shipcarpenter

Triton Cross-section by shipcarpenter 1:48

Hello,

 

this is my first attempt at building ship (ok part of ship) from scratch. I think it will be a good practise for beginning.

I dare not to build whole ship yet and I also do not have so much space at home for 1:48 ship.

I choose american walnut for main parts. I got this wood from my work - it is not a common species here in Europe.

It is hard and has a beautiful dark colour. I made the first 3 pieces according to plan. 

 

post-2337-0-27991300-1470410002_thumb.jpg

Share this post


Link to post
Share on other sites

Ok you are good to go and have access to the drawings..

 

Have fun with the project

Canute and mtaylor like this

Share this post


Link to post
Share on other sites

Hello and welcome to the build. Off to a very nice start. The Walnut will make a very nice model. Looking forward to more... :)

mtaylor and Canute like this

Share this post


Link to post
Share on other sites

Hello Ships Carpenter. I agree with your thoughts of this as a practice beginning, I am also doing the same thing with my cross section. And I like your idea of using an exacto blade the way you did. I would have never thought of that. Now I have a new tool for my ship building. I'll be watching your build as you go along. Have fun Mike.

mtaylor and Canute like this

Share this post


Link to post
Share on other sites

Hello,

 

thanks for access to plans and for welcome to Triton builder´s club.

 

Mike thanks for looking and comments - it is not my idea with this scratch tool I saw it in some Triton full build here.

Exacto blade was not ideal (very brittle)- it was only try on photo - better is blade from snap-off knive.

 

I am working on frames - next time I add some photos of this work.

mtaylor and Canute like this

Share this post


Link to post
Share on other sites

Hello,

 

So I printed plans of frames, numbered them and glued them on 5mm thick wallnut sheet. here was important to glue the pieces straight and correct - as I later recognized and must redo 5 pieces, but with 9x11 pieces it was ok.

And then made a little dust in my living room with scrollsaw. I enjoyed this work and with my proxxon saw blades it was quickly. 

I clean up ends of every piece , for this I has no machine, but for this was enough chisel and sandpaper glued on small rectangular wooden stick.

I glued each plan of assemly on a small platte 9mm MDF. And then try and adjust the pieces until it finally clicked together.

I glued them step by step I let the glue to dry and then added other pieces.

Little training with treenails.   

post-2337-0-27380400-1473968867_thumb.jpg

post-2337-0-74482100-1473968876_thumb.jpg

post-2337-0-21574200-1473968886_thumb.jpg

post-2337-0-00002500-1473968895_thumb.jpg

post-2337-0-55293400-1473968909_thumb.jpg

post-2337-0-91231100-1473968914_thumb.jpg

post-2337-0-69085200-1473968921_thumb.jpg

post-2337-0-38930000-1473968929_thumb.jpg

post-2337-0-05455800-1473968938_thumb.jpg

post-2337-0-06818500-1473968949_thumb.jpg

post-2337-0-18638500-1473968964_thumb.jpg

post-2337-0-42663000-1473968991_thumb.jpg

post-2337-0-54281400-1473969012_thumb.jpg

post-2337-0-96407800-1473969022_thumb.jpg

post-2337-0-31337400-1473969032_thumb.jpg

post-2337-0-24721300-1473969043_thumb.jpg

post-2337-0-98664500-1473969051_thumb.jpg

post-2337-0-80715800-1473969063_thumb.jpg

Canute, egkb, WBlakeny and 8 others like this

Share this post


Link to post
Share on other sites

Hello,

 

little update, here are the wrong pieces I must replaced with better ones.

I made building board of old furniture board. Also marked off space for keel( false keel).

Glueing keel with false keel together - I used PVA glue with black acrylic paint - It is not so good visible but maybe it come out with coat of varnish.

Last thing is unify joints for keel in every frame, I fixed frames on board with rectangular attached pin which fits to the groove for keelson. Then sanding until keel fits perfectly to the rabbet.

post-2337-0-60869300-1475329905_thumb.jpg

post-2337-0-56627200-1475329999_thumb.jpg

post-2337-0-20502000-1475330289_thumb.jpg

post-2337-0-76212800-1475330451_thumb.jpg

post-2337-0-18030900-1475330467_thumb.jpg

post-2337-0-09860800-1475330481_thumb.jpg

post-2337-0-24247700-1475330489_thumb.jpg

post-2337-0-30993200-1475330501_thumb.jpg

egkb, GuntherMT, druxey and 7 others like this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.