Jump to content

Soleil Royal by Hubac's Historian - Heller - An Extensive Modification and Partial Scratch-Build


Recommended Posts

To begin with, let’s go through a timeline of events, per Jean Peter’s research:

 

1660-1667 - Puget is primarily in Genoa, where he carved the statues of the Blessed Alessandro Sauli, as well as Saint Sebastian for the basilica of Cargnan.

 

July 18, 1667 - Puget issues his 11-demand list of requirements for employment at Toulon, via D’Infreville.

 

January 30, 1668 - Puget (aged 45 years), meets with LeBrun and Girardon in Paris.  Subsequently, Colbert agrees to bring Puget to Toulon.

 

According to Mr. Peter - even before Puget’s arrival at Toulon, there was much in-fighting among the 34, or so, sculpters and artists employed by the arsenal. The hope of Colbert and D’Infreville was that Puget’s artistic credibility would lend oversight and organisation to the proceedings at Toulon.

 

June 19, 1668 - Assignment for design of the ornament for Le Dauphin Royal and Le Monarque awaits Puget, upon his recovery from illness in Genoa.

 

July 8, 1668 - Puget arrives in Toulon where he sees the carved work that is underway for the Royal Louis, as designed by LeBrun and Girardon.

 

End of July, 1668 - Puget at work designing ornamental sketches for the I’le de France and Le Paris

 

December 11, 1668 - Girardon completes decoration of the Royal Louis, and is busily making a wax model for the Dauphin Royal.

 

It is not explicitly stated, but implied by Mr. Peter, that this wax model is derived from Puget’s design for the DR.  If so, this would be quite remarkable, if Puget were to arrive in Toulon on July 8th, and complete the DR’s ornamental scheme in less than a month, before moving on to the I’le De France and Paris.

 

Perhaps it is more likely, as Tony Devroude notes in his two-part NRG article on the design of the DR, that Girardon was solely, or primarily, responsible for the DR’s ornamentation.

 

Personally, I have not dug deeply enough to have an opinion on that, one way or the other.

 

January 1669 - Workshop painters and guilders complete the finish work to the Royal Louis’s ornament.

 

End of February 1669 - all sculpters are busily carving ornament for the Monarque.

 

Again, it is implied that Puget designed the Monarque’s ornamentation, in addition to both the I’le de France and one of his best known ships, Le Paris - later to be re-named and re-decorated as Le Royal Therese; this is simply an astounding pace of work!

 

End of May 1669 - the Monarque nears completion, and the Duke of Beaufort makes the following observation:

 

“The Monarque has almost all his sculpture in his place and already much gilding, he will not be ashamed of the king, if he had had the leisure, Puget would have done wonders.  His entitlement [translation of “entetement” unclear], he deserves to be in Paris like Girardon.”

 

End of June 1669 - Puget returns to Toulon, from Genoa, to discover that Tureau and Rombaud had taken [unclear whether it was some or all] the ornament from the previously completed Royal Louis, and placed it on the Monarque, which had subsequently served as the flagship of the Duke de Beaufort.

 

This caused quite a great deal of conflict between Puget and Tureau/Rombaud.  It is this switching out of the Monarque’s ornament, in my opinion, that creates the confusion between the RL and the Monarque.

 

Because of the number and arrangement of the guns in the portraits I have noted to be the Monarque, I believe those portraits really do represent the Monarque, at this earliest stage of her career, under command of Beaufort, and before her forecastle is cut down.

 

Why the presence of her forecastle “hinders navigation,” as noted by others - and must be removed - I can not say.  Frankly, that part of the narrative makes no sense to me.

 

Likewise, I will later illustrate that what I truly believe is actually the ornamental sketch for the stern of the Royal Louis, specifically includes the family armes for the Duke de Beaufort. Yet, why those arms do not appear to have also been transferred to the Monarque for service under Beaufort’s command - I can not say.

 

It is clear, though, that they are missing from the lower stern balcony in both Monarque drawings attributed to Puget.  Those drawings are sufficiently clear to see both the armes of Louis XIV, and the armes of France, in the two stern balconies above.  Perhaps the omission of the Duke de Beaufort’s armes is Puget’s revenge for swapping out his ornamental scheme.  Or, perhaps, those drawings of the Monarque were done before the swap, and instead reflect the tremendous similarity between the two ships.

 

I think it is more likely the latter and will show why in my next post.  For today, though, I have run out of time.

 

To be continued...

 

 

Edited by Hubac's Historian

We are all works in progress, all of the time.

Link to comment
Share on other sites

Looking forward to reading what you compile. This era and especially the French vessels from the era, has fully captured my attention and I expect that I will be spending many future years building models that will benefit greatly from your research. Thank you for all you have shared to date and thanks in advance for the knowledge yet to share. :)

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

Very interesting! I did not dare to translate from the French sources.
I'm looking forward to the next part.
Sorry that I have not written anything for so long.
There was a lot of work in our home.
To the question asked some time ago, if I want to build the Reine. Yes, I started a waterline hull of this ship.

 

 

Link to comment
Share on other sites

Hello, Chapman! That is awesome news about La Reine.  Are you doing a complete scratch-build, and will there be a build-log for the project?

 

So, to continue the timeline:

 

July 18, 1669 - Colbert issues instructions to D’Infreville to limit Puget’s influence to a supervisory role in the workshops.

 

September 1669 - Louis Matharel succeeds D’Infreville, and firmly adopts Colbert’s edict that the ornamentation shall be secondary to the ship’s sailing qualities

 

End of May 1670 - Royal Louis ornamentation and painting complete.

 

The implication, here, is that this concludes the second attempt at finishing the Royal Louis, and that the ornamental scheme very closely follows the illustration within the book, Uber Den Wellen Bin Ich Einzigarten - the German language exploration of the Royal Louis’s ornamental scheme.

