Jump to content

Inexpensive powered rope walker


Recommended Posts

While completing my previous build, I was very unhappy with the anchor ropes supplied because they were completely out of scale. After some research I decided to build my own rope walker. It only cost me about $50 AU to make. The main cost was the motor and coupling. Perspex I had left over from another job and the variable speed/on off attachment from my Domanoff Serving Machine proved most useful. Mini bearings were very cheaply sourced from eBay. I have labelled each picture in an attempt to show how it was constructed. I intend to make as many ropes as possible for my current build - Caldercraft's Bounty when the time comes. Hope somebody gets some ideas from this post.

 

Cheers

Steve

post-1505-0-46772300-1477110596_thumb.jpg

post-1505-0-50405000-1477111019_thumb.jpg

post-1505-0-38339400-1477111077_thumb.jpg

post-1505-0-17966600-1477111146_thumb.jpg

post-1505-0-51722200-1477111226_thumb.jpg

post-1505-0-68298300-1477111285_thumb.jpg

post-1505-0-84962000-1477111359_thumb.jpg

post-1505-0-83558100-1477111423_thumb.jpg

post-1505-0-28217500-1477111468_thumb.jpg

Hornet

 

Current Build: - OcCre Shackleton’s Endurance. 

 

Completed Ship Builds:

                                     Caldercraft - HM Bark Endeavour. (in Gallery)

                                    Caldercraft  - HMAV Bounty (in Gallery)

                                     Caldercraft - HM Brig Supply (In Gallery)

                                     Aeropiccola - Golden Hind

                                                        - Constitution

                                     Clipper Seawitch (maker unknown - too long ago to remember!)

                                     Corel - Victory

                                     Modeller's Shipyard - A Schooner of Port Jackson - In Gallery

                                                                      - Brig `Perseverance' - In Gallery

                                                                      - Cutter `Mermaid'- In Gallery

                                                                      - Sirius Longboat (bashed) - In Gallery

                                                                      - Sloop Norfolk - In Gallery

                                      Completed Cannon:   - French 18th Century Naval Cannon

                                                                      - Napoleonic 12 pound field piece

                                                                      - English 18th Century Carronade

                                       Non Ship Builds - Sopwith Camel - Artesania Latina

                                                                   - Fokker DR1 - Artesania Latina

                                               

Link to comment
Share on other sites

Ha Ha Brian. Building one was enough. ;)

 

Cheers

Steve

Edited by hornet

Hornet

 

Current Build: - OcCre Shackleton’s Endurance. 

 

Completed Ship Builds:

                                     Caldercraft - HM Bark Endeavour. (in Gallery)

                                    Caldercraft  - HMAV Bounty (in Gallery)

                                     Caldercraft - HM Brig Supply (In Gallery)

                                     Aeropiccola - Golden Hind

                                                        - Constitution

                                     Clipper Seawitch (maker unknown - too long ago to remember!)

                                     Corel - Victory

                                     Modeller's Shipyard - A Schooner of Port Jackson - In Gallery

                                                                      - Brig `Perseverance' - In Gallery

                                                                      - Cutter `Mermaid'- In Gallery

                                                                      - Sirius Longboat (bashed) - In Gallery

                                                                      - Sloop Norfolk - In Gallery

                                      Completed Cannon:   - French 18th Century Naval Cannon

                                                                      - Napoleonic 12 pound field piece

                                                                      - English 18th Century Carronade

                                       Non Ship Builds - Sopwith Camel - Artesania Latina

                                                                   - Fokker DR1 - Artesania Latina

                                               

Link to comment
Share on other sites

Nah Brian, I'll leave the commercial side of things to others who are much more qualified than I. I've got lots of great ideas from this site so I'm just sharing an idea that may spark others to create something similar - or better - for their own use. :)

 

Cheers

Steve.

Hornet

 

Current Build: - OcCre Shackleton’s Endurance. 

 

Completed Ship Builds:

                                     Caldercraft - HM Bark Endeavour. (in Gallery)

                                    Caldercraft  - HMAV Bounty (in Gallery)

                                     Caldercraft - HM Brig Supply (In Gallery)

                                     Aeropiccola - Golden Hind

                                                        - Constitution

                                     Clipper Seawitch (maker unknown - too long ago to remember!)

                                     Corel - Victory

                                     Modeller's Shipyard - A Schooner of Port Jackson - In Gallery

                                                                      - Brig `Perseverance' - In Gallery

                                                                      - Cutter `Mermaid'- In Gallery

                                                                      - Sirius Longboat (bashed) - In Gallery

                                                                      - Sloop Norfolk - In Gallery

                                      Completed Cannon:   - French 18th Century Naval Cannon

                                                                      - Napoleonic 12 pound field piece

                                                                      - English 18th Century Carronade

                                       Non Ship Builds - Sopwith Camel - Artesania Latina

                                                                   - Fokker DR1 - Artesania Latina

                                               

Link to comment
Share on other sites

Greetings Hornet;

 

That is a very clever little set-up!  Congratulations on your ingenuity,  and thanks for sharing this with us.  I think I'll have a go at making something similar.

