S.Coleman Posted March 31, 2017 Author Share #61 Posted March 31, 2017 Onto construction of the 3 masts and bowsprit. The cross tree timbers that hold the fighting tops are extremely brittle. And one wrong move can mean a split or a snap. The masts caps are made of a hard metal painted black. And some filing and sanding with light emery paper had to be done to remove the unsightly burs. To fit the caps on, The tops of each mast segment had to be squared off to fit the square hole in the bottom of the metal mast caps. Further on the segment between the fighting tops and the masts cap had to be squared as well. At this point all the blocks for the running rigging were attached now while the masts were easy to work on before installing on the ship. Pictured here is the main mast, Fore mast in the background. Yet to be fabricated is the Mizzen mast. coxswain 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 1, 2017 Author Share #62 Posted April 1, 2017 Masts completed with all blocks in place. Hull had also received two coats of "Off White". And the rudder chains also added. Stern lanterns assembled and installed. If you with me to take any real close ups of a particular area or time of build please let me know GrantGoodale, CaptainSteve, granta and 3 others 6 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 1, 2017 Author Share #63 Posted April 1, 2017 Im unsure of the rudder hinges. I have the two above the water line painted black. Should I paint the hinges all black? What are your thoughts? Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
granta Posted April 1, 2017 Share #64 Posted April 1, 2017 I like what you've done there, Scott. I'm no expert but I would imagine that the "white stuff" anti fouling mix would be slapped over everything prior to launch. Including the rudder hinges. The hinges above the waterline would remain black. Cracking build by the way. Grant S.Coleman and CaptainSteve 2 Quote Link to comment Share on other sites More sharing options...
S.Coleman Posted April 1, 2017 Author Share #65 Posted April 1, 2017 Cheers Grant. Thank you for your comment. That's what i was thinking. On my previous builds I have simply painted them black like here on my mamoli Rattlesnake, Blue Shadow and HMS Bounty. I like the look of them black but I want to change my ways to be more realistic of that period. Thanks. coxswain, Captain Poison, granta and 3 others 6 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Tallshiptragic Posted April 1, 2017 Share #66 Posted April 1, 2017 You're right to have them white. They would have painted the entire hull below the waterline with white stuff. Have included a pic of Endeavour high and dry for you. Bill Tuttle, coxswain, Captain Poison and 3 others 6 Quote Anton T Current build 1/78 Sovereign of the Seas - Sergal - kit bashed 1/72 Arleigh Burke class DDG flight iia/iii - Sratch built RC - no log Waiting for further inspiration STS Leeuwin II 1/56 scratch built (90% completed) Previous builds - completed 1/72 HMAS Brisbane, Airwarfare Destroyer 2014 -Scratch built RC - completed 1/64 HMS Diana 1796 - caldercraft kit - completed 1/75 Friesland 1668- mamoli kit - completed 1/96 HMAS Newcastle FFG 2011- scratch built RC - completed 1/75 Vasa - Billing Boats - completed Link to comment Share on other sites More sharing options...
S.Coleman Posted April 1, 2017 Author Share #67 Posted April 1, 2017 Absolutely beautiful photo Cheers. I have a massive framed picture of the Endevour sailing. She is a beautiful ship. CaptainSteve 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 1, 2017 Author Share #68 Posted April 1, 2017 I shall leave her the way she is then. Cheers for your input guys. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 1, 2017 Author Share #69 Posted April 1, 2017 A few shots of Bow, Stern and overall shot. I think its looking good. CaptainSteve, Sjors, coxswain and 3 others 6 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 1, 2017 Author Share #70 Posted April 1, 2017 In the first photo it shows the 4th band of rope up the fore mast abit on the side. So this has since been removed and rewound. Hope you all like. granta 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Tallshiptragic Posted April 1, 2017 Share #71 Posted April 1, 2017 She does look fantastic, will be great to see it along side my Sovereign once she's completed being approximately the same scale. CaptainSteve and S.Coleman 2 Quote Anton T Current build 1/78 Sovereign of the Seas - Sergal - kit bashed 1/72 Arleigh Burke class DDG flight iia/iii - Sratch built RC - no log Waiting for further inspiration STS Leeuwin II 1/56 scratch built (90% completed) Previous builds - completed 1/72 HMAS Brisbane, Airwarfare Destroyer 2014 -Scratch built RC - completed 1/64 HMS Diana 1796 - caldercraft kit - completed 1/75 Friesland 1668- mamoli kit - completed 1/96 HMAS Newcastle FFG 2011- scratch built RC - completed 1/75 Vasa - Billing Boats - completed Link to comment Share on other sites More sharing options...