 

Although, I still think the cover art is Puget’s drawing of the Monarque, enlarged, the stern drawing, within [that is the actual subject of analysis] is amazingly detailed and displays all of the hallmarks of design that are noted in Arnoul’s eye-witness description; Arnoul and pics to follow.

 

And so, for Chapman’s sake, I’d like to offer an apology for seeming too sure about something before I had really looked at it.  Heinrich has sent me pictures from the book, and he will, at some point, forward a copy, which I will then read in detail, and “data-mine” as Heinrich puts it.  The pictures, alone, though, seem confirmation enough of Arnoul’s description.  But, I’m getting ahead of myself...

 

July 10, 1670 - D’Infreville writes to Colbert to inform him of Puget’s proposal to create 5-6 models of sterns, which could then be broadly applied to the new ships being built at Toulon - mixing and matching figures, as dictated by the architecture and idea of the ship.

 

This proposal by Puget signals his increasing dis-interest in the ornamental design of the King’s ships.  They have hemmed him in so much, that he no longer aspires to complete creative control.

 

What’s interesting to me, though, is that among the Monarch, the Royal Louis, and the portrait that I believe to be Soleil Royal, there is a certain commonality in the structure and arrangement of the stern balconies and quarters.  In all three, there are these marine horse figures supporting the lower stern balcony.  And it appears that SR, like the Monarque and RL, also appears to have the split-tailed triton figures supporting the main deck quarter gallery and stern balcony.  Maybe I just want it to be so, but it seems plausible, even if the photo is too grainy to reliably read for detail.

 

Throughout Peter’s research, there is not one mention made about Puget’s collaboration or involvement with LeBrun for the design of Soleil Royal.  This does not mean, of course, that he wasn’t.  If he were, though, it is not discussed, and it seems that he was not really present at Brest, during this timeframe.

 

Perhaps, though, these Puget models actually were created, and they helped inform LeBrun’s ornamental scheme for Soleil Royal.  I have no answers, here, only questions.

 

What can be factually ascertained is that the famous Berain drawing of Soleil Royal’s refit stern design is inscribed, across its top, with the following:  “Apres Pierre Puget”.  I will have to check again, though, to be sure that it doesn’t say “Par Pierre Puget,” which would mean something else.

 

“Apres” would suggest “after,” or “in the style of” Pierre Puget.  So, I personally believe Puget influenced LeBrun’s design; however directly, I can not say - yet there do appear to be certain Puget hallmarks that Berain retains into the new design; principal among them, the large full-figure sculptures of The Americas, Europe, the Orient and Africa.

 

Now, to conclude Peter’s timeline:

 

January 16, 1672 - Colbert reminds Matharel that Puget’s drawings must always be submitted, first, to the construction council, before work can proceed.

 

Sept 13, 1672 - Puget completely disengages and the King decrees that sterns will no longer carry figures in full relief.

 

Between 1672 and his dismissal from Toulon in January of 1679, Puget undertakes several large commissions for marble staruary, for the gardens at Versailles.  Chief among these works are his figures of Milo, Perseus and Andromede.

 

In the next post, I will give Victor Brun’s eyewitness account of the Monarque.

 

To be continued...

We are all works in progress, all of the time.

Link to comment
Share on other sites

It is not clear to me from when this account by Victor Brun dates, but I suppose that it must be from before 1675, when the Monarque’s ornament was reduced.

 

Victor Brun describes the Monarque:

 

”The King in Roman costume, having slaves at his feet, is on his throne between two Renomees [fames], holding the tunes [carrying trumpets] of his glory, they were the upper terms of the painting; other terms, even richer, represented Neptune and Cybele, paying tribute to Louis XIV: three magnificent galleries, supported by caryatids and tritons kissed the rear, and this beautiful tableau was framed by geniuses [winged angels to either side of the great lantern] which rose up to coronation, on the king’s head, and sea horses that seemed to swim in the sea.  The front [bow, presumably] was an allegory representing Vigilance taming the Lion of Spain and Holland.”

 

Mr. Peter notes:

 

”Masterpiece of naval decoration, the Monarque also represented the almost general model of which we will find simpler, less sumptuous variations, in several other drawings of the artist, among others the I’lle de France, the Scepter, the Royal Therese, the Fool, the Deceiver.  Each of these ships shows a surprising wealth of invention, a variety in the choice of the arrangement of ornaments that give Puget’s fecundity the best proof.  All of this was accompanied by statues full of fantasy, satyrs, dolphins, characters in time costumes, symbolic animals, trees, mythological figures, monkeys, masks, garlands” (Marcel Brion).

 

Personally, it seems to me that the Monarque was, perhaps, Puget’s masterpiece, and like the suggestion of six ornamental models that represent the totallity of possibilities - the Monarque was maybe the single ship that embodied the largest sampling of his ouvre.  That might explain why he was so proud of the ship that he created no fewer than two [and maybe three] highly detailed portraits of her.

Edited by Hubac's Historian

We are all works in progress, all of the time.

Link to comment
Share on other sites

Now, with Victor Brun’s description of the Monarque in mind, let’s consider Pierre Arnoul’s [Intendant General of the Marine Levant] exacting description of the Royal Louis.

 

This description is part of a much more expansive cataloging of the Royal louis, that includes measurements of almost everything, detailed descriptions of the interior, as well as the exterior.

