Search the Community
Showing results for tags 'Knockabout'.
Found 2 results
-
The build log reconstruction begins... It has been a long time since I’ve started a new sailing ship build, with my sailing ship model (Oneida) taking about 4 years to complete. Ever since building Smuggler, an 1870’s mackerel seiner from Gloucester, I’ve been smitten by 19th and 20th century American fishing schooners. There are a number builds, both in progress and completed, that have been inspiring to me – Bluenose builds, a couple of Ben Lathams, a scratch build of Columbia, and even a few of the “yachty” Americas. Jim Lefever, who’s impressive Benjamin Latham build was a great inspiration for me, provided me with a list of great reading references on American fishing schooners. After receiving a number of them as gifts, and reading through them, I knew my next build would have to be another fishing schooner. I have to admit right up front that Arethusa, an early 1900s fishing schooner and the topic of this build, was never called the “Goddess of Gloucester”. She was a goddess in Greek mythology. The schooner was named after one of Thomas McManus's daughters. I just thought that 'Goddess of Gloucester' fit to her will and made for a catchy name for this log. Arethusa, the schooner, was big, beautiful, and had a colorful history – sounds interesting to me. Enough about my motivations and ramblings….let’s get on with the ship. Arethusa was designed by Thomas F. McManus in 1907 and built by James and Tarr in Essex, Massachusetts, in 1909. She was what is termed a knockabout schooner. Unlike traditional schooners, with bowsprits (and jibbooms, and flying jibbooms), knockabout schooners had an extended bow and no bowsprit. The extended bow essentially placed the fore topmast stay at the same position as on a traditional schooner. With that configuration of stay location the crew wouldn’t be required to climb out on the typically poorly maintained footropes aside the bowsprit in order to perform tasks involving the sails and rigging. This was a Thomas McManus innovation, based on his observations and discussions with fisherman and owners, and was meant to reduce sailing crew injuries and deaths. I am using Howard I. Chapelle’s lines drawing and sail plan of Arethusa from his “American Fishing Schooners”, plate 120 and figure 30. “American Fishing Schooners” (AFS) has a great deal of detail in it’s appendix on most of the features of late 19th century and early 20th century schooners, and it is these I will use to build the details of the model. If anyone knows of more details about Arethusa I would be most grateful to learn of them. I have contacted Mystic Seaport Museum about their collection but found that while Arethusa is listed in their collection they don’t have any more information than that (little) which is shown in AFS. Following are some excerpts from “Thomas F. McManus and the American Fishing Schooners”, by W.M.P. Dunne, on Arethusa: James and Tarr “...completed her on 25 September 1907. Fifteen feet longer than the Pontiac, the Arethusa was, nevertheless, a deep, short ended knockabout, with the typically knuckled straight run of the keel (although with less drag), that Tom favored in this class, and more tumblehome. Once again he experimented with the rig. He stepped the foremast farther forward with the masts further apart. Right from the start, the big fisherman earned a reputation as a speedster. Captain Clayton Morrisey, the Arethusa’s first skipper waxed poetic: “She’s the slickest bit of wood that ever went down to Bay of Islands. Nothing can touch her and an eight-year-old girl’s little finger is stout enough to spin the wheel no matter how fresh it breezes.” “Can she sail?” exclaimed Captain Morrisey, opening his eyes as if he didn’t quite believe his ears. “Why, when we were coming up from the herring grounds she cut out her 13 knots an hour for six consecutive hours.” “We’d see a blotch of smoke away ahead on the horizon and in a little while would make out a tramp steamer bound our way. Pretty soon the Arethusa was kiting alongside the tramp and then we’d lose sight of her astern. She did that trick a number of times.” In fact, with Clayt Morrissey at the helm in 1912, the Arethusa would easily outrun the Canadian Dominion fisheries’ patrol steamer Fiona, “whose commander opined the Arethusa was violating the three-mile limit.” “At the beginning of 1921, soon after the new [prohibition] law was in place, Captain William F. “Bill” McCoy, a sometime Daytona Beach, Florida, boatbuilder, guided his fully-laden McManus schooner, the Henry L. Marshall, past the Tybee Lighthouse and up the river to Savannah, where, in the dark of the night, he discharged not fish, but 1,500 cases of illicit liquor. With the proceeds, McCoy replaced himself with a new skipper on board the Marshall and went to Gloucester in search of the boat of his dreams, Tom’s speedy Arethusa. Although McCoy had fished the Marshall legitimately until after the Eighteenth Amendment dried out the country, he had always thirsted for Arethusa. With Gloucester feeling the effect of postwar economic contraction, the owners of the fourteen-year-old schooner…..sold her to McCoy in April 1921. The Arethusa became a rum runner, a fast freighter of bootleg spirits. McCoy renamed her Tomoka, added a bowsprit so she could carry two jibs, jumbo and jib topsail-and a lot of liquor (she had the capacity of 6,000 cases of illegal alcohol). He brought the Tomoka to anchor just outside the then three mile limit of United States waters, but well within site of the beach. He soon began a thriving business with New York and New Jersey bootleggers…. “ [this is where the term ‘the real McCoy’ came from] Arethusa later returned to fishing, and was lost off Halifax in November 1929. Her particulars are: Designer Thomas F. McManus Builder Tarr and James Launch date 25 September 1907 Gross tonnage 157 tons Molded length at caprail of 127’ – 3” Molded beam 25’ – 0” Molded depth 13’ – 2” Registered dimensions 114.0’ x 25.6’ x 12.5’
- 181 replies
-
- 11
-
-
I previously posted a topic on how to take lines/plans off photos for a very basic sailboat that I learned how to sail in way back when...the camp in Maine where I went had four of these boats and I would like to build scale models of the four boats (named the Loon, Gull, Hawk and Falcon) for the 100th anniversary of the camp next August and donate them at the event. Obtained this brochure page from the president of the company that manufactured this boat (Cape Cod Shipbuilding Company) but no other records exist. I do have several pictures of the boats under sail from old camp pictures and a memory of how they worked but if anyone can provide any additional pointers that would be very helpful. Didn't have any responses so I decided to just dive in to the project. Four of these boats that were purchased by Camp Wohelo were eventually purchased by Camp Hawthorne Here are the boats on Panther Pond, Camp Hawthorne, Raymond, Maine. BTW, the skipper in the first picture is yours truly during my stint as Sailing Counselor in 1967... Current progress to follow...
- 84 replies
-
- 9
-
-
- knockabout
- finished
- (and 2 more)
Our Emblem ®
