Jump to content

HMS Pegasus by betamale - Victory Models - 1:64 Scale


Recommended Posts

I had put the build on hold for a couple of years due to other commitments. I restarted just after Christmas. I always feel a bit daunted by the far higher level of build elsewhere on the site and can not hold a candle to them, but maybe there is something to contribute by making a log. I owe a massive debt of gratitude especially to Blue Ensign as I have pretty much used his log as a "How to" although the quality of my ship falls short, the order of build and small changes he has made have been invaliable.

 

Firstly a couple of pictures showing the current state of play.

 

 

 

post-939-0-92417300-1451803459_thumb.jpg

post-939-0-39866200-1451803493_thumb.jpg

post-939-0-91566300-1451803517_thumb.jpg

post-939-0-32472100-1451803548_thumb.jpg

post-939-0-26806000-1451803575_thumb.jpg

Link to comment
Share on other sites

I am currently making a tentative start on the spare masts.

 

Firstly I milled out a 6mm square slot in some wood to hold the pieces steady

 

Not being in possession of a 4 jaw chuck, I found that holding the piece in a short length of air pipe with the flats packed out centred everything nicely as well as protecting the part.

 

I then return the part to my holding jig and have filed/milled the flats into the mast. This was achieved with packers. The mast is 6mm square. The first to be reduced is 4mm, so a 1mm packer under the mast raises it the correct height. Turned 4 times this appears to work nicely.

 

 

 

post-939-0-62432500-1451804008_thumb.jpg

post-939-0-75846900-1451804452_thumb.jpg

Link to comment
Share on other sites

Coming along very nicely.  Thanks for sharing your build with us :)

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 months later...

Progress has been slow in the ship yard. I find that only having an hour or so at a time is not long enough to get your head round what you are doing, then you have to start again next time.I have made a start on the lower masts and made up a fishing davit. Again a combination of kit and following Blue Ensigns mods. Not anywhere near his standards, but inspired by.

I am not sure what to make a start on once the lower masts are done. I need to get my head around or of build again after the long lay-off.

post-939-0-57685400-1462599810_thumb.jpg

post-939-0-64733100-1462599830_thumb.jpg

post-939-0-74819000-1462599859_thumb.jpg

Link to comment
Share on other sites

She's looking impressive betamale, nice work. :)

 

It's always a problem getting back into a build after a lay-off, I was the same. One thing you perhaps need to consider now is the attachment of the heart collars on the Fore and Main mast to take the stays, always easier at this stage, and it looks like you are close to starting the lower standing rigging.

 

ps; thank you for your kind references to my build.

 

B.E.

Link to comment
Share on other sites

  • 1 month later...

Ha, I am terrible! I have not really touched Pegasus for a few weeks. Work has been mad and I have spent more spare time with family than with the shed. Which is exactly as it should be. Thank you for your kind words. I will look at the order of build as you suggest B.E. In fact I very much appreciate your suggestions as I do not have the same grasp on this as you do.

Link to comment
Share on other sites

I think you are more than holding a candle to others on this site (certainly me) , it looks absolutely brilliant! I keep finding myself drawn to these Pegasus builds, what a lovely kit. I love the contrast between the planking and chainstays, really nice. 

Link to comment
Share on other sites

  • 1 month later...
  • 4 months later...

Another addition to my extremely sporadic log and build. I had a very relaxing few days making and painting. As always I have used Blue Ensigns build as inspiration.The next step is making the hearts for masts as suggested 6 months ago! Luckily this is not a time dependent hobby.

 

Happy New Year everyone.

post-939-0-96068000-1483255463_thumb.jpeg

post-939-0-02392200-1483255471_thumb.jpeg

post-939-0-32453300-1483255478_thumb.jpeg

post-939-0-81933100-1483255486_thumb.jpeg

Edited by betamale
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...