Search the Community
Showing results for tags 'katy of norfolk'.
Found 1 result
kearnold posted a topic in Wood ship model kitsI just got a used 1/4=1 MS Katy of Norfolk schooner off of ebay the other day and I need some advice on it. The kit is MISSING the following items: rings for the sails, the boom/gaff yokes, parrel beads, an anchor the belaying pins they say should be in the kit, the rudder, rudder hinge, rudder bar, keel stem and stern post instructions that make a modicum of sense. (what's in included is rubbish), blocks and deadeyes that are not 1/8" in size, mastcaps. What IS in the kit: hull (partly carved), rigging, a packed of itty bitty deadeyes, a packet of really tiny nails, a packet of blocks that a spider couldn't fit a web through the hole, wood for the masts, bowsprit, blocks to carve for the hatch/cabin, two pieces of wood I am guessing I am suppose to make the sternpost, rudder bar and keel stem from, really useless instructions, a packet of itsy bitsy teeny weenie eye pins. I will use the instructions to make sail templates and then make them from silkspan So what i need is advice on where to buy the blocks (in bulk), deadeyes (in bulk), anchor, bit heads or belaying pins (in bulk), mast caps (I will probably make these). The other thing is SIZE of the items needed. Most everything is in MM out there and I don't know what MM is close to scale for 1/4 inch = 1 foot. thanks, Keith BUILDS : AL Scottish Maid (complete) AL Virginia Schooner (under construction)