correct cannon fitting angle. Thank you I will borrow this if I may.
  6. leginseel
    I knew that there would be a reasonable explanation, thank you javajon, I'm a bit of a dinosaur when it comes to stuff like that. I'm due to fly to UK on Thursday having been in Turkey for two years so this will be my last post for 3 to 4 months. I'll miss my Victory but I'll get to play with the grandkids instead. Take care everyone and see you in 2022.
  7. leginseel
    Try as I might I cannot upload these images in the right profile, so please accept my apologies for the state of them. But if there is a genius out there who knows what I've done wrong I'd be very pleased to hear from you. This is my current progress with the build and will now go into a 3 month break as Im flying back to UK next week. Any comments or criticisms greatly appreciated.
  8. leginseel
    Build started September 2021. Early days log and photographs to follow
  9. leginseel
    I have just started on the same model. Your build log is excellent and has already helped me and given some positive ideas on how to solve a few issues that I was concerned about. Brilliant well done and I will definitely be using you log as a tutorial, thank you.
  10. leginseel
    I read further on before I did this and decided to paint the sides black on mine and also install a floor to the lower gun deck ports so that later on when lining I won’t drop stuff into the hull.
  11. leginseel
    Hi Guys, thank you so much for all your kind remarks. My wife is getting along nicely thank you. She has had M.S. for the past 35 years and she is undergoing some new treatment which will not cure it but we are hoping that it will stop it from getting much worse. As a consequence I'm not taking on any new big projects for the time being. I had planned to do a Victory but that is very much on the back burner now. Consequently I'm trying my hand at some Dioramas, which keep me occupied and don't take up too much time. One or two of you have been asking for photos with apologies to the administrators but these will be the last posts by me on here, so here goes. The last ones are still work in progress but the others are complete. Thank you guys for all your support.
  12. leginseel
    Thank you you're very kind.
  13. leginseel
    Hi guys I had a bit of a nightmare as I've had to spend so much time looking after my wife and travelling back and forward to various hospitals so I haven't been posting in my log as I should but I have finally completed my Bounty. Here are my final photos Please forgive the lack of detailed progress pictures. All I have to do now is make a base and a glass or perspex cover. Thank you all for following my build, i've thoroughly enjoyed doing it over the past two and half years. I have to say that the encouragement and advice gained from this site has been invaluable, thank you.
  14. leginseel
    Stunning work Mustafa, well done on completion. I look forward to your next project.
  15. leginseel
    Hi Guys, that was a long break and I've returned refreshed. I've managed to complete all the ratlines and most of the standing rigging but I've been sidetracked by building WW2 dioramas which I'm greatly enjoying. So I have two benches working at the same time . One with the Bounty and the other dioramas. Anyway here is where I'm at at the moment. I'm clearly out of practice at inserting photos and they are in the wrong order, but I'm sure that you get the picture.
  16. leginseel
    Apologies to those of you that follow my progress but I'm having a break at the moment. Having tried to do my ratlines in 30+degrees with sweat running down my face and not really enjoying it, I've decided to wait until the weather cools down. Have a great summer to you all.
  17. leginseel
    Hi Vinnie, just returned home after a month in UK and now catching up. Great work and so quick!! You must spend a lot of time on it but it is clearly paying off, nice one.
  18. leginseel
    Thanks Steve, good to hear from you. Progress is slow but I'm getting there. Doing ratlines at the moment and have already started again twice!! I keep telling myself I'm learning, albeit the hard way.
  19. leginseel
    OMG you were right OrLiN !! The top shrouds presented me with the biggest headache but I've got round it I think with a little bit of cheating (apologies to the purists). I decided to pin the shrouds in the holes with brass pins, wrap them with CA underneath and the cut them off. Seems to have worked thus far, here are the photos - I'll blacken off the pin tops when they are all done. I've progressed with the main mast shrouds and deadeyes and the air around here has been decidedly 'blue' I can tell you. However, I've learnt such a lot and as they say next time I hope they will look better - I took this photo as it looked the best then realised the third one from the left was wrongly tied up - Doh!! It's now been corrected. When I look at these close-ups I just want to tear it down and start again, but I'm taking the pragmatic view that I can only get better and hopefully I'll look on this with a smile in a few years time. Thank you for all the likes and comments
  20. leginseel
    Beautiful work as ever Vinnie and welcome to your new crew member. Like you I brush painted my hull and after I looked at a number of other logs on here and the quality of airbrushed paint looked far superior. So I persuaded my son to buy me an airbrush compressor for my 60th birthday and it's wonderful. It took a little practice but the results are great. Also I use it to give the whole model an acrylic varnish which protects it and doesn't affect the colour. It wasn't expensive - around £80 I think and then you'll need a couple of airbrushes plus cleaning kit. I would highly recommend it and if you need anymore info let me know.
  21. leginseel
    Hi Vic, thanks for the comments and I've tried to find your log but can't find it for some reason. I'm with you totally over the Constructo rigging instructions as they are non existent and for them to say just follow the drawing is a complete cop out. Thank goodness for sites like this and YouTube. Hope all goes well with your build and I look forward to viewing your log.
  22. leginseel
    Thanks for the comment OrLiN but I thought that trying to do as much of the rigging off the ship as possible was normal practice. Either way it seems much easier at the moment but perhaps I'll come up against a big problem later - we'll see.
  23. leginseel
    Thank you for your kind comment. The yards took a bit of time but I cut all the pieces and did each step as a production line. I'm lucky to have a small lathe which meant that the tapering of the yards from the provided dowels was relatively easy. The actual rigging and knot tying when you've big sausage fingers like mine is pretty tricky but rewarding.
  24. leginseel
    Hi Guys I've just re read my post above and realize that I've mentioned the shroud loops over the Mizzen Mast and didn't post a photo, so here goes You see what I mean, the loop is awful and those blocks are equally embarrassing so I changed both You'll see here the difference. I left the final seizing until it's placed in position. These blocks are much neater. I then re looked at the deadeye rigging, see the photos in the previous post. I wasn't happy with them so I re did them and after three attempts got the following result I know that the eyes aren't in alignment and the final tying off leaves much to be improved upon, but I'm happier with the result than before and I've learnt so much in the process, which is what this is all about in my book.
  25. leginseel
    Lovely work Vinnie, that Bluff Bow looks fantastic and the deck totally realistic, nice one.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...