Jump to content

HMS Fly by Dfell - FINISHED - Amati / Victory Models - Scale 1:64


Recommended Posts

Sorry - thought I would add this photo as I have just taken it with a mobile phone instead of my usual camera to see if there is any difference....

 

IMG_0519.thumb.JPG.d0208e5b8a1ab5ff04676ab237a938bb.JPG

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

  • 2 weeks later...

Another step forward. Have completed quarterdeck rail with swivel gun posts. 

With the foredeck swivel guns posts I have copied the rear post as to how they sit in conjunction with the trim running along the side of the ship - so as to keep everything the same. Sorry for maybe not being historically correct - on the instructions the front posts overlap the trim.

Side steps and fenders in place.

Also have changed the spindles on the quarterdeck gangways as I did not like the kit supplied ones. Hopefully these look a bit better.

 

_DSC0002.JPG.1b6f3a069e9c73eca187cf46b779ff47.JPG

IMG_0527.JPG.c5716653a4f4d72ea84043751fb066e2.JPG

_DSC0003.JPG.e0a7baca41ff8c7afe6436756f9c22c9.JPG

 

Thank you simonthepieman and Spyglass for looking in and your comments and all the likes from others.

 

 

Regards

 

Doug

 

 

Edited by Dfell

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

Lots of fine detail here in this build. I do like the the decorative peices. Good job.

Regards, Scott

 

Current build: 1:75 Friesland, Mamoli

 

Completed builds:

1:64 Rattlesnake, Mamoli  -  1:64 HMS Bounty, Mamoli  -  1:54 Adventure, Amati  -  1:80 King of the Mississippi, AL

1:64 Blue Shadow, Mamoli  -  1:64 Leida Dutch pleasure boat, Corel  -  1:60 HMS President Mantra, Sergal

 

Awaiting construction:

1:89 Hermione La Fayette AL  -  1:48 Perserverance, Modelers shipyard

Link to comment
Share on other sites

  • 4 weeks later...

Hello - further steps forward. I feel as if I might be half way through the build - am I?

 

Gun port lids done with the bow ones closed.

 

_DSC0006.thumb.JPG.077e16ca5315d4e18cc92bfbae937ac0.JPG

 

_DSC0003.JPG.411277f145877f61796795ffae6c87c7.JPG

_DSC0008.JPG.57deb6f8b37bc81d71af25f4b92ffb5a.JPG

 

Channels, deadeyes and chain plates all in place and secured.

 

_DSC0005.JPG.187bc7b1dc4b598b4556ade775e55ca8.JPG

_DSC0002.JPG.cbee2d1f796af7643b998cfbf2f3a2f8.JPG

 

Thank you S Coleman, Blue Ensign and Martin W for your comments - much appreciated. 

Martin - the fenders are kit supplied so not down to me.

 

The kit has supplied chain plates which have a nice way of overlapping which surprised me as this type of detail does not appear anywhere else in this kit.

 

Regards

 

Doug 

 

 

 

Edited by Dfell

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

Hi Doug -- You are moving along well, and your Fly is filling up with plenty of nice details.  I'm well behind you, but a few days ago wondered if I were nearing the halfway mark.  So I made a list, and realised I'm not even close -- but then again, I'm well behind you (I haven't even started the head work).  And the rigging will take a solid three or four months -- if you put in long hours.

 

Really, though, there are plenty of nice details in your build to look at and admire.

 

Cheers,

 

Martin

Current Build:  HMS FLY 1776

 

Previous Builds:  Rattlesnake 1781

                        Prince de Neufchatel

Link to comment
Share on other sites

  • 1 month later...

Hello - masts and bowsprit shaped (thinner at one end and thicker the other end), fitted (mostly dry fitted). 'fidded', 'bolstered' and 'blocked' as per 7 & 8 Plan sheets.

Masts painted a light cream as walnut dowel was various colour shades. The trestletrees sort of fell apart when cutting them from the laser sheets - 'probablynot' referred to them being badly lasered when he first got his Fly build. Does anyone know what has happened to him - not seen his build for a long time. Hope he is well and the builders have not put him under the concrete floor of his new conservatory......

 

_DSC0004.thumb.JPG.632aef57b1e2d6728de2a08f5741aec9.JPG

 

_DSC0006.JPG.2ac39650f2b720242ebb9163a5ac20e5.JPG

 

The woolding I may have used a too thicker thread and the metal bands are black tape.

 

_DSC0007.thumb.JPG.617064f71431bd4563a57f01e20ba5fd.JPG_DSC0015.thumb.JPG.446829af7547eb5fa839b1b9e2b562d0.JPG

 

 

 

 

 

 

_DSC0014.JPG

_DSC0013.JPG

Bowsprite cap rebuilt as kit supplied was wrong shape.

 

Thanks for looking in

 

Regards

 

Doug

Edited by Dfell

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

Thank you Blue Ensign. Tried to do more with the block work on the bowsprite with seizing etc but found it extremely difficult. :( As with my first build, Supply, I could not rig the guns fully but this time had ago so maybe on the next build might progress a bit more....

