Jump to content

Pelikaan Dutch Beamtrawler 1999 by kees de mol - FINISHED - scale 1/75


Recommended Posts

NOTE: In this log I used Photo Bucket to add pictures but after problems with PB all my links to my pictures were blocked. I've replaced most of the dead links with new pictures but that was not always possible. (so there are still some deadlinks and sometimes the sequence is not correct)

 

movie.avi

 

In this buildinglog I will present you the build of the Dutch beamtrawler KW88, Pelikaan.

42,35 x 8,50 x 5,16 mtr

Build in 1999 as the UK 153, Lun Senior, sold in 2007 and named KW88, Pelikaan.

Motor: 2000HP Deutz

 

The ship has sumwings and uses an electric pulse system The sumwing are like wings and do not touch the bottom. With electric pulse the fish jumps of the bottom and ends in the net.

 

I started collecting information, photo's and drawings a few months ago and now I am at the point that I can actually start with the build.

I have a complete set of original drawings and almost 500 photo's

 

It will take some time before I start building this ship because I want to finish the KW49 first.

 

First some photo's of the ship.

 

As the UK 153

59ca5a81ca1d7_153voorkant2.thumb.JPG.bd5363cc6cc4687cbe58c609587c47e2.JPG

 

New registrationnumber

1222442795.jpg.eebe471bf3ba68a85ac87f1e244fb120.jpg

1316420.jpg.cc3ab3dd510021a5e62146aaddca9dd1.jpg

1239876459.jpg.b05dcdc260f917018704f991ee568950.jpg

59ca5b44849be_KW88sumpuls.jpg.291302115a5e5778faa6ef97f66b3b8f.jpg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edited by kees de mol
add description
Link to comment
Share on other sites

It was a problem to find any drawings but I found a very helpfull guy who gave me a complete set of original drawings printed in scale 1:75. I am so thankfull!!

 

 

 

 

 

P1030203.thumb.JPG.7b6064306b8a483702e3d6d87925ffe2.JPG

Edited by kees de mol
Link to comment
Share on other sites

whoa....baby!  you are going to have fun with this!  ;)   I think you've picked the ultimate subject Kees!   just the added detail alone,  makes me dizzy........and those plans are to die for.  :)    I'm in........I'm in!!!!  ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

And now I get to watch you build another fantastic boat.

 

Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

I wonder how he's going to do the cat,  Bob?    scratch kitty..........scratch!  :D :D

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

  • 2 weeks later...

I'm in too! Looking forward to following this build. It's a good looking ship! But, I have a knack for modern workboats and the like. It's a reminder that the marine industry is still alive, and that there's still a lot of variety. They don't have the same type of charm as the old wooden ships and the like, but they have their own charm - and their own challenges in building!

 

Again, really looking forward to it!

~ Ben

___________________________________________________________________________________________________

Current Builds:

'Doll-Boat' - 1:12 scale 40' Cruising Sailboat

S.S. Edmund Fitzgerald - 1:350 plastic kit w/ Photo Etch Parts (On Hold)

 

Link to comment
Share on other sites

  • 1 month later...

Hello everybody,

 

At this moment I have done a lot of work for this model allready. Lots of work will not be vissible when she is ready but is inevitable to get a realistic model. But how good is the feeling when you have (after all the work) a fysical hull in your hands wich look svery good. On the pictures you see the wooden model of the hull. They call this the plug and I will use this in the future to make a polyester mould arround it so I can make multiple hulls out of it. I do this because I want to make two of the same models and maybe I can sell some hull later to other modelbuilders.

The pictures

 

DSCF0090.thumb.JPG.0f1d8cda524305ea91a7955e38ffc3d5.JPG

The templates are ready to trace them on the wood
DSCF0092.thumb.JPG.0c4adcc1ede2562c601c98431458e470.JPG

 

The wood (tDSCF0093.thumb.JPG.8ecd79de6b489aeb1fcbfd9dea0344d9.JPGriplex 3,5mm)

 

All templates traces on the triplex
 

DSCF0094.thumb.JPG.b49506f1ab456be5e9911c38094b6904.JPG

The gluing of the longitudinal cross-sections. I pay attention that they are on the correct line and place according the drawings.

 

And here all the sections together and the top-part glued in places
DSCF0095.thumb.JPG.da799d72cd7af1c25dada6087a8a93ab.JPG

 

And then with the help of several powertools and a lot of sanding by hand sanding the shape of the hull. I have to do this very carefull so I wont sand to much. Most of the finishing I do by hand because you have more feeling and it gives a better result.

(Okay I admit. The sander was not even turned on. My wife made an ACTION-picture. But you can see I lost weigt tough B) )

 

11377232_674912859319027_6879283986863915905_n.jpg.c9a49c7e64f8e949f47ed98efab4293f.jpg

And then after a lot of sanding and filling (lots of times) you see the result. Its nice and smooth and ready for further finishing.

DSCF0098.thumb.JPG.7805abaa5d8d3cf4623c7abf1ed09429.JPG
DSCF0100.thumb.JPG.614d0f7ee312ae6ebf44ac27114f5afa.JPGDSCF0099.thumb.JPG.182be557aee8c1a24c62b8f1d83ae330.JPG



Thank you for watching, like-ing and reply-ing. The build is on and more updates will follow soon!

