Jump to content

Ulises Victoria

Members
  • Content Count

    1,887
  • Joined

  • Last visited

Everything posted by Ulises Victoria

  1. Hello all. Couldn't wait and I'm posting these photos with the sole purpose of starting my Royal Louis build log. I'm under the impression this will be a real challenge. Box and contents shown. I know before hand I won't be using some of the stuff in this kit. Like those metal boats: Plan to purchase wooden kits for those parts. Blocks: I'm planning to purchase blocks from an external source. Rigging thread: I will make my own. Too many metal parts. Still don't know which I will use or won't. Will decide in due time. Actual build photos will come later. All you see in the photos is all the room I have to build. That is a blanket closet. I dream of a really big and spacious shop.
  2. Small update Jan 16 2019 Working on the Spars. Here they are, painted in black and displayed over their respective place on the drawing. Detailing will follow. Hope its seen in the photos. Here I add the loop wires where the stirrups will run through. A very light touch of aluminum color applied with dry brush, to make look those part "metallic" And some "rust" Finally a light dry brush with a lighter color to make them look more "woody" Not sure if these effects are captured by the camera, but anyway, the thing with "weathering" is that it should be very subtle. I am very happy because finally I sat down at my computer and organized all of my build's photos. I have 853 photos which were scattered through 2 computers. Now they are properly organized. Bye, best regards and thanks for coming!!!
  3. Update as of Jan 11 2019 and a couple of funny events. I had to re-do the spacing in the main mast channels also, as it was just like the ones in the fore: some cannons were placed exactly behind of a deadeye. Here I am marking the wood with a pattern I made upon the plans. Checking the correct alignment OK. I'm happy now! Making a mirror piece for the other side. This is the main lower yard in process. You can appreciate its size! It is the largest yard in the ship. Tapering in my lathe the mizzen stay yard (I think that's what it's called) I had to drill a 3mm hole in this part to replace with a dowel a broken pin in the end of the piece; as expected (I'm a firm believer in Murphy's Law) the part cup-like shape exploded! so an emergency repair had to be done Here is the end result, anyway. The other end Here is the funny part. Plans showed a 9mm dowel to make this part. It felt strange that the tapering had to be down to 3mm at the ends. So after I finished the yard, and was celebrating that finally all the yard arms were done, I went to check the plans again. And I realized that this... ... was not a 9, but a 6... (Are you done laughing now?) So I had two options: make all the yard again, or back to the lathe to thin it to the proper size. I opted for the second and everything is correct now. Here is a general view of all the yard arms in its place on the plans. They will be painted black. Now another funny bit. Some days ago I went to review all the printed material I have of my ship. Plans, drawings, instructions, etc. And saw that one sheet with pages 5 and 6 was missing. This was a critical paper for the rigging stage. I went through all my papers, drawers and boxes and couldn't find the sheet. I started thinking about asking members who had those plans and to send me a copy of that sheet, I searched the Internet, etc... then I went out of my shop for a coffee and when returning.... .... this is a photo of my shop... can you guess where that sheet of paper was??? Ok ok... It happens...!!! Bye all. Thanks for watching. Happy New Year!
  4. Tiny but loaded!!! I like it!
  5. Ulises Victoria

    What have you received today?

    Are these programs for free, or what is their cost? Thank you in advance
  6. Ulises Victoria

    SOLEIL ROYAL 1669 by michel saunier

    Beautiful and well done beyond words. I am truly speechless and humbled at your build. Best regards!!!
  7. Ulises Victoria

    What have you received today?

    I got these two for my workshop some time ago. Best two items to add to my workshop furniture. https://www.amazon.com/gp/product/B07D71MP5J/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B00Y3P0K1M/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
  8. Ulises Victoria

    What have you received today?

    Hello all. Merry Christmas and a Happy and better 2019. Today Santa got me: A new workshop overall. With this I don't have to worry about paints, glues, stains, sawdust, etc messing up my clothes. A new airbrush/compressor kit Some plastic large spools to use and experiment with my rope making machine(s) Broken parts I had to order for my Royal Louis from Ages of Sail, as well as 3 different thicknesses of thread to experiment with my ropewalk machine(s) Happy Holidays!!!
  9. Sjors, I wish you and Anja the best. I really pray so you can leave your health issues behind. My best wishes
  10. Ulises Victoria

    Vasa deck shift

    When I built my Vasa, I came up with the same problem/question. My research indicated that there was not a fixed pattern on the decks of Vasa. This is how I planked mine.
  11. Hello all. I just found out what I think is an error or mistake in my Mamoli Royal Louis. As you can see in the photo of the plans below, the deadeyes are just in front of the cannons. However, as you can see at the arrows, there are two spaces where supposedly these cannons should be. If I move the chain wale 17mm to the left, as in the next photo, the cannons align correctly with the spaces, but I am afraid that this will change the angle of the shrouds and I don't know what more consequences this may bring. What would you do?
  12. Ulises Victoria