Anyway, again thank you very much for your comments - have learnt from your Pegasus build. (when the internet allows me)

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

Looking good Doug :).

 

One point, might be a bit too late for you. The forward "Gun Port" isn't a gun port - it's known as the Bridle Port, and swings forward rather than up. It's used for ventilation to the forecastle, and for access to the anchors when shipping them. See THIS LINK to my build log of HMS Vulture (another Swan).

 

:cheers:  Danny

Cheers, Danny

________________________________________________________________________________
Current Build :    Forced Retirement from Modelling due to Health Issues

Build Logs :   Norfolk Sloop  HMS Vulture - (TFFM)  HMS Vulture Cross-section  18 foot Cutter    Concord Stagecoach   18th Century Longboat in a BOTTLE 

CARD Model Build Logs :   Mosel   Sydney Opera House (Schreiber-Bogen)   WWII Mk. IX Spitfire (Halinski)  Rolls Royce Merlin Engine  Cape Byron Lighthouse (HMV)       Stug 40 (Halinski)    Yamaha MT-01   Yamaha YA-1  HMS Hood (Halinski)  Bismarck (GPM)  IJN Amatsukaze 1940 Destroyer (Halinski)   HMVS Cerberus   Mi24D Hind (Halinski)  Bulgar Steam Locomotive - (ModelikTanker and Beer Wagons (Modelik)  Flat Bed Wagon (Modelik)  Peterbuilt Semi Trailer  Fender Guitar  

Restorations for Others :  King of the Mississippi  HMS Victory
Gallery : Norfolk Sloop,   HMAT Supply,   HMS Bounty,   HMS Victory,   Charles W. Morgan,   18' Cutter for HMS Vulture,   HMS Vulture,  HMS Vulture Cross-section,             18th Century Longboat in a Bottle 

Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi

Link to comment
Share on other sites

  • 2 weeks later...

Hello - swivel guns are all in place. The guns are replacement ones from Cornwall Model Boats.

I unashamedly copied the idea of the brackets from Blue Ensign which consists of some eye hooks straightened and then bent into shape. Then dropped into a brass tube inserted into the upright stand. 

 

_DSC0002.JPG.f238385210333ec6c9a2204fd17769ab.JPG

(Sorry, out of focus)

_DSC0001.JPG.fbf1b0fefc64d5329149e2cd1e497ab1.JPG

 

_DSC0003.JPG.4f92975ef5b8a81b50f122e35472e023.JPG

 

Not sure the best way to arrange the cannons - either tidy or every each way..... Mind you they will probably end up every each way once starting on the rigging.

 

Dan - Thanks for looking and your comments. Have taken note :)

 

_DSC0006.JPG.5a7eaf9f2fa816ef77a76068db14f5b4.JPG

 

 

Thank you for all the 'Likes' - much appreciated. Thank you.

 

Regards

 

Doug

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

  • 2 months later...

Hello - further steps forward.

 

Thanks Blue Ensign for looking in and thanks for your good ideas :)

 

Ships boat done (metal hull supplied with upgrade kit). A strip was added along sides for wale and painted black.

 

IMG_0068.thumb.JPG.fcd62f15f64b639cf853c9a0533909c6.JPG

 

IMG_0599.thumb.JPG.43889f06b195b867a2fa8cf941148ec3.JPG

 

_DSC0001.JPG.de96b6b3d651bb86e7e1ba8958e3979b.JPG

 

_DSC0003.JPG.dc329e995cec3e02a6334a8125a2d66a.JPG

 

Yards are also all done as per plans.

_DSC0004.JPG.910d51bb3e5e95a56e590d20d7086597.JPG

 

Slight modification to fixing. Used tape banded around yards (painted yellow) with parts from upgrade kit for the Stunsail Boom

_DSC0005.JPG.d95c03ba59b86342593d49dc2e4c8c23.JPG

 

It's good to see more Fly builds on here.

 

Regards

 

Doug

 

 

Edited by Dfell

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

Thanks Blue Ensign - sort of glad to get them done but it now means the rigging is next:(

The plans look difficult to see precisely what is happening in regards to some of the rigging.

I do have a question concerning the 'tusks' on the bow - they are shown on the rigging plans but no construction details.

Am guessing they made with 2mm dowel or maybe 3mm and about 40mm in length?

 

IMG_0614.thumb.jpg.1574ab823ed0ebebbe667b6f8db4fcb0.jpg

 

Thank you to those looking in the the 'likes'.

 

Regards

 

Doug

 

 

 

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

Those are the Boomkins Doug, used to spread the Fore tack.

 

I took my dimensions from Steel and making them from 3mm dia dowel tapered down to 2mm. with a shoulder on the outer end to secure the Fore Tack shoulder Block.

Outside of the False rail there is a downward curve in the spar, this was induced by firstly soaking and then curving over a suitable former.

No need to be in a rush to fit the Boomkins, they just fit into holes in the  face of the Foc'sle.

 

The angle and position of the Boomkins depends to some extent by whether you fit seats of ease to the heads, and whether you fit a false rail which is notched to take the passage of the Boomkin.

