Jump to content

IJN Yamato by Wblakeny - DeAgostini - 1/250


Recommended Posts

Time to get the ship of the the building board.

 

Yamato-83.thumb.jpg.4d72861151203c3c236e9c28dfb26ec8.jpg

 

In want to be able to fix the ship securely to the building board again later on. Or on the final stand as well.
First i draw the middle line on the bottom plate and indicate two spots to drill the wholes.
Making sure that i'll drill them between the bulkheads.

 

Yamato-84.thumb.jpg.fba9de038cf53555e7ebad2b41078f9f.jpgYamato-86.thumb.jpg.351f732cff8f844bad9df28a1e08ee4a.jpg
 

I'm using two "inslagmoeren" called in dutch. Don't know the english term for it? Impact bolts ? 

 

Yamato-90.thumb.jpg.7604f6e0117bdc78a7b7ea20cad26cfa.jpg


I'm securing those between wooden blocks.

 

Yamato-91.thumb.jpg.549ef98116a95c7553b4babf1682380e.jpgYamato-92.thumb.jpg.dbafb8179705d0b68c680d1d8ebf20a4.jpgYamato-95.thumb.jpg.a602a11ab51785051e5065ea2231e6d3.jpgYamato-91
 

I glue the finished blocks between the frames, and securing the spaces between them with scraps of wood.

 

Yamato-96.thumb.jpg.5ccba78ad8c95279c9ee7e7a9d20078a.jpgYamato-97.thumb.jpg.810e0e664adab4a7c9047686adf03a8e.jpg

 

The yamato lying around in the shipyard.

 

Yamato-100.thumb.jpg.f7f43629d34e4ac8c52e67ff8c8ad73d.jpg

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

Here in the US, we call them T nuts. A good, sturdy mount you've made, Chris. Nice job, so far.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

  • 2 weeks later...

Next are the boat and aircraft hangars/decks.  First the platform outside the boat hangar is put in place.

 

Yamato-101.thumb.jpg.259bf3b9b09cf23130ca48717951070f.jpg

 

The parts for forming the aircraft hangar and the boat deck are seriously warped as well.

 

Yamato-106.thumb.jpg.2d16ffcdeea0ffe7857727279d561cc4.jpg

 

For the boat deck i want to put in a support at the right height, in order to get that deck straight.  So i glued a piece of scrap wood.

 

Yamato-109.thumb.jpg.2268338269f9bc90965be63a5a85d3fe.jpgYamato-110.thumb.jpg.897f776af8360f01b970df89312d0c29.jpg

 

By glueing an clamping them on all the points, i'll straighten the deck.


Yamato-112.thumb.jpg.2dccd6d267843bc2762118453b554f1e.jpgYamato-113.thumb.jpg.7f5327428453f570656f559edf0c0b5e.jpg

 

The sides of the boat hangar glued in place.


Yamato-118.thumb.jpg.1658c35671bcaffdec22932109b49325.jpg

 

The floor of the boat hangar is put in place, with a little plank as a spacer to keep the floor on its place.


Yamato-123.thumb.jpg.9e85e5d4f61f7daec6e4d60fb66839dc.jpgYamato-125.thumb.jpg.f3483e381567a25b80417d20d9dedffb.jpg

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

Cleaning up the superstructures.

 

The pieces of the superstructures were glued rather messy. So i used isopropanol to unglue the components.
Afterwards i use a sharp chisel to remove the glue remnants of the components.


Yamato-114.thumb.jpg.a3f0f3381d4d19d81088ba8cc3bdf169.jpgYamato-115.thumb.jpg.214c5620f8ed8a47ec3e04700dfd8bb7.jpg

 

The former builder has used a color which is not correct and which is too dark to my liking. 


Yamato-150.thumb.jpg.dd581ae2719fb99b6fb78633f3c93fb9.jpgYamato-151.thumb.jpg.f83ce0081c2a5e0391266bbd290f067e.jpg

 

With Acetone i removed the paint.

 

Yamato-152.thumb.jpg.37291105c5fe7297fa5f0cc0613b9d7f.jpgYamato-153.thumb.jpg.b18be204ae2ba419fb184319d6bb040e.jpgYamato-155.thumb.jpg.bd2b83c5351ba6d29748191916243f7c.jpg

 

And for the smaller parts in a smaller container.