 

This original text exists in the GALLICA archives and is titled “Description du Vaisseau Le Royal Louis.”  The title page is inscribed with the date MDCLXXVII: 1677.  This text is also the origin of this primitive drawing, which is essentially what Arnoul is describing:

 

591FB1DC-3E17-434F-8F28-0A0DBC9E9AF9.jpeg.884101a88eb1394cd179bc2dc2dd1ecf.jpeg

Here is the title page:

2B3AD17A-C485-41B0-9BCD-65D5A87D9CE7.thumb.png.cea5284e87055cc5703d9cdfaf51e0cd.png

And here is the point at which Arnoul describes the exterior of the ship:

6BF24CAC-731F-43A0-A0CB-74AA06EC744C.thumb.png.c5bb8ae49e3a6fac777242908343044f.png

Following is my translation.  I have made [notes], where applicable in order to clarify differences in ship nomenclature:

 

“The smooth dourdy [lower transom] is enriched outside laurel leaves with shells seashell on it, all of ore has perfection.

Over there is a marine horse at each coast [side] and four large consoles that support the first baterie [lower stern balcony], above which there is a very beautiful cul de feu lamp [concealing the rudder head and stern post].

 

The first gallery, at the height of support is all dotted with fleurs-de-lys d'oreen [in gold], on which are affixed four sirens that serve as a support for the second gallery, and costez [along the side galleries] three tritons and two consoles with a frieze that runs all around, where are the arms of Monseigneur le Duc de Beaufort, supported also by two tritons holding an anchor with one hand; on the starboard side Neptune and Thetys [Tethys] on the left, with a babe at their feet, present[ing] in the divinity of the riches of the earth and the sea, which they then present to the figure of the king, who is in his throne of justice above the third gallery in relief and gold. as well as the whole stern, with a slave of each side and a cornice of gold which reigns all along the ship [sheer rail all in gold?], with trophies joining the said divinities.

 

On each corner, from above, there is a renomee [fame] each holding a trumpet.

On the second cornice at the coronation, which has the same effect as the other, are two affixed figures holding in their hands a crown of laurel on the head of the King, of one side, and on the other an olive branch.

 

On the third floor [quarter deck level] there is a balcony, two feet high, where the king's arms are in a medal, on which there are four capitals, or four half-bodied figures, all of them representing the four parts of the world.

 

All portals of ports [gunport lids] are adorned with fleurs-de-lis, figures of the King, lyres, and suns.  All between the wales [from the quarter deck level to the sheer railing] there is a frieze in gold which reigns all along the ship, of fleurs-de-lis, also of gold.

 

Between the ports of the second baterie there are trophies of the navy, all of them between lasses of peles [?indescipherable?] and anchors of the same.

Those [ports] of the third gundeck are adorned with a frame of foliage with griffins on the sides, all of gold in perfection.

At the highest wale [beneath the sheer rail at the poop deck level] there are consoles of space in space, with festoons between two, all in gold.

 

The sides of the vessel with smooth are enriched with fleurs-de-lys golden with molures[?].

The whole mirror, in other words, the guardianship of the vessel is blue in color with golden fleur-de-lis [the stern/tafferal, I suppose].

 

THE BOW

 

At the bow of the vessel there are two great escolats[?] two half-wives, whose bottom ends in foliage running along the precients.

All precients [wales] of the bow are the same, with consoles from below the bows and florets gild space to space.

 

The figurehead is a renowne [fame] holding the king's arms, with a little triton underneath, which has it to wear them, all of which is excellent.

The crane carriers [cathead supports] are two big tritons of gold.  At the face of the castle of Prou [beakhead bulkhead] there are two children in low relief of gold who carry one a laurel and the other a palm, are an escort or are the arms of the King. The whole bow is adorned, even the herpes [head rails] of fleur-de-lis and the figures of the King of the Golden Crown in perfection.”

 

Here are what I believe to be the stern drawings for the Royal Louis, from Uber Den Wellen...

 

F8CA0001-41BA-4A4C-9FDB-FB8BA13AFC44.thumb.png.e07d5b73bc2f7715e0f9df755ac50e1c.png

BD3CB5CD-711A-47D3-BABE-90952FEB4B21.thumb.png.7d4f0ac60510366c7784a6e1bdda8877.png

The tableau presented on the tafferal, so far as I can tell, appears identical to the Monarque

679C53E4-DB02-43E5-9AEE-74E95A0CA8E6.thumb.png.78207bc153187228d602c33c96b88072.png

Here is where it gets interesting.  Brun references Cybele, opposite Neptune for the Monarque.  However, Arnoul speaks of Tethys, opposite Neptune.  In Greek Mythology, Cybele is an earth mother/nature goddess, while Tethys is the sea goddess; daughter of Uranus and Gaea, who was married to her brother Oceanus.

 

58937FC8-68B4-47C2-91B9-2A9C9BC5C1A7.jpeg.4999c12475678a4a190246dc51284ef4.jpeg

Here, on the lower stern balcony, can be found the greatest number of differences.

 

First, the armes of Beaufort are clearly present on the lower stern balcony of the RL, but notably absent on the Monarque.

 

The supporting corbels, beneath this gallery are also notably quite different; on the RL, they are notably less robust, and appear to have shell ornaments on the ceiling of the counter, between them.

 

The other notable difference is the absense of the swagged garland below the stern chase ports, on the Monarque; yet, this detail is clearly observed by arnoul on the Royal Louis.

 

487EDD80-93A1-47D4-9A4A-515FDAC83FFA.png

 

The presence of these sea horses appears to be a common thread among the Monarque, the RL and early SR.

 

Here’s the better of the two Monarque portraits for comparison:

 

2C0622C6-1A99-4763-8420-DBFF4FEA010E.thumb.png.39d609cfce323d3d98d6f0402d90f11c.png

So, in summary, I believe that the ornamental scheme for both the Monarque and Royal Louis were so similar as to be nearly identical.  This would not be surprising, if the RL’s first ornament were placed upon the Monarque to, perhaps, satisfy Beaufort.

