Jump to content

La Créole 1827 by archjofo - Scale 1/48 - French corvette


Recommended Posts

Link to comment
Share on other sites

Another work of art, Johann.  I'm always amazed.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Hello,

thank you for the comments and, of course, for the LIKES as well. 

 

Today, I present a small update.

The cap for the Mizen mast and the Cheeks still had to be equipped with fittings.
Here are some pictures. I hope you like them.
IMG_0844.thumb.jpg.cdbbf2493ade9174305c5bc33cce8aa3.jpgIMG_0846.thumb.jpg.7309453b06a20fd4ca751762996847b6.jpgIMG_0855.thumb.jpg.dcc4a729d910490be2168fbee3517456.jpgIMG_0863.thumb.jpg.273759a0dadc51e2962b98912f10b705.jpgIMG_0869.thumb.jpg.5223d1143af490035848005349b56c39.jpgIMG_0872.thumb.jpg.5e4c5c707e5453c0ed622279e33f460b.jpgIMG_0878.thumb.jpg.0cc7998b8c8d4006e7699c8f84ed2748.jpgIMG_0898.thumb.jpg.bc4876962a1f1b7106220b7d47c53e80.jpg.
 

Edited by archjofo
Link to comment
Share on other sites

Hi Thomas,

thank you for your nice comment.

Thanks to all the others for the LIKES.

 

In the meantime I made the fittings for the Mainmast cap.
After all, these are a total of 30 parts.
The other pictures show the finished Mainmast cap in different views.

IMG_0899.thumb.jpg.af7b68fc64192dabbfa1ec7104480401.jpgIMG_0903.thumb.jpg.99fd93113c86f3e3dbb6c7abf9c65d2b.jpg

IMG_0910.thumb.jpg.bd968cd4ca211797a3df3bcd9c9a2547.jpg

IMG_0912.thumb.jpg.375b15a83a88fd50088882e26ec36c99.jpg

IMG_0914.thumb.jpg.5a185349b6a485f10e5f995effe52ec7.jpg

 

IMG_0916.thumb.jpg.8d7ec39caf180e4d623ce7a08cc8a131.jpgIMG_0921.thumb.jpg.87a40d0d44b34ab9f2c836ca94c8e9d2.jpgIMG_0922.thumb.jpg.2c12254b94ff9360228d3751dae83da8.jpg

 

 

Edited by archjofo
Link to comment
Share on other sites

Johann, I have a silly question. The diary that appears from time to time with all it's amazing detail in it. Is it a record of your work that's done or do you plan how you are going approach the next step in it? I find myself rebuilding my days work in my head as I am going to sleep and plan my attack for the next step. Maybe I should write everything out if it will help me get results like yours.  Anyway it looks like it would be amazing reading on a rainy day!

 

Kurt

Member: Ship Model Society of New Jersey

Link to comment
Share on other sites

Hello Kurt,
first of all thank you for your interest in my building report.
I'm trying to bring a structure in my work and plan the individual steps. However, not always successful.
My construction report, however, is essentially a record of the work done.

Link to comment
Share on other sites

Wonderful work Johann.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Hello,
Thanks to all for the interest and the nice comments.

To finish the lower masts I have to make the iron bands.
This I made from strips of brass sheet 0.3 mm. To attach the frontfishes there are two-piece hoops.

IMG_0966.thumb.jpg.0428c62efd7379ef9315da35e34918ae.jpg

IMG_0968.thumb.jpg.2632a339d620aaab32b7cac095b86cbe.jpgIMG_0977.thumb.jpg.356722c19eeab2dd1af5ec694f1c030f.jpgIMG_0973.thumb.jpg.fd342122bf2b20046f99d758b23c5fae.jpgIMG_0971.thumb.jpg.6b08e1400e3664acb322bba08345625a.jpg

IMG_0984.jpg

IMG_0979.jpg

Link to comment
Share on other sites

Wonderfully intricate..

 

What size Die have you used to tap that bolt?

Finished builds are 

1/35 Endeavour's Longboat by Artesania Latina

1/36 scratch built Philadelphia Gunboat from the Smithsonian Plans

 

Current build is

Scratch build Boudroit's Monograph for La Jacinthe at 1/36

Link to comment
Share on other sites

Hello Johann,

 

I'm just back from London and also the NMM. There I found something you may be interested in

 

DSC04964.thumb.jpg.0ef3a559e5fe21523dacc92368b20c7e.jpg

 

DSC04965.jpg.fdd97daf36eab6bff42671deda631399.jpg

 

I don't know how the lightning should enter the conductor ;)

 

Your work is as always extraordinary

 

Regards

Siggi

Regards,

Siggi

 

Recent build: HMS Tiger (1747)

Captains Barge ca. 1760, scratch build
HMS Dragon 74 gunner 1760, scratch build

Link to comment
Share on other sites

@Siggi52

Hello Siggi,

thank you for your interesting information and the pictures.
Before the construction of La Creole I was not aware that already in the
18th and 19th century ships were equipped with lightning conductors.

 

@All

Tanks for the nice comments and LIKES.

 

 

Edited by archjofo
Link to comment
Share on other sites

Link to comment
Share on other sites

Thank you Johann!

Without wanting to abuse, could you also provide me with some details about making these small holding tools , p
articularly on the way to realize and implant the small pins with precision :

 

post-763-0-09778600-1480698124_thumb.jpg.eca37427e48108a7aae2f47b40421cc1.jpg.aa82cc6fda0fbff53bbe3b9c95de7dd2.jpg

Thank you in advance and really, congratulations for your wonderful work I have been watching from the beginning.

Patrick

Edited by JOUFF
Link to comment
Share on other sites

@JOUFF

Hello Patrik,
this tool was turned from a brass rod on a lathe.
The retaining pins are made of old drills, for example 0,5 mm, since they have corresponding strength.
The holes for the retaining pins have to be performed very accurately, otherwise the dead eyes wobbles.

IMG_9990a.jpg.ec738c8e6a36e20e1f1f5e7c03441484.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...