Yamato-211.thumb.jpg.4a09d79afb32e7a9040fe3ebfc5e98c5.jpg

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

My most recent installment of the Yamato, I received month 7 of the Soleil Royal instead of the month 7 of the Yamato. :(

When I called DeAgostini, they told me "sorry about that...just keep the Soleil Royal installment we accidentally sent out and we will send you the correct month 7 installment for the Yamato." :)

And that's about all I've done with mine so far.

 

Yours on the other hand is coming along beautifully! 

Link to comment
Share on other sites

@ Carl,  yes, i had much precleaning to do, but it's done now. Now i can start the building without looking backwards again.

 

@ Daddyrabbit, thank you, i like your schnellboot.  I'd like to build one, in the future as well.  They are remarkable crafts.

 

 

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

Start of planking!


First we need to sand the bulkheads so that the planks can rest completely upon the bulkhead.


Yamato-134.thumb.jpg.286fc9cfdb7d2a209a26c80b9c126f9f.jpgYamato-135.thumb.jpg.5bcfbd1b9ecbcf845c2bd8e5589edff3.jpg

 

Then placing the first plank on each side. Using wooden spacers, i keep the pressure upon the plank while drying.

 

Yamato-136.thumb.jpg.f5e38e4587066386033b32bd65dec85c.jpg
After the first plank, i need to bevel each adjacent plank. I do this using a file or a sharp knife.
Yamato-137.thumb.jpg.286cb094fd97d1b9678f04929e9a8b2d.jpg
To reduce the pressure upon the planks, i soak them in a bottle of water. Afterwards i place them upon the ship and let them dry overnight.
Yamato-138.thumb.jpg.344e18a656a0a918ad3d031c07d214da.jpg
First 5 planks in place.
Yamato-140.thumb.jpg.73e267ca0992b4d750df7df95fd39a0e.jpgYamato-143.thumb.jpg.86f325926ecc8f7201f693cd34c16036.jpg

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

  • 1 month later...

Continued planking

 

Yamato-173.thumb.jpg.8e0954be0b01216b73599b613e1837e1.jpg

 

To provide more support for the planks on the stern, i glued a plank on the inside of the ships bottom plate.

 

Yamato-176.thumb.jpg.dc723c3ac95033242a89e7d9a23b4b25.jpg

 

Using my electric plank bender, i preformed the curvature of the plank at the bottom.

 

Yamato-179.thumb.jpg.9b64e4c0b939ed5506db9ff7e196d7f4.jpg

 

Continuation of the planking at the stern.

 

Yamato-185.thumb.jpg.2feb76f0f488a922af6857623b262745.jpg

 

I've started also to fill up the gaps created during the planking.

 

Yamato-193.thumb.jpg.b0f3bc522e1e05fe7b89521cfe5ac611.jpg

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

WOW!!!  awesome build........kin I watch? :)   very nice recovery work going on..........planking is looking super!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Just a month ago, I was looking through a search on Amazon for Woody Joe models (and they offer a wide selection) and found a 1:250 Yamato kit for $289! 

Because I have been receiving the monthly installments from DeAgostini and am currently at month 8, didn't quickly move to buy it though I should have. My remaining 4 installments will cost me more than the entire kit from Amazon. 

When I looked for it again after a week or so, it was gone. Not surprised really, someone got a fantastic deal on the complete kit.

Link to comment
Share on other sites

Your progress is coming along very nicely. However I do have to make a comment on the KIT quality. Why should one have to make so many adjustments on an already very expensive kit? This is not just DeAgostini but almost right across the board. In my 60 years of modeling I've always had to replace or add wood and parts to complete a wooden kit. Always it seems that something is warped or missing or not enough material has been included. Also in the Yamato's case material and instructions should have been supplied to achieve a realistice hull shape and texture. Anyways I hope  this isn't taken as a rant on your workmanship, just criticizing wooden ship kits in general.

Bill, in Idaho

Completed Mamoli Halifax and Billings Viking ship in 2015

Next  Model Shipways Syren

Link to comment
Share on other sites

both comments are valid......but it boils down to the simple fact that most kits are generic.   they are cost effective to sell.   whatever date,  refit,  theater,  or era,  the subject is to be,  is up to the modeler to decide.   pretty much every kit I've gotten,  I've spent extra for wood or fittings.  it comes with the territory.

