Jump to content

Solö Ruff by Nirvana - Nordic Class Boats - 1:10 scale


Recommended Posts

Solö Ruff

 

This is my build log of Solö Ruff, first an introduction of the boat itself.

This boat was built  by Storebro from a design
by Einar Runius
(1897-1967), a famous Swedish boat designer.

It´s a truly elegant, cabin-boat combining elegance with ruggedness,
roominess and comfort with the maximum in cockpit and deck utility.

In all the Solö series, a total of 2800 models were built beetween 1951 and 1964:

 

            Solö Ruff I (1951-53)
            •Length: 6,85 meters
            •Breadth: 2,00 meters
            •Displ: 1,1 ton
            •Engine: Penta BB41

            Solö Ruff II (1953-57)
            •Length: 7,00/7,15 meter
            •Breadth: 2,10 meter
            •Displ: 1,25 ton
            •Engine: Penta BB50

            Solö Ruff III (1957-1959)
            •Length: 7,35 meter
            •Breadth: 2,44 meter
            •Displ: 1,30 ton
            •Engine: 1 or 2x Penta BB70
          

  Solö Ruff IV (1959-64)                        
            •Length: 7,25 meter                                      
            •Breadth: 2,20 meter
            •Displ: 1,25 ton

 

Solö does not have any brass detailing but instead high polished steel.

This is something I will try to highlight.

She was built clinker style, either oak or mahogany. Mostly mahogany.

 

This model is based on the 1960 boat which became the most popular one.

​Solö was intended for the international market and likewise it had a huge success.

Still today many of the boats can be found at various Vintage Boat Shows. 

The most common engine was now Volvo Penta BB115. A very reliable and
strong engine. Still Solo was capable of speeds up to 24 knots, but cruised best around 15 knots

 

I hope you will enjoy this adventure with me.

 

So let’s start with intro of the model kit.

It’s a Nordic Class Boats by atlastmodels.se, manufactured by TurkModel.

Historic reference is Lennart Ivarsson, Storebro Trading

Credit should also go to Thomas Ahlander for the cover illustration.

post-967-0-57656900-1462860721.jpg

 

Upon opening the box I was greeted by a color paint schematic.

This to help with painting the boat.

post-967-0-86090300-1462860770.jpg

 

 

The build process is not provided by any means in words as we normally have an instruction booklet of some kind.

There is one sheet covering the parts and one sheet with a little recommendations, no instructions.

post-967-0-98360200-1462860805.jpg

 

The building process is very much like Billing Boats with sketches instead.
But everything is easy to understand and straight forward.

post-967-0-24024900-1462860866.jpg

 

 

 

The hull is built in two halves to be glued together.

post-967-0-59338200-1462860909.jpg

Totally there is 8 sheets A3 format as for instructions.
Solo can be built either as a static model or as a RC.
She will be built as a static.

 

All pieces except for the planking is laser cut to high quality.

​Edit: planking is laser cut as well due to profile and port/starboard separation.
Some of the parts almost falls out by gravity.

post-967-0-00956500-1462860944.jpg

 

 

 

I am extremely happy and surprised by the keel piece.

Even though the box itself is on the edge of being too small.

The keel is straight as an arrow.

So there is nothing to worry about in that matter.

The kit is a plank on frame.

I haven’t decided yet how to approach the engine as it would be great to have a 1:10 scale engine inside of her.

How and where I would find such I don’t know. I will probably leave it out or make a coarse dummy.

post-967-0-83288200-1462860985.jpg

 

All the metal pieces are made out of Britannia metal.

There is a flag that is accurate color wise.

post-967-0-14618500-1462861093.jpg

 

 

 

Included in the kit there is actually soft material for cushions.

post-967-0-69840800-1462861140.jpg

 

Now before starting anything:

Here is some stats about the kit.

Length: 72 cm, 2’ 4 11/32

Width: 22 cm, 8 21/32

Height: 20 cm, 7 7/8

Weight finished: ? Kg and ? Lbs

 

The first thing is now to get a build foundation for the two halves.

For that I am using shelf parts from the old office.

It will work for now.

 

I will also start working on varnish test as I like to get as close to the dark mahogany finish as possible for the hull.
The deck will have a light finish. For the varnish I will start with Min-Wax products.

 

Any questions and input is as usual very welcome.

Edited by Nirvana

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Oh look.. a comfy chair.   Looks to be something a bit different, even in the runabout category.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Mark,

You are very welcome to something different, please help yourself at the self service area where various items are at your disposal. I even sat up a "help your-self" bar for those that are into such. Maybe a nice smooth Scotch. There will always be fresh brewed Swedish coffee.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

John,

For this build I have arranged ten really comfy chairs and you are the second.

