Search the Community
Showing results for tags 'Halliard'.
Found 1 result
-
I'm still beavering away at working out the rigging for my Sherbourne cutter of 1763. For reasons given in my build log, I decided to go with the rigging plan shown by Petersson in his book on rigging period fore and aft craft -- rather than the plan shown with the kit. However, this has led me to a few puzzles, current of which is how the lower yard was held. Having prepared the shrouds, backstays and Burton pendants, I was looking at the plans for holding the lower yard. Petersson shows the following: This leaves me puzzled as to how the yard was lowered or raised if just a sling was used. The books I have don't give me a straight answer. Several, such as those by Marquardt, show halliards with blocks (as do the plans for the Sherbourne). Others show just a sling, as does zu Mondfeld: Models in the Royal Dockyard at Chatham show some with a halliard and blocks, whilst others show just a simple sling. Thus a model of a 1763 cutter in Chatham shows the lower yard with a halliard and blocks as follows: I'd be grateful if someone could explain to me whether tyes with blocks were used instead of slings (or vice versa), or whether a ship could be fitted with either (depending on circumstances), or whether both were used together. I have a feeling I'm missing out on understanding function here, so any guidance will, as always, be very welcome! Thanks Tony
- 4 replies
-
- 2
-
-
- cutter
- Sherbourne
- (and 3 more)
Our Emblem ®
