Jump to content

Pelican, later renamed as Golden Hind, by Baker - FINISHED - scale 1/45 - Galleon late 16th century


Recommended Posts

13 hours ago, G.L. said:

Patrick, is that the kind of stair you are searching for?

Yes. The stairs will look like this

 

greetings, 

patrick

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Beautiful work, as usual, Patrick.

 

Just out of interest, how tall is that "crew member" in your last photo?

 

Steven

Link to comment
Share on other sites

 

6 minutes ago, Louie da fly said:

Just out of interest, how tall is that "crew member" in your last photo?

Thanks steven.

The average length of a man in the 16th century may have been 160 cm.
160 cm : 45 = 3.6 cm to scale

 

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Link to comment
Share on other sites

Hello,

Started with re-making the wrongly made pieces. The same method has been used to make them.
The discs are made of plastic.

IMG_20180924_193056.thumb.jpg.8456f015faa5a5d9d3bc108ddac7d6b1.jpg


After painting, the discs are mounted without glue.

IMG_20180925_184230.thumb.jpg.29f4acff21eeef709bb3f8aa1788cc16.jpg


The hole is now also being drilled trough the discs. That way I drill in the center of the disk.

IMG_20180925_184758.thumb.jpg.6a2d0f6f71437231a3e8696353e0cf49.jpg


And secured with a brass pin.

IMG_20180925_185605.thumb.jpg.839abb407e70a4715a9f5e61901b3ebf.jpg


Extra detail

IMG_20180925_191056.thumb.jpg.252a155b13a4cb4f1086384a9c840d27.jpg


painted and ready for assembly.

IMG_20180926_183313.thumb.jpg.4ffae1aa56103efda38962c5463eb547.jpgIMG_20180926_183406.thumb.jpg.f98cc67cec93ae0e88ddb27cad60a40f.jpg

 

The height ratio of the piece to the model and the size of my assistant is much better now.

IMG_20180926_185657.thumb.jpg.2414a84ef8d11bf85f9bf65e10baa670.jpg
To be continued. Thanks for following.

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

The following parts are ready and installed.

IMG_20181001_165007.thumb.jpg.4ed87e9d998447ade1fd6159c81f1dac.jpgIMG_20181001_165035.thumb.jpg.33f1870b97053828ceb911ac21a0c100.jpg

 

From now on, the shipyard is on hold for a while. I have had pain in both arms for some time.
Doctor's conclusion: tennis elbow on both arms, so rest for a while, no model building, no gardening... grrrr.

 

Thanks for following, 

And it is not because the shipyard is on hold, that I will not be active on this forum :dancetl6:

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

12 hours ago, Backer said:

From now on, the shipyard is on hold for a while. I have had pain in both arms for some time.

Doctor's conclusion: tennis elbow on both arms, so rest for a while, no model building, no gardening... grrrr.

 

Thanks for following, 

And it is not because the shipyard is on hold, that I will not be active on this forum :dancetl6:

Patrick, my advice: Play tennis with one arm at the same time 😁.

 

G.L.

Link to comment
Share on other sites

4 hours ago, Barbossa said:

Hi Patrick

 

I'm looking forward to your recovery. 

Circumstances may differ : sometimes life get's in the way of hobby-matters.

Get well & take care.

Thanks, I'm doing my best.

 

1 hour ago, G.L. said:

Patrick, my advice: Play tennis with one arm at the same time 😁.

 

G.L.

LOL 😂

I do not like sports.  The only "sport" i do is rifle shooting (completely legal according to all Belgian laws of course!!) :pirate41:

 

 

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Patrick,

 

Caught up all I can say is well done. Really like your methodology attacking problems, wish I was that focused. I'm a flitter flit here flit there then forgot where I flitted last. Kudos:cheers:

John Allen

 

Current builds HMS Victory-Mamoli

On deck

USS Tecumseh, CSS Hunley scratch build, Double hull Polynesian canoe (Holakea) scratch build

 

Finished

Waka Taua Maori War Canoe, Armed Launch-Panart, Diligence English Revenue Cutter-Marine  Model Co. 


 

Link to comment
Share on other sites

Patrick,

 

Take care - time does heal most things (or so I've been told) 

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

  • 4 weeks later...

Hello

Have not started building again. But I did start thinking about the next step. The places where the deadeyes and schrouds are attached.

I do not know the correct English name, but in some logs they are called "chains". Strange "chain"  means something very different for me in the English language??

 

Looking through my documentation there are several possibilities.

A simple method as on the Vasa ship (early 17th century) and also applied to most Golden Hind scale models. And, an older method where multiple vertical support beams are used.
The second method seems better for this time (about 1570-1580). She can also be seen on drawings by Mathew Baker. So it becomes the second method.