Make yourself comfortable and the coffee is fresh!

Edited by Nirvana

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Looks like I get the third chair! This looks interesting!

-Elijah

 

Current build(s):

Continental Gunboat Philadelphia by Model Shipways

https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/

 

Completed build(s):

Model Shipways Phantom

http://modelshipworld.com/index.php?showtopic=12376

 

Member of:

The Nautical Research Guild

N.R.M.S.S. (Nautical Research and Model Ship Society)

Link to comment
Share on other sites

Link to comment
Share on other sites

Hi Per

This will make a nice change from sail boats. :)

There are 1/10 scale engines available, but they are silly prices i googled 1/10 scale engine and got a load of them :)

Edited by Cobr@
Link to comment
Share on other sites

As all the parts are laser cut, so there will some sanding to get rid of the burn marks.

This picture will show the burns to the left with their starting points, the other side is worse.

post-967-0-88950400-1463032506_thumb.jpg

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

  • 4 weeks later...

Due to an accident, I am short of five parts for planking.

Because of this I don't feel to work forward.

I am currently in contact with the retailer for the kit, who in their turn are in contact with manufacturer for replacement part.

I hope this will have a positive outcome.

If not, I have taken pre-active measures to have other material available.

As for price of the extra material I am not that thrilled, but I think the final finish will truly justify the extra cost.

Considering the original boat had mahogany planking my solution should be fine.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Per, the offer of some Swedish coffee sealed the deal. We drink Gevalia here. ;)  I too will follow along. :dancetl6:

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Sanding the burn marks is a delicate and unenviable job, trying to get rid of the burns and at the same time keeping the size and shape of the part the same as the original laser cut :huh:

Link to comment
Share on other sites

When I had problems with my "Bohuslän" I contacted the Swedish company NCB. What a bunch of @#*!s. The respons was something like "oh, how bad..."

 

I then contacted the Turkmodel, they who make the models for NCB and they sent parts at once with apologies and "if there are any more problems contact us at once..."

So try contacting them directly...

Mr. Pucko

 

Building:

Royal Caroline - Panart

Nuestra Senora del Pilar - Occre

Bounty - Occre

Titanic - Amati

Endeavour - AL

Santissima Trinidad cross section - Occre

Link to comment
Share on other sites

  • 6 months later...

An old shelf from the previous office will work as a build table.

It's wide enough to hold both sides.

I added on with waxed paper to avoid any glue to get stuck to the build area.

post-967-0-74683500-1482185036.jpg

In order to keep everything straight, I drilled two holes in the false keel and tighten it down with two regular wooden screws.

post-967-0-23849900-1482185114.jpg

 

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

I am so glad I bought some Lego some years ago.

Perfectly square unless there has been a production problem or "you might have had" them little to close to a heat source.

That's not the case today.

The bulk heads for the port side are all in place.

I am using Titebond II.

I have also decided not to make her a RC model. She will be a static model for the office.

The first picture shows how bad the laser setting has been while cutting, the chard is hard and tough to sand down without removing to much material.

post-967-0-58426700-1482190491.jpg

Picture 2-4 is showing the Lego support but also the stringers to align the bulkheads.

They are spot on! They are not glued down just inserted, to much char to get any good glue connection.

post-967-0-49247400-1482190739.jpg

post-967-0-85862400-1482190828.jpg

post-967-0-65609900-1482190853.jpg

Now it's time to turn the build table and repeat for the starboard side.

 

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Relaxing in front of the TV sanding chard of the frames for starboard side.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Progress during the day and evening.

Even the Admiral was impress once back home from events.

The sanding of the laser chard was a progress itself as this hull is clinker shaped.

If each frame/bulkhead would have circular shape it would had been a faster process.

Now the two sides are done.

Resting time until planking.

Strange how the smell of laser chard dust clings to your body while sanding.

post-967-0-15691100-1482301623_thumb.jpg

The tabs for the propeller and rudder shaft is to removed once the hull is assembled and planked.

post-967-0-32854200-1482301599_thumb.jpgpost-967-0-89367000-1482301611_thumb.jpg

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

  • 2 months later...

So, I am back to my Solö, and got started working on her.

I am so embarrassed, not thinking it through in the beginning I made two port sides!

And I used CA gluing it all.

To my relief I was able to dissolve the glue and got everything apart without anything broken.