 

B.E.

Link to comment
Share on other sites

Okay - Thanks for the information Blue Ensign. Wont worry about seats of ease but may put a rail /netting and as you say no need to do the Boomkins yet.

I take it a length of 40 mm will be fine?

 

Thank you

 

Doug 

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

  • 2 months later...

Hello - have just completed shrouds and ratlines.

had realised that I had forgotten the supports under the quarter deck. There should be two - one in the middle and one on the end. At this late stage just put one on end as the other is not seen.

 

IMG_0616.JPG.248e8704d1832a93f9b2748b80637525.JPG

 

 

Used pieces of balsa wood to help with the spacing between deadeyes.

 

IMG_0627.thumb.JPG.e5554fb5ac1893482ec819436f49a8dc.JPG

 

_DSC0008.thumb.JPG.0cba46baf56b22e5eafa002141b8e1db.JPG

 

 

_DSC0011.thumb.JPG.44800ddd496ed5927f7f5859341931b3.JPG

The futtock staves are attached to eyelets bent over to make a hook. 

The ratlines are natural thread dyed with diluted walnut stain and the spacing between is 5mm or at least meant to be.

_DSC0012.JPG.57c4f780a239b84797e4cd5451564da7.JPG

 

_DSC0010.JPG

 

 

 

_DSC0014.thumb.JPG.cd02a536194f10f1e3cf68c36ca10eb6.JPG

Felt I could have done better with the rigging - not completely happy with it.

Anyway the main preventer stay I guess next.

 

Thanks for looking in.

 

Regards

 

Doug

 

 

 

 

 

Edited by Dfell

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

Thank you Blue Ensign. The shrouds maybe not tight enough - odd wobble here and there.

No way can I achieve what you do with all the historical accuracy - it’s hard enough just to do the basics

Doug

Edited by Dfell

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

Not really apparent on the photo's Doug :)

 A tip for the future, I don't tend to tie off the deadeye lanyards too soon in the build so that I can come back and tweak the shroud tension after I've completed the standing rigging but before I fit the ratlines.

 

If it really is a bother you could re-do the deadeye lanyards or one cheat you can try for slack shrouds is to attach a line around the upper end beneath the tops, and bowse them in a little; but as you have fitted the futtocks this may slacken them off, requiring them to be re-done.

 

Sometimes these things loom larger in the eye of the builder than the observer. :)

 

B.E.

 

 

Link to comment
Share on other sites

Wow! that's some impressive progress, Doug.  I'm envious that you're on the rigging now -- I'm stalled at the tangle of bits and pieces in the head structure.

 

Cheers,

 

Martin

Current Build:  HMS FLY 1776

 

Previous Builds:  Rattlesnake 1781

                        Prince de Neufchatel

Link to comment
Share on other sites

  • 2 months later...

Hello -  Thank you for the generous comments and 'likes'. Martin - just get on with it :)

Sheet 10 nearly done with the Crowsfeet to do. So that is all the Stays and Preventer Stays.

 

_DSC0017.JPG.e759613a3f02722c052c5da97793c63c.JPG

Have this book which has been a great help as the plans at times are hard to see what's what.

_DSC0015.thumb.JPG.5028a949c59cb64f4ad8cc5d66a6c2db.JPG

 

Clear illustrations.

_DSC0016.JPG.bd455fc9a18943f211415e4a1476e419.JPG

Mouses shaped from bits of dowel turned on a Proxxon lathe.

_DSC0019.thumb.JPG.2fd13dd53de5207d6e4406cee84fcede.JPG

 

_DSC0004.thumb.JPG.19529d4bc389dbe2812fc30ad230d487.JPG

 

Fore Topmast Stay and Preventer Stay secured. Ends will be sorted with a rope coil later.

_DSC0005.thumb.JPG.18db494dbf8e0853679f88e6359f906d.JPG

 

Overall pictures.

_DSC0001.JPG.e0d400eb5b5c99b124c77d70fe51d10c.JPG

_DSC0006.JPG.4e5f4626f88083b5a6ff54e19d8a05a0.JPG

_DSC0002.thumb.JPG.1d71ea215e84bc0704c729e98980a315.JPG

Thanks for looking.

 

Regards

 

Doug

 

Edited by Dfell

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

  • 2 weeks later...

Hi Doug -  I'm just starting a Pegasus and was looking at your Fly blog - - were the balsa block you used in the bow and stern section part of the kit or something you added?  Looks like a great idea for more glue area and smooth curvature.

 

SkipW

Link to comment
Share on other sites

Hello SkipW - the balsa is not supplied as part of the build - it seems a things that a lot of builders on this site do as it does help with the tricky extreme curved sections.

Good luck with your build - you will have have plenty of good examples for guide in your build especially Blue Ensign  (I expect you have seen his Pegasus which probably inspired you to have a go)

Regards

 

Doug

Completed: HM Brig Supply - JoKita / Caldercraft 1:64

HMS Fly - Caldercraft 1:64

HMS Sherborne - Caldercraft 1:64

HM Brig Flirt - Vanguard 1:64

                   

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...