    Error in kit and asking for advise

    A Luigi Volonté in this case.
  13. Update and fixing of an error in kit design. I found out a mistake in the kit. As you can see here, some deadeyes are placed exactly in front of some cannons. The arrows mark openings where the cannons could be placed to clear the deadeyes. Moving the chainwale 17mm to the left made the cannons clear the openings but that would unbalance the whole thing. So after seeking some advise in other thread, I was suggested to re-do the chainwales. So I started by sanding off and replace the planking. Then on to the drawing board to see where the deadeyes wiould have to fit in order to clear the cannons and keep the exact number of them. There were some 5mm and some 4mm deadeyes Here I am checking the new arrangement against the actual placement on the ship. Everything looks good so far. Making a board and starboard copy Finished! Unfortunately one of the futtock strops broke when ungluing it from the old chainwale, and to my dismay, there was none to spare in the kit. So I was lucky to find some replacements at Age of Sails. While they arrive, I'm going to stop work on the chainwales and start work on the yardarms. Thanks for visiting!!!
  14. Ulises Victoria

    Error in kit and asking for advise

    OK! You guys made me do it. First I had to re-plank the chain-wales Next, to the drawing board to mark where the new deadeyes will fit in order to clear the cannons. The short lines mark the 5mm deadeyes and the long lines mark a few 4mm. Had to be careful that the number of deadeyes remains the same. Checking the new arrangement against the actual placement in the ship. Everything looks good so far. Making a copy of board and starboard parts. Finished! Unfortunately, one of the Futtock strops broke when removing, as they were CA glued to the wood, and to my dismay, they were exactly counted in the kit... not one to spare, so I was lucky to find some replacements at Age of Sails. Now I have to wait for them to arrive. So I'm putting apart the chainwales for the time being, and begin work on yardarms. Thank you all!!!
  15. Ulises Victoria

    Possible New Hobby

    Roberto: Welcome to the wonderful world of ship modeling. I hope you will get hooked on this wonderful hobby. Greetings from Monterrey, Mexico.
  16. Thank you all for your comments. Jean-Pierre... nothing is completely fixed at this moment. Some things will be corrected in due time. I appreciate your comment!
  17. Hello Christos. Those blocks did not come with the kit. I purchased them, but can't remember Where. It was long time ago. Chuck makes very nice blocks btw. I took some rope from the kit and served it using Chuck's serving machine. I wouldn't use Chuck's rope for serving. It is a very nice rope to hide with the serving. Use any thick thread for that. And as for the rest of the ropes, I make my own. I have 3 different rope walking machines 😮 Thank you for visiting.
  18. This is how my 1/90 Mamoli Royal Louis looks as of Dec. 9 2018 First stage of masts and bowsprit finished. I'm taking a break from masts and start working on the chain-wales. Yards will follow.
  19. Mini-update. With this set of blocks, I finish the first stage of the bowsprit and masts. I just realized why I must keep building large scale models only: these 1 x 3mm blocks is the smallest I can handle. I just found some 2mm and there is no way I can work with them. 😯 Here is how my ship looks at this stage. I think I'm gonna take a break from masts, and start working on the chain-wales Here they are just being planked. Thanks for visiting!!!
  20. Thanks E.J. and Michael. Rigging is my favorite part of a build. I really don't mind tying several thousands of clove hitches in the ratlines...
  21. Thank you Pat. Your comments are always appreciated. Thank you Nick. Serving is done with Chuck's serving machine. Christos.... more than welcome and thanks for your words and visit.
  22. Hello all, mates. More progress on the bowsprit. My God! This thing deserves a build log all on its own!!! lol Photos are self explanatory, I think. Still, if you have any questions, by all means...shoot!!!
  23. WOW! Outstanding! This is a magnificent ship, and you are doing a magnificent job with it. Congratulations!!!
  24. Sorry I'm late. You are up to a very nice start E.J. Replacing the metal porthole frames with wood ones is a wise move I wish I did when in this stage. Will keep following your build as I am sure I'm going to learn plenty of things that can be applied to any ship model, whatever that is!!! Best wishes

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to provide support to our members in their efforts to raise the quality of their model shipcraft.

The Nautical Research Guild puts on ship modeling seminars, yearly conferences, and juried competitions. We publish books on ship modeling techniques as well as our world-renowned quarterly magazine, The Nautical Research Journal, whose pages are full of articles by master ship modelers who show you how they build those exquisite details on their models, and by maritime historians who show you what details to build.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×