IMG_20181007_122237.thumb.jpg.7ec3c00163f7577acc29a88fdfcd78ea.jpg

IMG_20181007_120714.thumb.jpg.20c4a25c6c4fa97a9babc319ad40b2c1.jpg

 

Biggest question: how wide were these things? I find narrow and wide versions in my documentation.

IMG_20181007_120647.thumb.jpg.f68ec533104d6e11f11b35e9419df5da.jpgIMG_20181007_120700.thumb.jpg.9ccbf8f1231ff0dffa13cbee0caadeeb.jpgIMG_20181025_082400.thumb.jpg.13985a7d5eb2f54eaaf2641887e84e56.jpg


So first i test how wide they should be on my model, to get no problems later with the schrouds who can come against the hull.

Somewhere in a log I saw this method. Ideal if you work without a plan.

IMG_20181025_081917.thumb.jpg.ab91a0986ea05fd1513b931f9f9abb69.jpg
So we go for the wide version (no other choice) otherwise I will get into trouble later. This makes about 90 cm (3 feet) on a real ship.


Reasonably wide, but it can explain how they could place barrels here that served as sanitary facilities.

IMG_20181025_082040.thumb.jpg.ea012a55fef84719923f752867d2fce0.jpg

 

Thank you for following, and hopefully more updates soon.

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Looking good, Patrick. I think you're right going with the multiple support beams (which would probably be described as "knees") - they seem to be quite common in ships of this time.

 

Regarding the name "chains", the lower deadeyes at the ends of the shrouds are fixed to the hull with iron chains, as you can see in the first and second pictures in your post. The widened wales that support both these chains and the shrouds themselves are called "chain wales", which got shortened over the centuries to "channels". However, that whole section of the ship is often just referred to as "the chains". Hope that clears it up.

 

How wide the channels themselves were - your guess is as good as mine. However, there is some archaeological information - I don't know if the channels survived on the Mary Rose which was maybe 50 years before the Pelican  (the photos of her all seem to be taken from inside, so you can't see them) but they certainly did on the Wasa which was maybe 50 years after. 

 

But again I think you're right in making them wide enough to support those barrels. You could probably get a pretty good idea by scaling off from that last picture - you have the size of the sailor next to the barrel, so you can estimate the size of the barrel, and thus work out how wide the channel would have to be to fit both the barrel and the shrouds/deadeyes.

 

Steven    

Edited by Louie da fly
Link to comment
Share on other sites

Thank you for explaining the "chains / channels" question.

 

Good idea to look at channels of the Mary Rose and other ships. Turned out i have a drawing of the MR.

doorsnede.thumb.JPG.0be731fd2328da9a2d4d86e89508cd63.JPG

Looking at Mary Rose I find about 65 cm. 

The ship with the barrels is about 75 cm

My channel of 90 cm is therefore very wide. it will have to be thinner.

 

Thanks for following and likes

 

 

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Indeed Jan

After having checked my problem a second time. The channels can be made 1.5 mm smaller without getting into trouble.
So about 85cm wide to scale 1/1

 

Thanks,

Edited by Backer

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

I'm backing up a bit... about barrels.  It was common for the cooks to bring up the barrels of salt pork, drain off the brine and add fresh water to them to dissolve the salt.  These barrels would often be fixed to the channels so to keep them out of the way.  I've also read about the men "hanging" as such, off the side to do their waste disposal when the facilities at the bow had a long line.  So, I guess my question is, were the barrels holding dinner or waste?  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Thank you lawrence.
Fortunately I was on time with my elbow problem. And with some pills, stretching exercises and a few weeks already planned holiday there is already improvement. It will not be long before I go back to gardening and modeling

 

Mark,

There is indeed a very interesting thesis on this subject (thank you Mark)
Placing barrels here will be very challenging in weathering the model. Whatever their intention was

 

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Just discovered your fantastic build. Your photos are excellent and extremely helpful. That Tudor Rose and the way it was created floored me (I'm a rookie). Thank you for sharing...Moab

Completed Builds:

Virginia Armed Sloop...Model Shipways

Ranger...Corel

Louise Steam Launch...Constructo

Hansa Kogge...Dusek

Yankee Hero...BlueJacket

Spray...BlueJacket

26’ Long Boat...Model Shipways

Under Construction:

Emma C. Berry...Model Shipways

 

Link to comment
Share on other sites

Hello everyone and thank you Moab.

 

Slowly restarting with building and started with the vertical parts of the channels.

First the necessary wood is sawn.

IMG_20181029_062712.thumb.jpg.881a2b52a4548c6ecd6655aafaebeb0d.jpg


These pieces are first colored and finished before gluing to the hull. 

IMG_20181103_155807.thumb.jpg.ac4d6cb6ef9235c664e2d62ab6361959.jpg

IMG_20181029_062624.thumb.jpg.2d205f9c92f3f7cbff4845c413740f54.jpg

 

This is now done on the two sides.

