Jump to content

HMS Beagle 1820 by Mike 41 - 1:48 scale - Cherokee-class brig-sloop


Recommended Posts

The HMS Beagle served as Charles Darwin's floating laboratory on his historic voyage to the Galapagos Islands.
 

Drawings:

I traced the drawings I needed to generate the modeling plans from the book Anatomy of the ship HMS Beagle using AutoCAD.

 

The Keel Assemble

 

 

The Keel Assembly is 24 ½” long x ¼” thick European Beachwood. Since this is going to be a Navy Board type model I simplified the keel and framing.

 

This set of photos shows the keel assembly and the first two frames. All the frames are double and consist of ten individual sections each.

post-950-0-83039300-1480170797.jpg

post-950-0-88521400-1480170809.jpg

post-950-0-74977100-1480170818.jpg

post-950-0-33816300-1480170825.jpg

post-950-0-66101900-1480170840.jpg

Link to comment
Share on other sites

The frames have all been cut out and fitted to the keel. This is a few photos showing the frames and building board.

 

The gantry style building board I am using has been through several previous builds and is holding up well. A description of the board is posted under Jigs & Things as ‘Building Board Gantry Type’ and explains why I like to use it. http://modelshipbuilder.com/e107_plugins/forum/forum_viewtopic.php?5571

 

I am currently working on the stern framing after than is in place the bow framing is next I have found it is easier for me start on the ends and work towards the middle of the model.

post-950-0-66995100-1480175853.jpg

post-950-0-60635900-1480175862.jpg

post-950-0-50307500-1480175871.jpg

post-950-0-26074100-1480175882.jpg

post-950-0-10945800-1480175899.jpg

post-950-0-67181200-1480175910.jpg

post-950-0-63171100-1480175930.jpg

post-950-0-79400800-1480175942.jpg

Link to comment
Share on other sites

This is a few progress photos of the stern framing. The first photo shows the addition of the poop deck transom.

 

The stern has a 1/32” thick solid Beachwood core that will be planked on both sides I added a photo of my thickness sander it does a great job on very thin material.

 

The next set of photos shows my Folgers sheet bender with the wife’s hair dryer for the heat supply. It is faster than bending the wood wet and waiting for it to dry out. Many other people have been using this system it was not an original thought.

 

The next photos show the lower transoms and stern being installed on the keel assembly.

 

After the timbers on the outer stern timber are installed and the transoms below the wing transom I will start the Knightheads and Hawse pieces.

 

Any comments or questions are welcome.

post-950-0-52380300-1480370619.jpg

post-950-0-00499300-1480370636.jpg

post-950-0-70261300-1480370651.jpg

post-950-0-65544900-1480370669.jpg

post-950-0-46399500-1480370680.jpg

post-950-0-83260200-1480370687.jpg

post-950-0-87207200-1480370694.jpg

post-950-0-68310700-1480370703.jpg

post-950-0-56720800-1480370711.jpg

post-950-0-31903800-1480370723.jpg

post-950-0-49905600-1480370731.jpg

post-950-0-89419900-1480370740.jpg

post-950-0-21765600-1480370750.jpg

post-950-0-62937200-1480370757.jpg

post-950-0-60460200-1480370769.jpg

post-950-0-16166200-1480370777.jpg

post-950-0-37066300-1480370784.jpg

Link to comment
Share on other sites

Looks like a great start Mike, any particular reason you chose Beech wood?

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

The bow framing started with the installation of the most forward frame ‘O’. I generated patterns for the Hawse pieces from the existing drawings after the pieces were cut out I glued them to the frame bread and butter style. I trimmed the timbers to the proper height and sanded the interior and exterior smooth. The last step was to drill the hawse holes.