 

The other striking thing, to me though, is how much the exterior description of the RL mirrors the portrait of the Monarque.  Nevertheless, his band of heraldic ornaments is something that can be found very clearly on a drawing of Le Dauphin Royal [which, if not the original ornamental scheme, may be a revised proposal for reduced ornament]:

 

181961C4-7E26-48F9-8B9E-5E4339DBB260.jpeg.968b5b28b3a82778935fe43e6d5f7d7c.jpeg

The other notable thing is just how much of the RL’s ornament appears to have actually been gilded; perhaps with these earliest flagships of the First Marine, truly no expense was spared!  I’m not sure whether that would still be the case in, 1689, but as I have outlined before - I will make more sparing use of gold to highlight the ornaments, themselves, while using yellow ochre for the mouldings.

 

This is all highly debatable, of course, but these are my theories.

 

Edited by Hubac's Historian

We are all works in progress, all of the time.

Link to comment
Share on other sites

Hi Hubac

Thus is all really interesting and I love all these old drawings, the van de velde ones especially, the way they show the ships so low in the water is also amazing and often wonder how a model could be made to look like that, and with all the amazing decoration that they added at this time

Regards

Paul

 

The clerk of the cheque's yacht of sheerness

Current build HMS Sirius (1797) 1:48 scratch POF from NMM plans

HMS Winchelsea by chuck 1:48

Cutter cheerful by chuck 1:48

Previous builds-

Elidir - Thames steam barge

Cutty Sark-Billings boats

Wasa - billings boats

Among others 😁

 

Link to comment
Share on other sites

Last post for the day.

 

So far, I have had zero success tracking down the two portraits that would help me the most, if I could just get a better image of them.

 

Yesterday, it dawned on me that there may he an APP that could improve digital pixelation, and turns out - THERE IS!!

 

It’s free, and it’s called DPI.  Apparently, the maximum resolution you can achieve is 3,000 DPI.

 

So, I decided to plug these two portraits into the app and see what happens.

 

Before at 72 DPI:

 

E9E50A39-D8C5-43A8-87BF-0FC2750B221B.thumb.jpeg.7d0f125ca56ade74722d0cf01bb99a4c.jpeg

And after at 3,000:

4E9A6125-65B4-4205-8EDE-8B1DB281C170.thumb.jpeg.b785db1f5c977db924c278ba2f64b493.jpeg

On my phone, these do not look really very different at all.  However, I think my phone’s maximum display value is 1080 DPI.  My 11-year old MAC, at home, is probably significantly less.

 

Here is SR after 1689 [also a very low res snap]:

3E9509DA-914F-45B2-A63C-871C5F7335D1.jpeg.f193510944576ab23bbd8848e985f11a.jpeg

Here she is at 3000/1080:

 

E810D99D-54D2-4A5C-B019-8C88C6A8B62B.jpeg.a5b0e605e305357a81a670890f76d83d.jpeg

 

Maybe just a little better.  I wonder what these images would look like on a truly high resolution monitor. If anyone out there has one - please feel free to re-post their screen shots.

 

Enjoy the weekend!

11256FB7-24DE-46DD-818D-5957E998B183.jpeg

We are all works in progress, all of the time.

Link to comment
Share on other sites

Another round of fascinating information. While I know that this is to aid you in both your current and potentially future S.R. builds, you have now peaked my interest in attempting to scratch build the Monarque. I'm still a long way off from starting a new build, but that is probably best as I will need to do a lot of digging and research. I think that attempting to create a model of that ship would not only fit in nicely with my fleet, but would be a worthy challenge. Hmm... lots to think about. 

 

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

Hello Marc, sorry for my late answer but I'm thrown in to completly new part of my job I have never done before.

 

Reading you lines there are some questions I get from several sides of my mind: 

 

Grumpy old mind?

Where/How do you note the scubber one way part - not forgetting to add it to the SR later on? (I'm entering the last 1/3 of my lifetime knowing to use the map of remembering more as a scetch). I get realy grumpy forgetting some part to install I allready decided to bring it in - finding it on my brench after closing the hull. (Okay it is better than me 18 years ago , awaking after midnight and suddenly remembering that the missing half of the  supper's strawberry jam bread is resting in the enclosed hull!)

 

The one and the same?

The knowledge about the  snobism and consite of this epoche makes it realy hard to belife in a 3D copy&pace of the ornamentation on a 1ene rang ship. Taking the figures to store them untill the rebuilt and relocate them in the same arrangement. This seems to be a very cheese-paring idea for such a lavish and wastfull time - in particular when dealing with the crowns very naval icon. I can not proof it - it is just a feeling: What about the solution, that the ROYAL LOUIS and MONARQUE was one and the same ship - renamed after some refitting? Several ships were renamed in the French navy - there must not have been a cutting down rebuilt to the false keel. (btw. This seems to be an  error in designation in the SPplans.) 

 

Antedated feature?

As we were with the SPplans (mine have arrived last week)...

😵What about the real false keel in this drawing you have shown? I was not able to identify it UNDER the keel as a seperated board protecting the keel from Australian damage* .Was there no false keel on French baroque ships? When the false keels was introduced to the Marine Royal?

And so let me ask the question: Do we antedate a used-to-see feature on a baroque ship that would not be there untill later years? Do we implemantate a very usefull  later invention on an earlyer ship not having it?Do we do so due to our viewing habits trained to us by the Georgian RN?

 

I know, Marc, I may now not be any longer everybody's darling by asking this questions.  But I think we both want to get the most out of our expensive plastic kits. So please don't take these qualms/doubts as any inpoliteness or rudeness. (In particular as my building foam is still wet and I didn't stepped foreward a single toe till christmas.)

 

It is a great benefit to read in here and taking part on your mindfull and skilled thoughts. Thanks a lot!!!

 

 

_______

* Damage from down under.