IMG_20181029_114132.thumb.jpg.01d73aa8e26a0fa2450ba826124cb5bd.jpg

 

To be continued, thanks for following

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Hello,

 

Thank you G.L.   Glad to be back on the shipyard !

I made and attached the channels and the "knees" below these channels.

 

measurement, making and glueing.

IMG_20181029_114057.thumb.jpg.0b714749f22a1c2b5eb57cafe2069ad6.jpgIMG_20181109_180310.thumb.jpg.bd3cb810cfbcad8d6eb1c83b6d03dbef.jpgIMG_20181111_115258.thumb.jpg.2213f47fdedca54e32fe0767f3ab1be4.jpg

 

Lower knees in progress

IMG_20181110_154637.thumb.jpg.1bbe5c7b80d6de05645bb38b5d3144a3.jpgIMG_20181111_112100.thumb.jpg.41c566e05dd7c443f8926616c9858514.jpg

 

ready

IMG_20181111_113551.thumb.jpg.7f10db05d799f3bff4e42e5f0c7f180b.jpg

 

Thanks for following.

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Patrick,

 

As always brilliant work!

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Hello everyone,

 

Thanks Michael and Zappto for the comments and everyone for reacting.

 

Short update. The channels of the main mast are ready. 

IMG_20181113_150701.thumb.jpg.b600d005cb12167f3cb42035361dc4ba.jpgIMG_20181117_071937.thumb.jpg.008b8d2f59cb7dde25800f9ea8f065f8.jpgIMG_20181119_112420.thumb.jpg.549177fbef120b6078d8c9c5c1c20799.jpgIMG_20181119_112834.thumb.jpg.60f173e328bf229e51bbe5d98f290a01.jpgIMG_20181119_112920.thumb.jpg.f259213bedabb782399edc8140bda31e.jpgIMG_20181119_113159.thumb.jpg.83b3e674530d5b9d436c1262d6ef0905.jpg

 

Now, i continue with the channels of the fore mast. This will not be a simple task at first sight. 

If I place them at the same height as on the main mast (red line), then they are is too wide at the front.
If I place them higher (yellow line), Then the width of the channel is ok, but  the upper part of my vertical pieces are too short

IMG_20181119_154202.thumb.jpg.789c0181e39ce6230fb96c97a039a232.jpgIMG_20181119_154128.thumb.jpg.5c0b45f91a1af453e687daf5d72610cc.jpgIMG_20181119_115026.thumb.jpg.909167a6d8a422f37408d8b61aa68ea8.jpgIMG_20181119_115046.thumb.jpg.f4693912b73b83f357ea1fad100e5784.jpg

So there is first some thinking and testing to do before i can build further.
"Advice or tricks" are always welcome :blush:;). For me the challenge is getting them at the same heigt (red line)

 

Thanks for following

 

Edited by Backer

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

  • 2 weeks later...

Hello,

 

After some searching and testing i restarted building again. 
During this period, the channels can be at different heights on the hull. Probably they were placed  where they fit best and there were no specific rules in the 16th century.

IMG_20181120_095139.thumb.jpg.8f0d2f3e4841f3d8568a23237c966b1c.jpg


The channels of the front mast are under construction.

IMG_20181120_101847.thumb.jpg.bab3a30c9152e5e3b820460423e5c05c.jpgIMG_20181120_101946.thumb.jpg.9e46ac91aba89bb01ec6041a19bfbceb.jpgIMG_20181202_113407.thumb.jpg.777cf974605545bd8bb51ded7e0ebda1.jpg

 

In the meantime I received "assistance". 
Felix the cat, he is now part of the family for two months and is eight months old. 
He prefers to help build tanks in our heated kitchen. For the moment, he does not like the "cold" shipyard in the attic

IMG_20181115_190120.thumb.jpg.5a7318ed7f9af9c99be0355b53a2409d.jpg

 

Tired of helping in the tank factory. Turn off the light please, i need sleep... ;)

IMG_20181105_120518.thumb.jpg.597ac91300b98526d3940a2bc2f20733.jpg

 

Thanks for following

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Patrick,

 

I see that you've already employed a rat exterminator :10_1_10:

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Hello everyone

 

Michael, he has not caught a rat yet. But mice are no longer safe in our garden..😸


Continue with the model.
The channels have finally been installed. There were quite a few difficult pieces to make.

IMG_20181211_090847.thumb.jpg.99735d3fade209c7158775ca6eaeffea.jpgIMG_20181211_090904.thumb.jpg.8abce57124d614aa43a07192af05a6ff.jpgIMG_20181211_091014.thumb.jpg.58c1480114a2f50a9966bf825fefff5e.jpg

 

I think I'm going to place the cannons now.

IMG_20181211_110942.thumb.jpg.8874e426b0d72793f298c1d2458815d8.jpg

 

Thanks for following and likes.

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...