Search the Community
Showing results for tags 'Cook'.
Found 1 result
-
Cheerio my friends and fellow modelers To my shame I must admit that I am a complete failure... After completing the Royal Caroline I wanted to take a break for about two months. Time to relax, to clean up the shipyard, to go to cinema or something like this. And then, after this over and over boring time I wanted to return to my desk and start a new project - the Endeavour by Occre. But I did some essential mistakes... First: I opend the box of the kit (which I bought some weeks ago as there was a special offer at my dealer); second: I opend the box; third: I opend the box. In the box there was so much material which I only wanted to control... If everything is ok, no damage etc. And there were the plans... I HAD to compare the drawings with the AOTS Endeavour as all of you will understand. I HAD to see how well-designed the kit is, how much of the Details will be featured and so on... Now I know that the kit seems to be well equipped with all needed timber, fittings, sails. And it came as it has to come... I just started to look at the parts for the keel, I just looked if the bulkheads are well laser-cut. In a very curios manner the parts came out of the plywood Sheets almost from alone... Should I let them be alone there on the desk? Wasn't it my duty to help them into a correct shape? To look if they fit together? I think you know the rest... :D Nevertheless I will know start the Endeavour although the Admiral was talking about craziness and all that nonsense The first impression of the kit after a Close-up: The plans seem to be very good. The rigging plans are full detailled, there is an overview from the top and from the side, there are detail-plans for the masts and yards with obviousley accurate drawings. The plans are very close to the AOTS by Mr Marquardt so that I think there will not be a great need for bashing. Perhaps I will get some other timber for the second planking. The provided lime wood is very cute for the decks and after sealing it with some semigloss varnish it shimmers very warm and smooth. According to the plans the hull should be colored in some kind of yellow which I will surely not do. I think about some oak tree or even teak (perhaps just staining the lime in a somehow teak color). I am not sure if I use the provided yarn, I will do a test before the rigging starts. The yarn seems to be some kind of raw material... The plywood is very thin only 4 mm, should be thicker (at least 5 or 6mm) but I can't change. To gain more stability to the frame I used some wooden blocks to fasten the bulkheads on the keel, I also broaded the stands for the masts. They are originally glued only onto the 4mm keel. I think this is not stable enough. I noticed that the parts are cut extreme accurate. There is almost no need to sand anything (yet) - but we will see. I will use the sails with this model - my first time. I am not sure how this will work... but I think there will be the one or the other to help me Well, that's it for the moment. The next weeks and months will be fulfilled with the Endeavour and - also very important to me - with the history of this ship, his Captain and dicoverer James Cook, with the journeys around the world and all the adventures and enormous knowledge that was collected in that time. See the first pics Cheerio Max
Our Emblem ®
