Search the Community
Showing results for tags '74 gun'.
Found 3 results
Hi everyone, To get started again, I will post again the photos I took of the original Bellona model at Chatham last year, with permission from the National Maritime Museum. This model is contemporary with the original design of 1760. The Bellona was rebuilt in the 1780s with some significant changes in port locations, refitted rail on the poop, etc. I prefer the look of the original, and so these photos of the original model are my roadmap through the project. It will take me a while to summarize my own build starting with my re-drafted drawings at 3/16" scale, but I am committed to the task! Best wishes, Mark
My build log... back dated to what I consider my actual date of commencement up to today events. 31 Dec 2013 Found information on HMS Bellerophon on the internet which rekindled a spark. My interest in the Billy Ruffian stems from my joining #141 Royal Canadian Sea Cadet Corps Bellerophon of Welland Ontario Canada in 1967 at 12 and a wee bit years of age. I have not been involved in the cadet movement for over a quarter century now but those great memories haven't died away. 04 Jan 2014 Stumbled onto modelshipworld.com and after skulking about for an hour decided to join the group; intend to actually scratch build the first Bellerophon Looking at various Arrogant class build logs (Vanguard & Bellerophon kits) Looking at Victory and Bellona build logs Looking at tools, build methods and little tricks used Overwhelmed with the work done by others and information available; realize how little I know; determined to do my homework. My last (and only) scratch build was a 27 ft whaler. I was quite familiar with them (and the 30 ft. cutters) as I worked at the boat shed at HMCS Quadra for two summers. Found literature on rigging details on another site; looking for info on mast size details. Got info for plans from forum to order from NMM. Found four plans: HMS Arrogant (too early; they made changes to the design later) HMS Edgar (ordered well before but launched after Bellerophon) HMS Goliath (ordered after Edgar, launched before Bellerophon; should record the changes made from Edgar on) HMS Elephant (built same time as Bellerophon so may be the best plan). £60 each = $107 CDN ... pretty steep. E-mailed NMM to see if there was a “buy in bulk” price discount. These plans are about 3 ft x 7 feet each. Not sure where I can lay them out to use and NMM insists they cannot be copied (to make a working set and keep these clean). This presents a problem. I decided not to look at HMS Vanguard as it was the last of the ships built... well after the Bellerophon... and so might possibly have other changes. 11 Jan 2014 Realize if I download build photos and reference documents into folders from the FORUM and other sites and build my own reference library I will retain more of what I see in my memory (works for me as I am “hands on” type of learner). This has kept me busy! 15 Jan 2014 My ex CPO (a modeller by night and Mechanical Engineer in the Pulp and Paper industry by day) recommended “The Masting and Rigging of English Ships of War 1625-1860 by James Lee; Found on Amazon and Abesbooks.com, pretty pricey at $100+ Found on inter-library loan (Gateneau, Quebec, Government Library, 3 week duration, 3 renewals, no charge); this will allow me to decide (for free) if I should buy the book. Found Rigging Model Ships – A Practicum by Robert E. Hunt 2013 on forum www.lauckstreetshipyard.com at $119 … once again quite steep 16 Jan 2014 Discovered there are two different figureheads for the Bellerophon; Downloaded photographs to my reference library. The first has only the neck and head remaining but is said to have been a full body. The second was torso and head. I intend to recreate the first using the second for inspiration! 30 Jan 2014 Received a collection of modelling reference books purchased from a member of this site. Most turn out to be exactly what this sorrowful example of a modeler needs. Talk about an idiot`s luck! 08 Feb 2014 After some confusion (mostly on my part) I finally ordered and downloaded the TIFF ships plans from NMM. Decided on the TIFF image as it is the clearest possible and I do not have the room to layout 7 foot long plans. HMS Goliath, one image - lines HMS Elephant, two images - lines and deck plans It cost me £150 for the set of three (3) images. They gave me the three JPEG images (quoted at £50 a set) for free. There is a considerable difference in detail between the two types of files. I am not disappointed. TIFF images are 729Mb, 722Mb and 905Mb JPEG images are quite small (1Kb or less) at 300 DPI My PDF program (from which I can measure) will not open the TIFF images because they are too large for it and the JPEG images are too grainy. Converted the TIFFs to PDFs at 1200 x 1200 (Largest the program would allow) and they are very clear! Now I intend to get my measurements off the electronic images and redraw in Solidworks to be able to create templates. I will start my posting of images from here. Might be a while as I have to figure out quite a bit and the first step is always the hardest. Once I have the plans partially redrawn I can make a final decision regarding the scale of the scratch build and degree of finish or completeness as I will also have to decide where the final display resting place might be. I have stepped through to the dark side … no going back now, eh? Following photos are clips taken from my PDF program showing how I intend to get my measurements. I will use the scale provided on the drawings to convert my small measurements to full size. It is difficult to get a perfectly vertical or horizontal measurement so I will need to use some old fashion trig calcs to make corrections like the straw man said in the wizard of oz; record all data in excel and then transfer the info to Solidworks.
Siggi52 posted a topic in Build Logs for SCRATCH SHIP MODEL PROJECTSHello everyone, after I had so much positiv response about the pictures of my model in the gallery, I decided to start a blog about this ship. About the Dragon is to say, it was a third rate ship, designed by Thomas Slade and build at Deptford. Launched 4.3.1760 and sold 1784. It is not the first ship model I have build, but the first 18th century and framed model. A friend told me about the Bellona and I'm interested to learn more about these ships. My first name is Siegfried and that name is program, Siegfried was the most famos dragon fighter here in Germany, or the only? So I would build the Dragon. I ordered the plans from the NMM and a lot of books from everywhere. Then I started learning. Because the whole ship would be too large in 1:48, I decided to build only the stern part, from the 10th frame backwards. After 3 month I started with the model. That was in the winter of 2011/12. In 2012 a friend of mine was in London and I asked him to take pictures from the models at the NMM. That was a great thing and helped me a lot. In 2013 I visited the NMM and the shipyard at Chatham. Here I saw the Superb, the third ship of the Bellona class. That visit changed a lot, you will see it in the pictures. I changed mostly the color of the hull. I will post the first pictures in a fast pass, to get update with the actual level of work. And please excuse my english. Regards, Siggi