 

Kind regards, Kees

Edited by kees de mol
Link to comment
Share on other sites

nice plug  ;)  nice shape at the bow too!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Hello Paul,

 

Yes it is my plan to make a fiberglass mould around it and when that is finished I hope to make fiberglass hulls. I want to make two models of this ship. One for the client and one for myself.

 

Regards, Kees

Link to comment
Share on other sites

Link to comment
Share on other sites

I would have expected three parts .. considering the stern and bow shapes, two would still leave you in a difficult postion, as far as I can see ... though, sometimes I'm blind to solutions ;)

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Link to comment
Share on other sites

Link to comment
Share on other sites

  • 2 months later...

I started working on the beamtrawler again. In the summer it's just to hot at the attic so I can't build there. I have done some home improvement instead and build some showcases for a friend.

 

I sanded the hull and painted her with epoxy and the sanded her again. She has a babyskin now, soft and smooth. I also made a start with the halfround and the spraydeck.

59ca6c237480f_Pelikaan(22).thumb.JPG.469c9e6e50475e881f523c7af42691b5.JPG59ca6c6948b2c_Pelikaan(26).thumb.JPG.fbd7b3bd753c2ba4f701bc1b45fcdd5b.JPG59ca6c5271c43_Pelikaan(31).thumb.JPG.8ca8630b83050f0fc1627a0e8b8bfb6b.JPG59ca6c5aceb71_Pelikaan(28).thumb.JPG.302410ebb52e895fb254f53f05c41f7f.JPG59ca6c1c2d448_Pelikaan(32).jpg.4a7b5390e58adc31b5100d844f189d61.jpg

59ca6c5e011ae_Pelikaan(27).thumb.JPG.f5441bf4b0b1e283b67991ac8d89798e.JPG59ca6c1a3777c_Pelikaan(34).thumb.JPG.72a0db3b1a2255db5099a95604652983.JPG59ca6c5aceb71_Pelikaan(28).thumb.JPG.302410ebb52e895fb254f53f05c41f7f.JPG59ca6c15cb87e_Pelikaan(35).jpg.aea5c29823b40f80dd58470d5b60077b.jpg

59ca6c55c3dc7_Pelikaan(30).thumb.JPG.1670459f7c7f2c9656f93e79a722e199.JPG

59ca6c5271c43_Pelikaan(31).thumb.JPG.8ca8630b83050f0fc1627a0e8b8bfb6b.JPG

 

Edited by kees de mol
Link to comment
Share on other sites

Very nice work Kees,

 

as you once mentioned, you are always good for surprises, and I bet you will also have some amazing Solutions for this Project up your sleeve.

Am looking Forward with great interest to the further sequences of the "Pelikaan" build. The split negative mould, and it`s make will be very interesting to see,

I`m curious already....

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

She's looking good,  and thanks for posting, I was beginning to miss your wonderful work, and was about to ask.  Yes it is too hot in the attic in the summer.

 

Bob    

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

Hello Kees,

 

Like NIls, I'm very interested in how you go from here: you started detailing the hull, but I understood that this hull is the master, you are going to use to fabricate a negative mould. But how are you going to get all this fine detail in your final hull? Casting, vacuum?

 

Jan

Link to comment
Share on other sites

On 10-9-2015 at 9:57 PM, amateur said:

Hello Kees,

 

Like NIls, I'm very interested in how you go from here: you started detailing the hull, but I understood that this hull is the master, you are going to use to fabricate a negative mould. But how are you going to get all this fine detail in your final hull? Casting, vacuum?

 

Jan

The plan is I am going to make a two-part fibre glass mould wich I will use to make fibreglass hulls in it. Thats the plan. I have never done it before so I don't know if I can do it. Next updates will show the procces I hope.

 

Regards, Kees

 

 

 

 

Edited by kees de mol
Link to comment
Share on other sites

Nice work on the plug Kees. Splitting the mould along the keel will let you capture all the nice detail on the hull sides with no problem. But the detail on the transom, particularly the vertical pieces, could give you a problem when separating the mould from the plug. Imagine pulling the cured mould sideways away from the plug - those vertical members on the stern will stop the mould releasing cleanly. You might have to remove those pieces from the plug then add them to the model hull during the build.

 

Or have I missed something? You may well have thought this through more thoroughly than I have!

 

Greg

Link to comment
Share on other sites

I am going to use a two part split mould because I saw this in building logs by other modellers. When you split the mouldparts, you start at the bow so you can turn the parts away from aech other. The transom wont give any problems this way.

 

I hope to show you how thing turn out in the next few updates

Link to comment
Share on other sites

  • 2 weeks later...

I was going to ask if you were planning a vacuum form hull..........you are :)   the process on the plug so far is great!    big change from your last build......glad to see you back  ;)     cooling down around here as well !

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Added registration numbers and did some other jobs on the hull. Next job will be mould-making for wich I bought polyester and other stuff.

 

59ca6cf29e539_Pelikaan(35).jpg.a5a4e85ad48b1a2290f70b042eadb762.jpg

Edited by kees de mol
Link to comment
Share on other sites

you sure you want to make a hull?   that plug is looking mighty good.........you could simply build off of it  ;)   very nice!  :)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...