P1030400.thumb.JPG.a6b1b7f67a5eedb1e91668573a6ec9e6.JPGP1030401.thumb.JPG.85df29bcc4a4ffa2ebcd9ae74f2dfaee.JPG

 

Now I can build the starboard side.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

This thing is huge! I'm curious as to what detail items are included in the kit? Doing that gun deck section was cool at 1:25 - lots of items you wouldn't even consider at 1:48 or 1:64. This could be even better.

 

If you want to bash a little, you might try looking at some model car sites. A bud builds these and he adds things like miniature Car & Driver magazines, cigarettes, traffic tickets. There's a ton of little odds & ends you could add to this. Just a thought.

Sail on...... Mike         "Dropped a part? Your shoe will always find it before your eyes do"

Current Builds:                                                          Completed Builds:

Lancia Armata 1803 - Panart                                   US Brig Niagara - Model ShipwaysSection Deck Between Gun Bays - Panart  ; Arrow American Gunboat - Amati    

 Riva Aquarama - Amati                                           T24 RC Tugboat  ;  Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo                             

                                                                   
                                                               

Link to comment
Share on other sites

Mike,

 

I have recovered the huge error and now have a starboard side.

In this picture, the two halves are joint with clamps.

And as for a comparison you have the Longboat in front.

P1030410.thumb.JPG.026b8a57ebb12c5bb6355687330e12fc.JPG

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

I decided to deviate from the "picture instruction".

Sheet three shows how to plank the two halves, and then on sheet four it's time to join the two.

But here is where I started thinking, and went for joining before planking, this way I able to use clamps to the fullest for maximum glue contact.

Am going to bed and let this sit over the night. I never counted the clamps but I am certain there is some 25-30 clamps holding this together.P1030411.thumb.JPG.c633d1908ad6c46898857d9895dfc5be.JPGP1030412.thumb.JPG.efbac9093254a6e28ab91aa5caf28b02.JPG

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

This kit is huge, it will total 72cm almost 28 1/2" long.

I used 36 clamps to hold together the two halves.

Now some beveling of frames and get the first two strakes shaped prior installation.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

The planks provided are not labeled according to order of installation.

Only the starboard side has the numbers correctly in order, while the port side is labeled weirdly.

P1030415.thumb.JPG.749419d7695d88eac00bff6e59e735c6.JPG

Having one side correct is good enough for me but could be confusing for some who is strictly going by the numbers. Because then it will be wrong.

P1030414.thumb.JPG.e99d4ab679eca51ef6a363ac4ec9c5fe.JPG

 

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Ohoh, dry-fitting items are a good thing.

Found a production error.

On frame 5 and 6 the distance for the plank is off.

Frame 5, plank two the gluing surface for the plank is 12.75,  plank three the gluing surface for the plank is 17mm.

Frame 6, plank two the gluing surface for the plank is 17mm, plank three the gluing surface for the plank is 15mm.

With plank four the error is almost as good gone. But I need to create "frames" on the inside for support.

This seems to apply to both sides of the hull.

If you look closely on port side it is visually obvious as well.

P1030416.thumb.JPG.9bf362f334df0bb399db92fa8701d758.JPG

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

There is a lot of missing instruction for someone who is building this kit for the first time, specially if you don't have any experience.

Such as to bevel the strips where they are meeting the bow on the false keel.

The first two frames and stern piece has to be beveled to in order to get maximum surface contact.

P1030418.thumb.JPG.213c99b83792ef5ace53feafe985990a.JPG

 

I used the technic of bending the planks only using heat.

I didn't use a hairdryer as Chuck does in his instruction video, but a hobby heat gun.

Worked like a charm.

 

Adding on with more pictures, some of them really makes this kit look like a monster.

 

P1030423-1.thumb.JPG.c9ccaa7a9e8a20791535fa70e9e9db3c.JPG

 

P1030425.thumb.JPG.b3649a0eb09848870c9480aa64899a43.JPG

 

With the two halves joined the false keel is 8mm thick, there will be a lot of sanding/trimming and sweating to get a sleek bow.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

At this stage I stopped, it was getting late in the evening, but I diluted titebond glue with some water and applied all over inside of the planks where they were meeting.

This created a stronger bond and the planks stopped flexing between the frames.

For a 72 cm (28.5 inches) long boat, it uses only 5 frames.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Once I have six planks installed I will add on with simulated frames, even though they will be below open area floor deck.

P1030433.JPG.3c450136c0cfbe605f167bafdffe9fb2.JPG

Everything will be stained/varnished to create the mahogany look of the wood as of the original boat.

nn16-6.jpg

 

 

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Can I sit in? You are going way too fast. you will finish this kit before I finish my Long Boat.

Current Builds - 18th Century Longboat, MS Syren

Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18

On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, 

 

Its a sailor's Life for me! :10_1_10:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...