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Yep, i'm with you guys on the quality of the kits. There's always need for some kit-bashing or replacing wood. Or like in this case, strengthening the hull.

 

In this case, i will also change the wood of the deck planking. I'd like to use some cedar wood for it. I'll not paint it black but leave it natural.

I already ordered some extra PE for more detailing, as i've noticed DeAgostini uses wood (too thick to scale) for the platforms on the superstructure.

Unfortunately there's not much choice in detailing sets for the scale 1/250.

 

Another thing, i will do, is simulating the platings of the hull. I was thinking of using copper tape. I intend to do a tryout a piece of scrap wood.

 

For the painting, i'd like to imitate Greg's SUPERBE Yamato. But i've never used an airbrush before, so i'll have to test it on something. 

I'll be getting an  H&S Evolution, a birthday present from my wife. 

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

Agree with CDW. Try the airbrush with the new MRP Paints http://mrpaint.sk/ (only drawback is the smell) and the result will be perfect. 

Jörgen
 
Current:  Sherbourne - Caldercraft 1/64

            Vasa - DeAgostini 1/65
Finished: Endeavour - Americas Cup J class 1934 - Amati 1/80

Other:    Airplanes and Tanks

 

 

Link to comment
Share on other sites

Link to comment
Share on other sites

They are lacquer based quite close to alclad ,that is the problem with the fumes. However, the airbrushing with them is a pleasure. They cure very hard and cover very well. They are pre thinned in the bottles so it is only to spray. It works very well to use the Mr hobby levelling thinner on them. You can do the smallest dots or line with perfect blending result and they never clogged like water based paints. Also the cleanup is very easy. But a vent or respirator is needed.  Here are two reviews on them, one from Flory models in Uk and one from Dogs models in US. Sorry WBlakeny for posting all these things here but I want you to have a really good start with the airbrush and it can't be easier than this.

 

 

 

Jörgen
 
Current:  Sherbourne - Caldercraft 1/64

            Vasa - DeAgostini 1/65
Finished: Endeavour - Americas Cup J class 1934 - Amati 1/80

Other:    Airplanes and Tanks

 

 

Link to comment
Share on other sites

17 minutes ago, Passer said:

... Sorry WBlakeny for posting all these things here but I want you to have a really good start with the airbrush and it can't be easier than this. ....

 

 

No problem, that's the reason why i have a build log, to get some advice and information about stuff i can use...

So thank you!

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

Continued planking. 

 

I've started on the last belt of planking, just above the armour belt.  

There are some gaps appearing between the pretapered planking provided by DeAgostini and the plank that needs to be placed just above.

 

Yamato-242.thumb.jpg.6d1f0c2ce890f2b02d2116b3c4f2102d.jpg

Yamato-246.thumb.jpg.86d6b8319d70624ed636b9950d33c560.jpg

 

To provide a support underneath the gap, so i can fill it up later, i glued some scrap pieces of wood behind the plank. Making sure they don't rest again the bulkheads.

 

Yamato-243.jpg

 

Then glue the plank on its place.

 

Yamato-248.jpg

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

Last thing to do is the beginning of the armour belt at the front of the ship.

Therefore a plank needs to be tapered.

 

Yamato-252.thumb.jpg.64d28b34fcb2546cd2511d7e4825fc17.jpg

Yamato-254.thumb.jpg.300d207c3baf82851b2ebc5581e7a985.jpg

 

Putting it all in place.

 

Yamato-258.thumb.jpg.744331407f64d8a2c80e7358d57f2c36.jpg

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

YES, she's all planked! She turned into a ship.

I also glued the boat deck structure (the metal pieces).

 

Yamato-261.thumb.jpg.77a0a0f81637168b6db26d1d0290311b.jpg

Yamato-262.thumb.jpg.764380c5b9dbc67e59b070cdc5e3c265.jpg

 

 

Chris

Current builds :    

 

On hold :

IJN Yamato by DeAgostini - 1/250

 

Completed builds :

Bermuda boat Corsair (scratch)

President by Sergal - 1/60

Link to comment
Share on other sites

nice looking hull......nice contour at the bow ;) 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...