IMG-20180527-WA0039.jpg

Edited by Heinrich der Seefahrer
Adding something cute and friendly - picture.

"Let's add every day 1/2 hour of

modelship building to our

projects' progress..."

 

 

Take care!

Christian Heinrich

OverTheWaves.jpg.534bd9a459123becf821c603b550c99e.jpg

simple, true and inpretentious motto of ROYAL LOUIS, 1668

Sunking's mediter. flagship most decorated ocean-going ship 

 

Ships on build:

SAINT PHILIPPE, 1693: 

1st rang French 90-gun ship - Lavente flagship (based on Heller SR - 1/92 & scratch in 1/64) 

TONNANT, 1693: 

1st rang French 90-gun ship - sister of SAINT PHILIPPE (mock-up/test-object for S.P. - scratch in 1/64) 

 

Projects in planing:

L'AURORE, 1766:

French Pleasure Corvette (after Ancre plans - scatch in 1/64)

Some Spantaneous Short Term Projects

 

Link to comment
Share on other sites

15 hours ago, EJ_L said:

Another round of fascinating information. While I know that this is to aid you in both your current and potentially future S.R. builds, you have now peaked my interest in attempting to scratch build the Monarque. I'm still a long way off from starting a new build, but that is probably best as I will need to do a lot of digging and research. I think that attempting to create a model of that ship would not only fit in nicely with my fleet, but would be a worthy challenge. Hmm... lots to think about. 

 

Dear EJ_L!

That sounds well. Also it might be a helpful idea to you to prebuildt the scratch model by using the Heller SR in particular to proof the transoms figurefull decoration. Tamiya plastic soldiers are much cheaper than boxwood...

I am dealing with this invention for my figurehead.

 

Hth, 

 

Edited by Heinrich der Seefahrer
Resizing my bad English

"Let's add every day 1/2 hour of

modelship building to our

projects' progress..."

 

 

Take care!

Christian Heinrich

OverTheWaves.jpg.534bd9a459123becf821c603b550c99e.jpg

simple, true and inpretentious motto of ROYAL LOUIS, 1668

Sunking's mediter. flagship most decorated ocean-going ship 

 

Ships on build:

SAINT PHILIPPE, 1693: 

1st rang French 90-gun ship - Lavente flagship (based on Heller SR - 1/92 & scratch in 1/64) 

TONNANT, 1693: 

1st rang French 90-gun ship - sister of SAINT PHILIPPE (mock-up/test-object for S.P. - scratch in 1/64) 

 

Projects in planing:

L'AURORE, 1766:

French Pleasure Corvette (after Ancre plans - scatch in 1/64)

Some Spantaneous Short Term Projects

 

Link to comment
Share on other sites


 
Quote

Hello, Chapman! That is awesome news about La Reine.  Are you doing a complete scratch-build, and will there be a build-log for the project?

 

 I believe that the Heller kit of Phenix after extension, widening and a new bow and bulwarks, built as a waterline
model, could correspond to the appearance of the v.d.Velde illustrations.
That's what I want to prove, and then it's decided if the model has a future
Link to comment
Share on other sites

Well, today was a bitter/sweet day.   After 37 years together, it was finally time to part ways with SR1.  Santa gave me her for Christmas, when I was eight, and I worked on her off and on (mostly off in the teen years) for the next 16 years.  And I’ve been moving her around with me from one New York apartment to the next, ever since. However, there can’t be two Soleil Royals at the next (smaller) apartment in Brooklyn, so today SR1 set sail for her new home in Westchester.

 

8DA14014-43BE-492D-90CE-B1355394FE06.thumb.jpeg.a25f955344e053b31018c165ef7a335b.jpeg

DF9506AC-7ED7-4C5E-8576-D15A7966A0C7.thumb.jpeg.a380418bf17059186a879cddc3c4b17f.jpeg

My childhood buddy, Brian, always liked the model, and always joked that it’d be welcome in his home.  So, now it is.  Bon voyage, mon ami!  Brian will take good care of you.

 

My father reminded me, tonight, that the base and case for this model were made by the man who did all the model case work for the New York Yacht Club (in the roaring 90’s).  The case is plexi, but the base is a nice sapele veneered plinth that looks as good  today as it did 21 years ago.  Although he is long retired, my father had interesting friends in all corners of New York.

 

And now, Heinrich, I would like to say that I have to agree with your assessment that it does seem a “cheese-paring” exercise to essentially re-cycle ornamental allegories in this particular age of excess.  And, yet, that does appear to be exactly what the French did with quite a number of the great first rates.

 

Consider that the tafferal tableau for Le Royal Louis 1668, is remarkably similar to the conceptual Louis XIV model of 1693[?].

 

FBACA9C6-614B-47D5-8891-29BFCEBC5C2F.thumb.png.303692edd0014226b0b9eb8a2df6f4d3.png

7C9CEE71-1606-43EE-956B-ED3C09715817.thumb.png.f323ac1bfb493953553ca7dd30509c54.png

This is why I think there is plausibility to the theory that some of SR1’s original ornament was preserved and re-incorporated into Etienne Hubac’s re-construction of his father’s great ship.  In fact, the French loved Berain’s adaptation of the original LeBrun/Puget allegory so much, that they re-created it almost exactly for SR2, in 1693.  The quarter galleries change, and the upper bulwark frieze becomes significantly more restrained, but the ornamental elements have their origin in earlier designs.

 

Moving onto the question of the scuppers.  Initially, I had placed my scuppers at the lowest run of the sheer of wales, where structurally, they would intersect with the deck line.  I spaced them evenly, on my drawing, without considering the port lids.