 

All the best,

 

Mark P

Previously built models (long ago, aged 18-25ish) POB construction. 32 gun frigate, scratch-built sailing model, Underhill plans.

2 masted topsail schooner, Underhill plans.

 

Started at around that time, but unfinished: 74 gun ship 'Bellona' NMM plans. POB 

 

On the drawing board: POF model of Royal Caroline 1749, part-planked with interior details. My own plans, based on Admiralty draughts and archival research.

 

Always on the go: Research into Royal Navy sailing warship design, construction and use, from Tudor times to 1790. 

 

Member of NRG, SNR, NRS, SMS

Link to comment
Share on other sites

Thanks Mark.

 

Post some pics when you've build yours.

 

Cheers

Steve

Hornet

 

Current Build: - OcCre Shackleton’s Endurance. 

 

Completed Ship Builds:

                                     Caldercraft - HM Bark Endeavour. (in Gallery)

                                    Caldercraft  - HMAV Bounty (in Gallery)

                                     Caldercraft - HM Brig Supply (In Gallery)

                                     Aeropiccola - Golden Hind

                                                        - Constitution

                                     Clipper Seawitch (maker unknown - too long ago to remember!)

                                     Corel - Victory

                                     Modeller's Shipyard - A Schooner of Port Jackson - In Gallery

                                                                      - Brig `Perseverance' - In Gallery

                                                                      - Cutter `Mermaid'- In Gallery

                                                                      - Sirius Longboat (bashed) - In Gallery

                                                                      - Sloop Norfolk - In Gallery

                                      Completed Cannon:   - French 18th Century Naval Cannon

                                                                      - Napoleonic 12 pound field piece

                                                                      - English 18th Century Carronade

                                       Non Ship Builds - Sopwith Camel - Artesania Latina

                                                                   - Fokker DR1 - Artesania Latina

                                               

Link to comment
Share on other sites

  • 2 months later...

Hornet,

Well you certainly answered my mechanization question completely. That is a beautiful piece of machinery. I'll have to get into my grandkids Lego box and see what I can find. I do have lots of fishing snap hooks. That rope is beautiful. Thanks for sharing.

 

Regards

Edited by ca.shipwright
Link to comment
Share on other sites

  • 4 years later...
On 10/22/2016 at 12:46 AM, hornet said:

While completing my previous build, I was very unhappy with the anchor ropes supplied because they were completely out of scale. After some research I decided to build my own rope walker. It only cost me about $50 AU to make. The main cost was the motor and coupling. Perspex I had left over from another job and the variable speed/on off attachment from my Domanoff Serving Machine proved most useful. Mini bearings were very cheaply sourced from eBay. I have labelled each picture in an attempt to show how it was constructed. I intend to make as many ropes as possible for my current build - Caldercraft's Bounty when the time comes. Hope somebody gets some ideas from this post.

 

Cheers

Steve

post-1505-0-46772300-1477110596_thumb.jpg

post-1505-0-50405000-1477111019_thumb.jpg

post-1505-0-38339400-1477111077_thumb.jpg

post-1505-0-17966600-1477111146_thumb.jpg

post-1505-0-51722200-1477111226_thumb.jpg

post-1505-0-68298300-1477111285_thumb.jpg

post-1505-0-84962000-1477111359_thumb.jpg

post-1505-0-83558100-1477111423_thumb.jpg

post-1505-0-28217500-1477111468_thumb.jpg

Very creative! What are your Lego cogs part numbers?

Link to comment
Share on other sites


 

Larry

Leno cogs are marked z24. Diameter 25mm. Wheels (pulleys) on trolly are marked 1-05. 30mm diameter. 

Hornet

 

Current Build: - OcCre Shackleton’s Endurance. 

 

Completed Ship Builds:

                                     Caldercraft - HM Bark Endeavour. (in Gallery)

                                    Caldercraft  - HMAV Bounty (in Gallery)

                                     Caldercraft - HM Brig Supply (In Gallery)

                                     Aeropiccola - Golden Hind

                                                        - Constitution

                                     Clipper Seawitch (maker unknown - too long ago to remember!)

                                     Corel - Victory

                                     Modeller's Shipyard - A Schooner of Port Jackson - In Gallery

                                                                      - Brig `Perseverance' - In Gallery

                                                                      - Cutter `Mermaid'- In Gallery

                                                                      - Sirius Longboat (bashed) - In Gallery

                                                                      - Sloop Norfolk - In Gallery

                                      Completed Cannon:   - French 18th Century Naval Cannon

                                                                      - Napoleonic 12 pound field piece

                                                                      - English 18th Century Carronade

                                       Non Ship Builds - Sopwith Camel - Artesania Latina

                                                                   - Fokker DR1 - Artesania Latina

                                               

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...