Gundorph Posted August 12, 2015 Share #1 Posted August 12, 2015 I Know, I Know, I Know, another Syren build... But what can i say its a great kit... There are so many there have built it... ( Very Very Very Impressed by all off you Syren Builders ) So i hope i can get help from you if it´s needed.. I will start building in the next couple off days... ( Sorry for my bad English ) Here's what I received yesterday. Gundorph. augie, Dubz, Stubby and 5 others 8 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
GuntherMT Posted August 12, 2015 Share #2 Posted August 12, 2015 No such thing as too many Syren builds! Canute and Gundorph 2 Quote Brian Mystery project coming soon! Current build - Medway Longboat Complete - Armed Virginia Sloop Complete - Carmen (First Build) Link to comment Share on other sites More sharing options...
Larry Van Es Posted August 12, 2015 Share #3 Posted August 12, 2015 Make sure that you check everything in the box against the parts list. Not only will you find out if anything is missing or broken, but later when a lot of the parts are removed, it will help you find a part that you're looking for - not to mention the occasional, "what the hell is that and where was it supposed to go?" Gundorph and Canute 2 Quote Current build: US Brig Syren (MS) Larry Van Es Former President Ship Modelers Association Fullerton California http://www.shipmodelersassociation.org Link to comment Share on other sites More sharing options...
Gundorph Posted August 12, 2015 Author Share #4 Posted August 12, 2015 have checked it all today and it seems that it's all there... Building can begin... Canute 1 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
augie Posted August 12, 2015 Share #5 Posted August 12, 2015 GREAT to see another addition to the Syren fleet. You won't be disappointed in the kit or instructions. And don't worry about your English ---- it's MUCH better than my Danish! Canute, Gahm and Gundorph 3 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
Gahm Posted August 13, 2015 Share #6 Posted August 13, 2015 Welcome to the Syren fleet! Thomas Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
Gundorph Posted August 13, 2015 Author Share #7 Posted August 13, 2015 So i got off to a good start ( I think ) Got a little work done in the shipyard... I roughly sanded the bulkhead´s and glued the keel and stem knee to the bulkhead former... Dubz, Canute and Ryland Craze 3 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
MD11pilot Posted August 13, 2015 Share #8 Posted August 13, 2015 Congratulations on the new Syren kit Gundorph! I'm looking forward to your build. Gundorph and Canute 2 Quote Eric O.<p>Current Build: US Brig Syren, kit Link to comment Share on other sites More sharing options...
Gundorph Posted August 20, 2015 Author Share #9 Posted August 20, 2015 Hey Hey... Bulkheads are glued to the BF. It´s 100% straight . Now it´s on to the fillerblocks tonight. And welcome to my Syren build everybody, Nice to have you along... Canute, Chuck, Dubz and 2 others 5 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
Gundorph Posted August 24, 2015 Author Share #10 Posted August 24, 2015 (edited) Hey... Found the first little issue... The framing templates provided is way out of scale... But then i looked at the plansheet 2 and that scale is correct... Dont now if any of you gays have had that problem??? The picture shows the diffrent issue... The upper model is the correct scale... Edited August 24, 2015 by Gundorph _SalD_ 1 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
jablackwell Posted August 24, 2015 Share #11 Posted August 24, 2015 I am looking forward to watching your build. The Syren is the next model on my list once I complete the Kate Cory. It will be a step up for me with the plank-on-bulkhead format. Looking forward to it! Concerning the templates: Yes, this is a known issue here on Model Ship World. Not sure why it is not fixed at Model Shipways. If you search the forums here for "Syren template" you will see a slew of others who have encountered this. It all works out in the end. Best, ~john Canute and Gundorph 2 Quote Builds: U.S. Brig Syren - 1803 - Model Shipways - First PoB Build Sopwith Camel F.1 - 1916 - Model Airways - Not a Ship!, Completed Kate Cory - 1856 - Model Shipways - Second Build, completed Sultana - 1767 - Model Shipways - First shipbuild, completed Link to comment Share on other sites More sharing options...
Gundorph Posted August 24, 2015 Author Share #12 Posted August 24, 2015 Welcome to my build John... Thanks for the answers on the template issue... jablackwell and Canute 2 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
_SalD_ Posted August 25, 2015 Share #13 Posted August 25, 2015 I think we've all had that problem Gundorph. I used the one from the plan sheets also. Good job. augie, Gundorph and Canute 3 Quote Sal Nautical Research Guild Current USCG Harriet Lane - Model Shipways Complete U.S. Brig Syren - Model Shipways New York Pilot Boat 'Phantom' 1868 - Model Shipways Link to comment Share on other sites More sharing options...
