Jump to content

Sirene 1775 by Roadking (Vincent) - Corel - Scale 1:75 - French Frigate - First wooden ship build


Recommended Posts

This is my first attempt at model ship building. I purchased the kit about 5 years ago and after about 2 months could not find the time to continue so I put her down. I am now recently retired and looking forward to completing it.

 

She's a beautiful ship, however since this is my first attempt I am not looking for museum quality by any means. That will become obvious when I post my photos. I am hoping that when I have completed it it looks nice enough to display in my home. My friends will think it's nice because they won't know any better anyway.  ;)

 

I appreciate any and all help, ideas, suggestions and constructive criticism. I will not be offended and i am here to learn. If you are willing to spend a bit of your time to help me I'd be a fool to not thank you.

 

I will try to correct major errors that may be identified. Some minor mistakes might stay and i will know better for next time. Since I am well into the project it might be too late to fix some anyway.

 

Thank you in advance for your help and encouragement.

 

Vincent

:cheers:

Link to comment
Share on other sites

This is what I am up to at this point. Trick part is getting the hull planking to follow the correct lines. This same kit was posted here on this site a couple of years ago but I do not see any finished photos and the kit illustrations are not too helpful. 

 

post-27575-0-96801500-1483980892_thumb.jpg

post-27575-0-59512700-1483980899_thumb.jpg

Link to comment
Share on other sites

I have found it is easier to work with shorter pieces of wood, rather than trying to get one piece to work for the entire length. If you think about scale, the full-size ship would never use one plank for the entire width. At 1/50 scale, a ten-inch plank from your kit would equal about 42 feet in the real world. Shorter pieces are easier to fit, and far more forgiving. I have used the long boards in the past and had the same problems. Just a thought. :)

Link to comment
Share on other sites

Thank you Maturin52. I never thought of it that way but you have a great point. I actually thought it was not good practice to use short pieces, hence my struggle. That tip should certainly help with the remainder of the hull.

 

I also just learned the correct way to use the heat tool for plank bending. I had the tool but was using it incorrectly all along. Since I learned how to use it, plank bending is a breeze. I will post the video as it may help another newcomer. 

Link to comment
Share on other sites

I've tried dry heat bending, soaked strips then heat gun, and plank bender (head soldering iron with a big head).  So far I've found the plank bender has been my friend! I haven't tried maturin52's approach yet. I'm going to revisit all the techniques as I move along before I settle into the one that works best for me. 

 

Doug

Doug

Current BuildsBluenose II - AKrabbenkutter / Prince de Neufchatel / Essex Cross-section / Syren / Barque Stefano / Winchelsea / Half Hull / Maria HF31 - Dusek / Bandirma - Turkmodel

On the Shelf: Santisima Trinidad and Cross Section / HMS Cutter Alert / Tender AVOS / Confederacy

Suspended Build: Bluenose II - Billing Boats Nr 600 

Link to comment
Share on other sites

The Admiral (my lovely wife) just got me a plank-bender for Christmas. I love it, it's my new best friend - or wil be when I start my next build. HMS Bounty is almost finished - a year and a half in!. Knowing I am considering USS Constitution next, she also got me the Anatomy of the Ship Series edition of the USS Constitution. I guess she's either supportive, or an enabler, depending on your point of view.

Link to comment
Share on other sites

You are off to a good start on your first build. Keep going and you will have yourself a nice model when done and gained a lot of skills for the next!

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

I guess the repairs come down to how much work do you want to put in and what do you want the end result to be? The easiest and fastest way is to simply split the space with two planks and fill it in. It will not be technically correct but it will fill the gap. The other way unfortunately would be to remove all the planking below the whoops and resuming planking from the remaining plank down to the keel. This will provide you with a much nicer finish in the end though it may cost you some replacement planks and will teach you an extremely valuable skill that you will use a lot while building model ships: the art of rebuilding! :P  

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

Yea. I know my build will not be technically correct anyway so I think filling it in is my option. I noticed in your log that special attention was payed to lanterns and cannons and some mentioned alternates for the items provided by the kit. In my case I will be using the kit items. I wouldn't know the correct details anyway.

I'm enjoying the challenge of building and feel somewhat confident that my finished ship will look good to the average observer.

Link to comment
Share on other sites

You will have a great looking model and you are right, the vast majority of your viewers won't know the difference. First models are learning experiences. My first wooden ship is full of imperfections and quite honestly some horrible things. Still, she sits proudly in her case in my living room. I like to see where I started and have always said that as long as you are improving from build to build you are growing and learning.

 

This hobby is as much about the journey as the finished product. Keep up the good work you are doing!

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

Making progress. 

  • Cannons are not glued down yet. I just put them in place to see how they look. I may put on the block & tackle (not sure if that's what it's called) on the cannons that will show.
  • Next step is to put on the upper deck, which will pretty much cover most of the lower deck shown here.
  • I also tried to "weather" the lower decking because it looked too clean, like brand new wood, and not very authentic in my opinion.
  • I put it on the stand that came with the kit. The flay stand plate was badly warped. I thought I had it fixed but over time it warped again. I'll figure out later what to do about it but in the meantime I can use it to work on the model.
  • The instructions kept referring to "Table 2" but there was no table 2 in the kit, so I sent a note to Corel. They answered the same day and said they were mailing it to me. Great service! I was very impressed. Not sure how long it take to get here (USA) from Italy but I'm hoping that when I receive it I "guessed" correctly when I got to those points. 
  • As always, if anyone has a suggestion for improvement or constructive criticism it is always appreciated. My first build and still learning.  :)

post-27575-0-05240800-1485207295_thumb.jpg

post-27575-0-07737000-1485207305_thumb.jpg

post-27575-0-51571800-1485207316_thumb.jpg

Link to comment
Share on other sites

Very nice looking. I usually only fully rig the canons that are visible myself. The others I might fake a few lines like the breech rope so that when viewed through the port "rigging" can be glimpsed. 

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

You gave me an idea. With today's LED technology a couple of small lights might be built into the lower decks. Maybe on my next one.

I was also thinking of putting in a small piece of paper with my name and info built into the hull. Some day, maybe 100 years from now someone will accidentally or on purpose break the ship and find it. Who knows.

Link to comment
Share on other sites

Improvising is a common theme in model ship building. When the improvised parts turn out better than the ones they replaced, well that is a great bonus!

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

  • 3 weeks later...

Nice Job Vincent, you’ve really made progress in little over a months’ time. The basic hull for  Sirene is almost the same as my HMS Unicorn, another Corel 1:75 scale. I like what you did with the keel/stem did you stain the plywood edges to make them match the outer veneer? Ive been afraid to oil my hull thinking I should sand a bit more, yours looks great!!

Link to comment
Share on other sites

Hi Sailorross. Thanks for the compliments. I love retirement  :D Gives me the time to work on my hobbies. I started the Sirene about 5 years ago and only got half way through the hull before I put it away. Work kept getting in the way. In December I took it out and have been working on it since.

 

Your Unicorn is looking good. It seems that many of the Corel kits are of very similar design. Regarding the keel and staining, I used 2 products on the entire ship.

 

The Formby's on everything. Easy to apply with some cheese cloth hand rubbed in. A couple of coats. I did the edges of the keel I used the Watco. It's got a very slight tint, but enough to darken just a bit. Same application method. 

 

I also used the Watco on the yardarms (you can see them in the background). The masts stay light (Formby's) and the yardarms are a shade darker. I need to give them a couple more coats.

 

Good luck with the Unicorn and keep in touch. Looking forward to seeing your progress.

post-27575-0-72009400-1487523551_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...