 

When the St. Philippe monographie came, this comparison shot brought to my attention the fact that my scuppers were maybe positioned incorrectly, and that there should also be wider scuppers, in line with the pumps:

 

F32ECE08-A5D6-4285-9744-196D019A96DF.thumb.jpeg.45730fffaaf4e93f34c7864f62053378.jpeg

The next picture of the St. Philippe illustrates the scuppers relative projection beyond the wales.  Mine project, too, but not quite this far.  Anyway, it seemed clearer to me that any projection would still be an impingement to the lid and/or the function of the scuppers:

 

AF43AD17-A6EF-4AA4-885F-9083C149670D.thumb.jpeg.23e8ea909a2c667790a562b655916adc.jpeg

 

Lastly, with regard to the Monarque/Royal Louis debate - I have read through enough source material to feel confident that these were two distinct ships, each with their own service history.  Consider Winfield and Robert’s synopses of the two ships:

 

FBD81890-4640-4E74-9E1A-E23E81515A5F.thumb.jpeg.ffdafb7a9a964379e64c815b88941e45.jpeg

732E8898-8867-4551-B1D1-3A50F63F25F4.thumb.jpeg.32e9baf1dde4e54010e85028d7fc0104.jpeg

503398D9-2301-4219-80C7-585088976937.thumb.jpeg.e92af7cc67e9ced1ebe900f597ecb3ac.jpeg

I would be happy to mail you, or anyone else that is interested, the full translation of Peter’s Puget et la Marine.  It is clear, there, that work on both ships is happening simultaneously.  Just P’M me and I’ll send it along.

 

Chapman, I’m excited for your model of La Reine, and I hope that you will find the Pheonix kit suitable.

 

Bon soir, mes amis.

AD9E3BFE-0FA7-471D-9677-4848B3AE8DA0.png

Edited by Hubac's Historian

We are all works in progress, all of the time.

Link to comment
Share on other sites

Well, today was a bitter/sweet day.   After 37 years together, it was finally time to part ways with SR1.  Santa gave me her for Christmas, when I was eight, and I worked on her off and on (mostly off in the teen years) for the next 16 years.  And I’ve been moving her around with me from one New York apartment to the next, ever since. However, there can’t be two Soleil Royals at the next (smaller) apartment in Brooklyn, so today SR1 set sail for her new home in Westchester.

 

8DA14014-43BE-492D-90CE-B1355394FE06.thumb.jpeg.a25f955344e053b31018c165ef7a335b.jpeg

DF9506AC-7ED7-4C5E-8576-D15A7966A0C7.thumb.jpeg.a380418bf17059186a879cddc3c4b17f.jpeg

My childhood buddy, Brian, always liked the model, and always joked that it’d be welcome in his home.  So, now it is.  Bon voyage, mon ami!  Brian will take good care of you.

 

My father reminded me, tonight, that the base and case for this model were made by the man who did all the model case work for the New York Yacht Club (in the roaring 90’s).  The case is plexi, but the base is a nice sapele veneered plinth that looks as good  today as it did 21 years ago.  Although he is long retired, my father had interesting friends in all corners of New York.

 

And now, Heinrich, I would like to say that I have to agree with your assessment that it does seem a “cheese-paring” exercise to essentially re-cycle ornamental allegories in this particular age of excess.  And, yet, that does appear to be exactly what the French did with quite a number of the great first rates.

 

Consider that the tafferal tableau for Le Royal Louis 1668, is remarkably similar to the conceptual Louis XIV model of 1693[?].

 

FBACA9C6-614B-47D5-8891-29BFCEBC5C2F.thumb.png.303692edd0014226b0b9eb8a2df6f4d3.png

7C9CEE71-1606-43EE-956B-ED3C09715817.thumb.png.f323ac1bfb493953553ca7dd30509c54.png

This is why I think there is plausibility to the theory that some of SR1’s original ornament was preserved and re-incorporated into Etienne Hubac’s re-construction of his father’s great ship.  In fact, the French loved Berain’s adaptation of the original LeBrun/Puget allegory so much, that they re-created it almost exactly for SR2, in 1693.  The quarter galleries change, and the upper bulwark frieze becomes significantly more restrained, but the ornamental elements have their origin in earlier designs.

 

Moving onto the question of the scuppers.  Initially, I had placed my scuppers at the lowest run of the sheer of wales, where structurally, they would intersect with the deck line.  I spaced them evenly, on my drawing, without considering the port lids.

 

When the St. Philippe monographie came, this comparison shot brought to my attention the fact that my scuppers were maybe positioned incorrectly, and that there should also be wider scuppers, in line with the pumps:

 

F32ECE08-A5D6-4285-9744-196D019A96DF.thumb.jpeg.45730fffaaf4e93f34c7864f62053378.jpeg

The next picture of the St. Philippe illustrates the scuppers relative projection beyond the wales.  Mine project, too, but not quite as much as these.  In any case, it seemed counter-productive for there to be any impingement of the lid or impairment to the function of the scuppers

 

C08236C1-11AB-49C7-9447-4E5C6F6B4E32.thumb.jpeg.21beb89301336c4d81604ea0468a636d.jpeg

As for the Monarque/Royal Louis debate, I’ve read enough source material to feel pretty confident that these were two distinct ships.  Consider the synopses of Winfield and Roberts:

 

F0B9DB65-5BEC-43F5-93F0-CFC5D707C247.thumb.jpeg.c64b90299e5e53f1cede374a741fee8b.jpeg

9D09C85E-5B68-4E81-9796-7908CE74D81A.thumb.jpeg.adf2698a38c7d013f09d55fc39de89ec.jpeg

F9025619-8B14-451B-9879-01E1DD1E0815.thumb.jpeg.c33692d3b1e76bd102ad5c3992b93096.jpeg

Peter’s book, Puget et la Marine makes it pretty clear that work was happening on these two ships simultaneously.  If anyone is interested, I would be happy to mail the full translation of Part 1.  Just P’M me, and I’ll send it along.