Gundorph Posted August 26, 2015 Author Share #14 Posted August 26, 2015 Good evening.... Got the fillerblocks gluid into place... Also planked the little platform, just waiting on some Golden Oak from CMB... Tonight I have sanded the bulkheads... Just need a little more sanding for the perfect shape.... Gahm, _SalD_ and Canute 3 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
Gundorph Posted August 27, 2015 Author Share #15 Posted August 27, 2015 Must say that i am impressed for the quality off the wood in this kit... Canute 1 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
Jparsley Posted August 28, 2015 Share #16 Posted August 28, 2015 good luck and mind if I tag along? she's looking to be a pretty fun build Canute and Gundorph 2 Quote USF Constellation 1/85 AL Jparsley Link to comment Share on other sites More sharing options...
Gundorph Posted August 28, 2015 Author Share #17 Posted August 28, 2015 Not at all Jparsley... Welcome aboard... Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
Gundorph Posted September 3, 2015 Author Share #18 Posted September 3, 2015 Small Update... The Gun port sills is underway... _SalD_, GuntherMT, Canute and 1 other 4 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
Jparsley Posted September 3, 2015 Share #19 Posted September 3, 2015 Nice lines can't wait till she gets her skin Gundorph and Canute 2 Quote USF Constellation 1/85 AL Jparsley Link to comment Share on other sites More sharing options...
Gundorph Posted September 4, 2015 Author Share #20 Posted September 4, 2015 Good Evening... I got these to 80cm x 120cm magnetic whiteboards today at my work (For FREE)... I immediately thought that i could use them for the plans for my Syren in the Shipyard... Much easier to switch between the different plans... My Shipyard issent that big.... jablackwell, PeterN67, augie and 2 others 5 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
Gundorph Posted September 17, 2015 Author Share #21 Posted September 17, 2015 Gunports in place... Damm that was a lot off sanding and still need a little more... but the worst is over.... I think it looks good What do you??? i am having a blast building this ship. Great kit by Chuck... 22 hours into the build... ( Don´t now if i am slow ) augie, Jason, Dubz and 6 others 9 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
EdatWycliffe Posted September 17, 2015 Share #22 Posted September 17, 2015 The gun ports look terrific, Gundorph. Very smooth. I'm also impressed with the contours of the filler blocks. How did you get them to flow so well with the shape of the hull? Ed Gundorph 1 Quote <p>EdatWycliffe Current Build: US Brig Syren Prior Builds: MS kit Phantom MS kit Fair American Link to comment Share on other sites More sharing options...
Gundorph Posted September 17, 2015 Author Share #23 Posted September 17, 2015 Have not don anything special to let it flow so well... Just pure sanding and a lot of looking at the shape of the hull... If my eyes likes what it sees, it's good enough for me... It´s also Balsawood i`ve used for filler blocks... Easy to shape... Canute and augie 2 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
EdatWycliffe Posted September 17, 2015 Share #24 Posted September 17, 2015 Thanks, Gundorph. I'm still impressed. Recently ordered some balsa. Will try to emulate when it's time for filler blocks. Ed Canute and Gundorph 2 Quote <p>EdatWycliffe Current Build: US Brig Syren Prior Builds: MS kit Phantom MS kit Fair American Link to comment Share on other sites More sharing options...
Jparsley Posted September 17, 2015 Share #25 Posted September 17, 2015 She is looking very nice indeed Gundorph 1 Quote USF Constellation 1/85 AL Jparsley Link to comment Share on other sites More sharing options...
augie Posted September 17, 2015 Share #26 Posted September 17, 2015 Time spent does not matter. She looks good and that's what counts. Canute, Gahm and Gundorph 3 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
_SalD_ Posted September 18, 2015 Share #27 Posted September 18, 2015 Gun port framing looks terrific Gondorph. And like Augie said don't worry about how long it takes just enjoy the time you spend working on her. Canute and Gundorph 2 Quote Sal Nautical Research Guild Current USCG Harriet Lane - Model Shipways Complete U.S. Brig Syren - Model Shipways New York Pilot Boat 'Phantom' 1868 - Model Shipways Link to comment Share on other sites More sharing options...
Gundorph Posted September 24, 2015 Author Share #28 Posted September 24, 2015 What a lovely girlfriend i have. Came home from work today, and she had bought my a gift to the shipyard... What a GREAT DAY... Proxxon KS230 + 2 xtra blades... Now back to the shipyard and work on the Syren... Dubz, Canute, Jason and 5 others 8 Quote Current Build: U.S. Brig Syren Link to comment Share on other sites More sharing options...
Jparsley Posted September 24, 2015 Share #29 Posted September 24, 2015 You lucky stiff lol you need to keep that one around Gundorph, _SalD_ and Canute 3 Quote USF Constellation 1/85 AL Jparsley Link to comment Share on other sites More sharing options...
EdatWycliffe Posted September 25, 2015 Share #30 Posted September 25, 2015 Great gift! Spend more time with the girlfriend and less time with Syren. Ed GaryKap, Gundorph, Canute and 1 other 4 Quote <p>EdatWycliffe Current Build: US Brig Syren Prior Builds: MS kit Phantom MS kit Fair American Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.