 

I will be adding the rest of the frames and Keelson next. Thanks for the likes and comments. 

post-950-0-10588500-1480534993.jpg

post-950-0-21860400-1480535000.jpg

post-950-0-01642400-1480535072.jpg

post-950-0-99829500-1480535078.jpg

post-950-0-51723200-1480535091.jpg

post-950-0-47013300-1480535112.jpg

post-950-0-82622500-1480535158.jpg

post-950-0-63660400-1480535178.jpg

post-950-0-25520300-1480535196.jpg

post-950-0-64079500-1480535210.jpg

post-950-0-32348300-1480535222.jpg

post-950-0-41154300-1480535245.jpg

post-950-0-35202800-1480535254.jpg

post-950-0-72357000-1480535267.jpg

post-950-0-62101800-1480535285.jpg

post-950-0-73820500-1480535299.jpg

post-950-0-72511100-1480535312.jpg

post-950-0-77710600-1480535324.jpg

post-950-0-91935900-1480535343.jpg

post-950-0-49468900-1480535353.jpg

Link to comment
Share on other sites

Interesting, Mike.  Not cant frames but built in the French manner.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Hi Mark,

 

I actually did draw a set of plans for the Beagle in the English framing style but didn’t think I would live long enough to build her.

 

Mike

post-950-0-32667700-1480634143_thumb.jpg

Link to comment
Share on other sites

All the frames and the keelson went together without any problems.

 

 

I will be adding the breast hooks and deck hook next. The only place they are shown in the drawings is an elevation view of the keel and stem assembly so the patterns will be fun to make.

 

This is a few photos of the frames and keelson being installed.

post-950-0-33028400-1480634332.jpg

post-950-0-57794400-1480634340.jpg

post-950-0-96661900-1480634351.jpg

post-950-0-62992700-1480634364.jpg

post-950-0-64982400-1480634382.jpg

post-950-0-80934300-1480634396.jpg

Link to comment
Share on other sites

Just found your great build Mike, lovely what you've done so far.  Definitely want to see how you move forward with this.

Cheers,
 
Jason


"Which it will be ready when it is ready!"
 
In the shipyard:

HMS Jason (c.1794: Artois Class 38 gun frigate)

Queen Anne Royal Barge (c.1700)

Finished:

HMS Snake (c.1797: Cruizer Class, ship rigged sloop)

Link to comment
Share on other sites

Thanks Gary and John,

 

This should be an interesting project. The Beagle is a lot more complex than the Galley Washington I will be simplifying a lot of the joinery my old eyes are not what they use to be. Lol

 

Mike  

Link to comment
Share on other sites

I installed the sheer strake top side planks and trimmed the frames to the proper height. This set of photos shows the addition of the upper and lower deck clamps.

post-950-0-19309900-1481470263.jpg

post-950-0-23476000-1481470276.jpg

post-950-0-79266500-1481470286.jpg

post-950-0-02379700-1481470295.jpg

Link to comment
Share on other sites

This set of photos shows an access platform below the lower deck which have two ladders and the shot locker. All the lower deck framing is in place. I’ll be working on the deck items next.

post-950-0-10330600-1481670591.jpg

post-950-0-53224900-1481670608.jpg

post-950-0-23338600-1481670643.jpg

post-950-0-70101700-1481670653.jpg

post-950-0-52650100-1481670662.jpg

post-950-0-23017400-1481670681.jpg

post-950-0-60584600-1481670696.jpg

post-950-0-31235800-1481670707.jpg

Link to comment
Share on other sites

  • 2 months later...

After spending three months in Myrtle Beach SC visiting my daughter and grandchildren it is good to get back home to do a little work on the Beagle.

 

The lower deck has a series of floor hatches to access the hold and items below the deck. I used walnut for the covers. The deck planking will be basswood and installed next.

IMG_5992.JPG

IMG_5993.JPG

IMG_5994.JPG

IMG_5995.JPG

IMG_5997.JPG

IMG_5998.JPG

IMG_5999.JPG

Link to comment
Share on other sites

Thanks John.

Hi giampieroricci,

I agree the strakes are uneven if I had used my original layout I would not have had this problem, it will be corrected soon. Thanks for your comment.

Mike

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...