 

Chapman, I hope you will find that the Pheonix kit is suitable for your model - that would be an exciting project, indeed!

 

Bon soir, mes amis!

Edited by Hubac's Historian

We are all works in progress, all of the time.

Link to comment
Share on other sites

On 1/31/2019 at 1:12 PM, Hubac's Historian said:

Tthe Monarque, at this earliest stage of her career, under command of Beaufort, and before her forecastle is cut down.

 

Why the presence of her forecastle “hinders navigation,” as noted by others - and must be removed - I can not say.  Frankly, that part of the narrative makes no sense to me.

 

Interesting bit here (as are the rest of what you're thinking and finding).  One thing that struck me was that considering the era, I'm wondering if the forecastle was too high (to limit visibility from the poop deck by the officers?  Or perhaps it was a balance problem and the bow was too low in the water?    Just musing out loud as it were.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Hi Mark!

 

You know, it’s really confusing to me.  The port broadside drawing of the Monarque has the foresail set, which partially covers the view of the forecastle, but it doesn’t seem outrageously high.  Added to that fact is that there isn’t any artillery on that deck, and that’s where real weight would come into play.  It isn’t as though she was a carrack, and I have no idea how those things remained upright on their keel.

 

The one thing that can be said of the Monarque is that she had an especially high stern; the tafferal of this ship would have been something like 35 feet above the water!  And all of that loaded with massive sculptural statuary - albeit “dug from within” to reduce weight, but it would seem more likely that the navigation problems with the Monarque owed more to her stern.

 

The trouble is that I find the Winfield and Roberts book to be a particularly insightful and reliable source, so I have to assume that they know what they’re talking about, even if I do not understand it.

Edited by Hubac's Historian

We are all works in progress, all of the time.

Link to comment
Share on other sites

On recycling the ornamentation, it would not surprise me in the least that this was done. While the crown was notorious for spending vast amounts of money on the first rates, the reality of wood demands would have made the practice of recycling very practical. In addition to the wood shortages, time was always valuable. If statues could be freshened up and reused with little modifications, I believe that the builders of the day would have done so. When you consider that they were either the same carvers, descendants of the original carvers or trying to emulate the originals, why not use the originals as much as possible?

 

From what I have been reading, (by the way, I'm loving the Winfield & Roberts book) I would have to agree that Monarque and S.R. were two distinct ships as well. As there are separate and distinct career histories of each, I would be inclined to believe in the existence of both. While it is true that ships were renamed either through rebuilding or capture, generally speaking, from what I have seen first rates hardly fell into these options. As they were typically flag ships, they kept their names through rebuilding or passed them along to an entirely new ship when their service was over in order to continue to honor of that name. I also have seen that most first rates ended their service by either being broke up or destroyed in battle. Rare that one of these were captured. 

 

Marc, probably a smart decision to move the scuppers. I never thought of their position either until you mentioned it. The scuppers do tend to be an overlooked component on many models. I know I am guilty of it. Just another item to fit on an already crowded hull. I have to give lots of credit to the builders in finding ways to fit all of these items and still maintain structural integrity. The more I have read about the engineering that went in to these ships, the more amazing they become. Especially considering the era in which they were built.

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

Hy Marc,

 

I.

I do think the scuppers should be positionated as logical as possible... 

Any deck needs them - as any deck suffers minimally rain - , and also the pumps water has to be brought out of the deck. So your view on the avoiding of a reflooding a deck from the deck above through a gunport is a wounderfull idea of a great historical and navalarchitectural mindset. 

My question is always binary: "Is this construction an arrangement of selected elements that will work together in a way to make their job in a proper way (functionality proofed)? ...and:

 

Were all the elements to hand/invented when it was built (historical correctness)?

 

By this pair of questions positively answered a good looking reconstruction is always possible I guess.

 

II.

The recycling theory looked proofed, the seperated two ship theory, too. 

 

So you can step foreward with a good feeling. That is great.

 

III. It is always a great pitty to leave a beloved object - but it isn't smashed (like my kits were) there is just place for the new edition of the SR. Drzy your tears and set sauils towards the most anybody can get out of this old-aged Heller kit. 

 

 

"Let's add every day 1/2 hour of

modelship building to our

projects' progress..."

 

 

Take care!

Christian Heinrich

OverTheWaves.jpg.534bd9a459123becf821c603b550c99e.jpg

simple, true and inpretentious motto of ROYAL LOUIS, 1668

Sunking's mediter. flagship most decorated ocean-going ship 

 

Ships on build:

SAINT PHILIPPE, 1693: 

1st rang French 90-gun ship - Lavente flagship (based on Heller SR - 1/92 & scratch in 1/64) 

TONNANT, 1693: 

1st rang French 90-gun ship - sister of SAINT PHILIPPE (mock-up/test-object for S.P. - scratch in 1/64) 

 

Projects in planing:

L'AURORE, 1766:

French Pleasure Corvette (after Ancre plans - scatch in 1/64)

Some Spantaneous Short Term Projects

 

Link to comment
Share on other sites

On 2/3/2019 at 7:56 AM, mtaylor said:

Interesting bit here (as are the rest of what you're thinking and finding).  One thing that struck me was that considering the era, I'm wondering if the forecastle was too high (to limit visibility from the poop deck by the officers?  Or perhaps it was a balance problem and the bow was too low in the water?    Just musing out loud as it were.

Rickenbacher writes in his notes that by weight reduction, by removing the back, the 
maneuverability should be increased.I guess, the Monarque, was probably during the Candia Mission 
with the bow too deep in the water. That would have had an influence on maneuverability.The ship is 
difficult to tack through the wind and dives deeper into the sea/waves.

