Jump to content

KORTES

Members
  • Content Count

    185
  • Joined

  • Last visited

Everything posted by KORTES

  1. Greetings my honorable colleagues. Asking the admittance to “the Dutch club”🙂 I have found the drawing in the internet, scale 1:30. I’m planning on working with the pear tree and black hornbeam. I would be very grateful for the advices and constructive critics. For the moment the model has a certain level of readiness. I will download the report in the chronological order. I also wanted to say that English is not my native language and I would have to use the translator sometimes. Due to this the terminology and information could be mistranslated. In advance, my sincere apologies if this may happen. Respectfully yours.
  2. The next step. Inserting the block into the shell of the block. Marking and drilling a hole for the “axis of a sheave”. After that - the shell is taken off and the profile of the shell is being formed, using the same mini-drill and broaching file. The next step - making the axis of the sheaves from the wire 0,8mm, this is easy. After that blackening of the shell of the block and assembling. I ve done it like that. I hope my explanation is comprehensible. If there are questions I’d be glad to help.
  3. After that the shell of the block is being soldered to the end of the hook. I used the the clamp as seen above. After the soldering, the extending points of the ends are cut off with broaching file and mini-drill. On this stage I also made the final shape of the hook using the same equipment. On some blocks, apart from the hook it was necessary to solder “half-circle”. It is also bent separately and soldered to the end of the block.
  4. The making. Unfortunately, I didn't document all the steps, so i’ll try to explain in words. I made blocks of the required form. Cut the stripes of brass of the required width. Adjust the shell of a block individually, using each block as a pattern, which guarantees push fit after soldering. Hooks are bent separately out of the wire 1,0 mm. After the bending, we cut the end with a thin saw used for metal works. and make the shape on which will be soldered the ends of the shell of the block.
  5. Greetings, my dear colleagues. Thank you very much for the evaluation of my work. I’ll try to answer the questions about the making of blocks. I used pear tree , brass wire 0,8 and 1,0 mm. Thickness of brass - 0,3 mm. I would like to point out that the technology is based on the hand- making of each block, because each block has a different shape and size. Since there are not many blocks on the yacht, I didn't make up any mechanical method of production. Blocks were made ith the immitation of the sheaves. I know from experience that on the blocks that are equipped with cable, block sheaves are not seen.
  6. BLOCKS. By trial and error, I made a certain number of blocks, I think I would have enough for a complete set of rigging. The most difficult part for me turned out to be metal shell of a block. In the end, I made them using 1.0 mm wire with further refinement.
  7. Thank you very much, my dear colleagues for Your interesting messages. I think it's related to the length of the giek, and, I think, the tribute to tradition has also played its part My best regards.
  8. Dear Michael, It's with great interest and admiration that i studied Your report of assembling. Your outstanding culture of work performance and virtuoso mastery of metal processing equipment commands deep respect. I wish You strong health and inspiration in Your future work. My best regards, Alexander.
  9. I would like to ask, please, if anybody could tell me why flagpole has such form? Is this a tribute to tradition or is there any other reason? My best regards.
  10. Dear Keith Black, Thank you very much for such a high evaluation of my work.
  11. My greetings Griphos,I'm very glad that my experience and some of the technologies seem interesting to You. Regarding the work wwith metal, honorable Wefalck is right, the skills come with experience. I haven't read any literature on this subject. Nowadays, in the internet era we can learn the theoretical part from many resources, and the experience will be gained only with practice, we dont have to be afraid of difficult work and be prepared that probably some components would have to be redone several times - it's the only way to gain experience. And one more point, a big equipment stock makes the work considerably easier, but doesn't guarantee high-quality result. The more advanced the instrument is - the more practice it requires. Whereas the absence of equipment stock requires non-standard solutions in the working process. My best regards.
  12. Over the past period, I attached the predator, installed a flagpole. So far everything is removable, so that there is no difficulty in installing the rigging.
  13. As always, outstanding. Valeriy, your work is always truly admirable. My best regards, Alexander.
  14. Dear Michael, It's a great pleasure to hear it from You. My best regards.
  15. Dear Dave, I'm very touched by Your words and such a high evaluation of my skills. The work of Your grandfather is a real masterpiece, work of the Master, I would his hand with a profound respect. To my mind, its the best thing, when the works of our ancestors live in our homes, delight our eyes and the eyes of our guests, I think it's the best reward and the best remembrance that any Master would wish for. In my turn I have to say that my father was an example for me, who had built a house, that i grew up in, with his own hands, mastered a lot of skills and professions, all of his works had an outstandingly high quality, and has left many paintings which decorate my home and homes of my relatives. I think if we come in our skills just a bit closer to what our ancestors could do, it would be good. My best regards.
  16. I have found some more photos of this figurine in the internet, taken from different angles, which i used as my guide, and, of course, the photos of the real hawks.
  17. The bird, as all the other decoration, was cut from the pear tree. Unfortunately, it's extremely difficult to find a boxtree in the region whre I live. I will be using the second version. The first one is a bit bigger than it has to be.
  18. Greetings, my dear colleagues and friends. Thank you very much for such a high evaluation of my work. I'll try to answer the questions.
  19. After receiving some critics from my friends – the second and ,probably, the last version.
  20. Fitting. Afterwards, putting some paint in certain places and coating with oil.
  21. Final decoration element. Carving, I tried to make a hawk.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to provide support to our members in their efforts to raise the quality of their model shipcraft.

The Nautical Research Guild puts on ship modeling seminars, yearly conferences, and juried competitions. We publish books on ship modeling techniques as well as our world-renowned quarterly magazine, The Nautical Research Journal, whose pages are full of articles by master ship modelers who show you how they build those exquisite details on their models, and by maritime historians who show you what details to build.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×