 

Edit:Maybe the back deck was not completely removed, and only the cannons and the bulwark were 
removed?

After dismantling the back, the Ship had instead of the 94, now only 84 guns.

Edited by Chapman
Link to comment
Share on other sites

You, know - I’m a dope!  There’s a reason Winfield and Roberts is such a good source - perhaps I should read it a little more closely, from here on out!  Especially, the passages I caption in this particular thread!!

 

They explain, just above, that the Monarque’s forecastle was initially intended to be armed, and that it was, in fact, armed.

 

Take away those six forecastle guns, the deck itself, and four more from the quarterdeck - done deal; reduced weight, better balance and navigation.

 

All this time, I’ve been laboring under the certain “knowledge” that ONLY Soleil Royal and Royal Louis were graced with armed forecastle decks - so even though W&R explain it, and my own eyes read the passage [several times, honestly] it did not register.

 

So, mystery solved.  Through reading, and the help of my MSW friends.  Did I mention I’m a dope? Sometimes, really, it’s embarrassing.

 

And yes, Heinrich, from here on out I will set sail with dry eyes, vision corrected and with a good reading light, as I attempt to resurrect Soleil Royal from the catacombs.

Edited by Hubac's Historian

We are all works in progress, all of the time.

Link to comment
Share on other sites

I think we all feel that way from time to time on here. :)

 

I had been confused myself on that issue as I found it strange for the Monarque not to have been armed or planned for arming of the forecastle. By this point in the 17th century, many vessels had been armed that way, even if they were only small guns. For a ship of her rating not to have had guns on the forecastle seemed a bit odd to me.

 

We are also hampered by "snapshots" of history. A painting here, a passage there. Combine these with general knowledge of practices and designs and we can recreate reasonable assumptions. The more famous a ship, the easier it is as there is simply more "snapshots" to put together to make the image. This is harder to do on vessels of lesser fame. Even when we have the actual ship to look at, touch and examine, example Vasa, we still get things wrong. 

 

 

 

 

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

I totally agree, EJ!

 

Adding to the confusion, in this case, is that the Monarque portraits show her with a forcastle deck, but it is not armed.  But, then, the deck and it’s guns were removed in 1670, immediately after the Candia mission.  So at exactly what point in the brief timeframe between launching and revision that these portraits represent - I cannot say.

 

We are all works in progress, all of the time.

Link to comment
Share on other sites

It has been my style to document every little step forward, and I will not change course now.

 

I primed the shells tonight, and it is quite gratifying to see all the detail and different color plastics coalesce into one thing.

 

The bow and stern extensions have blended-in smoothly.  The iron work is prominent enough to notice, but not so much that it’s distracting.  Painting is going to be FUN!

 

3BA3CB85-9927-488D-8983-DB481336B382.thumb.jpeg.688e9835eabe15aa1ebb65415ef4fdb1.jpeg

CA523572-A924-4ED5-AC0B-53DE21746AA4.thumb.jpeg.15f04ab4b4d447bcb394239319a67713.jpeg

93870DD3-1E4A-4752-9571-F98FF6B3CD42.thumb.jpeg.a8bcf11d10d817d32cec6b6e608e8620.jpeg

943C8CFA-FC0E-4C22-BDFF-E0AE2543BA6C.thumb.jpeg.4c7847063575ca4424ba7d1183a3ccf2.jpeg

C9494648-053D-490A-AC67-E8527D21523E.thumb.jpeg.60bb9dd18a714bcfba8ade8e199d1260.jpeg

62F80E96-51C6-4750-820F-2E92BB6891B5.thumb.jpeg.e3be360df326e1b0a2d370db1696345f.jpeg

Edited by Hubac's Historian

We are all works in progress, all of the time.

Link to comment
Share on other sites

That primer coat does a lot in making her look less like Frankenstein's monster and more like the proud 1st rate she is. :) 

 

Have you primed the upper bulwarks as well? 

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

Haha, thanks EJ!

 

No, I still have ornamental work to do on the upper bulwarks, which I’m not yet sure how it will be attached; the amortisement of the QGs, the mermaid figures, etc.  Those parts can wait, for now.

 

In fact, I messed up a little because I meant to mask a section, on the lower hull, for the lower section of the QG - which I also am not sure how I will make and how it will attach to the hull.

 

No biggie, though;  I’m a pro at scraping plastic, at this point.

We are all works in progress, all of the time.

Link to comment
Share on other sites

Looks great.

Enjoy the Stella Artois, you've earned it.

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Hi Marc - 

 

Looking really good, like a warship should.

I am a bit behind in following this.  My system has been marking your posts as spam for the past several weeks, and I just caught it.

Will stay on top of it more in the future.

 

See you soon.

 

Dan

 

Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser

 

Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS OneidaSwan 42 racing yacht  Queen Anne's Revenge (1710) SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914),  James B Colgate (1892),  POW bone model (circa 1800) restoration

 

Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas

 

"Take big bites.  Moderation is for monks."  Robert A. Heinlein

 

 

Link to comment
Share on other sites

Weathering and distress effects coming to life:

2C176F95-BBEC-4883-A687-FA22B2495279.thumb.jpeg.cc441fbe8246efb1ca3c5a15e2f4237c.jpeg

19306608-BBA3-4870-848E-9201B0D6D8EC.thumb.jpeg.8249cd83d116ceb806c3f9fb12169e69.jpeg

The scratch pattern is more regular and subtle than my paint samples.  These artist’s acrylics, though, are really tricky to work with.  I found that you have to water the paint down, and apply multiple thin coats; four complete coats, and another spot coating to get even color saturation.

 

The coarse dry-brushing - after the bulk of the Van Dyke Brown oil paint has been wiped away - leaves a nice patina on the surface that evens out the weathering, IMO.

We are all works in progress, all of the time.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...