S.Coleman Posted April 2, 2017 Author Share #72 Posted April 2, 2017 Yes not much between them scale wise. Still fair bit of work to go yet. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Tallshiptragic Posted April 2, 2017 Share #73 Posted April 2, 2017 Definitely on mine haha! Just cut the first ports wow what a headache I'll post later once I've done the port side. S.Coleman 1 Quote Anton T Current build 1/78 Sovereign of the Seas - Sergal - kit bashed 1/72 Arleigh Burke class DDG flight iia/iii - Sratch built RC - no log Waiting for further inspiration STS Leeuwin II 1/56 scratch built (90% completed) Previous builds - completed 1/72 HMAS Brisbane, Airwarfare Destroyer 2014 -Scratch built RC - completed 1/64 HMS Diana 1796 - caldercraft kit - completed 1/75 Friesland 1668- mamoli kit - completed 1/96 HMAS Newcastle FFG 2011- scratch built RC - completed 1/75 Vasa - Billing Boats - completed Link to comment Share on other sites More sharing options...
CaptainSteve Posted April 2, 2017 Share #74 Posted April 2, 2017 Lookin' good, Scott. It would be most interesting to see yours and Anton's Sovereign battlin' it out on Lake Monger. granta and Tallshiptragic 2 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve Link to comment Share on other sites More sharing options...
Tallshiptragic Posted April 2, 2017 Share #75 Posted April 2, 2017 Hahaha for sure When I get a chance I'll pull out my 1/72 arleigh Burke for a size comparison (still in the build process also but the hull and superstructure are complete). Something appealing with having the models at the same or close to same scale. CaptainSteve 1 Quote Anton T Current build 1/78 Sovereign of the Seas - Sergal - kit bashed 1/72 Arleigh Burke class DDG flight iia/iii - Sratch built RC - no log Waiting for further inspiration STS Leeuwin II 1/56 scratch built (90% completed) Previous builds - completed 1/72 HMAS Brisbane, Airwarfare Destroyer 2014 -Scratch built RC - completed 1/64 HMS Diana 1796 - caldercraft kit - completed 1/75 Friesland 1668- mamoli kit - completed 1/96 HMAS Newcastle FFG 2011- scratch built RC - completed 1/75 Vasa - Billing Boats - completed Link to comment Share on other sites More sharing options...
Sjors Posted April 2, 2017 Share #76 Posted April 2, 2017 Hi Scott, Finished by tomorrow? Men, you are in a hurry but it looks just great! Sjors Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre Link to comment Share on other sites More sharing options...
S.Coleman Posted April 2, 2017 Author Share #77 Posted April 2, 2017 Cheers guys. I have back logged up until about now. So the build will progress slower now. Cheers for all the likes and comments. And it's off to a start in the Rigging. Starting of with all the ratlines, backstays and main mast supports. I use CA to harden the ends of the threads to make it easier to pass through blocks Deadeyes etc. All the knots on all are held by 50:50 PVA glue. Tallshiptragic, marktiedens, Sjors and 3 others 6 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 2, 2017 Author Share #78 Posted April 2, 2017 Close up of Deadeye assembly. marktiedens, coxswain, Sjors and 2 others 5 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 2, 2017 Author Share #79 Posted April 2, 2017 I always start ratlines with the mizzen mast first. And work my way towards the bow. Anybody eles do this or is it just me More to come soon. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Sjors Posted April 3, 2017 Share #80 Posted April 3, 2017 I do the same Scott, Start with the mizzen and work forward. The only thing that i see is that the rope you are using for the lanyards are very fuzy. Maybe you can change rope or using beewax? Sjors CaptainSteve 1 Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre Link to comment Share on other sites More sharing options...
S.Coleman Posted April 4, 2017 Author Share #81 Posted April 4, 2017 Thanks Sjors. Yes I notice the too. I have been using beeswax but I'm sure I didn't put enough on. Sjors 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 4, 2017 Author Share #82 Posted April 4, 2017 Ratlines continues. Very repetitive but progress is showing slowly. VACorsair, coxswain and CaptainSteve 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Tallshiptragic Posted April 5, 2017 Share #83 Posted April 5, 2017 Ratlines! Oh how I hate those haha. It's surprising though how after one set of shrouds it changes the appearance so much. S.Coleman and CaptainSteve 2 Quote Anton T Current build 1/78 Sovereign of the Seas - Sergal - kit bashed 1/72 Arleigh Burke class DDG flight iia/iii - Sratch built RC - no log Waiting for further inspiration STS Leeuwin II 1/56 scratch built (90% completed) Previous builds - completed 1/72 HMAS Brisbane, Airwarfare Destroyer 2014 -Scratch built RC - completed 1/64 HMS Diana 1796 - caldercraft kit - completed 1/75 Friesland 1668- mamoli kit - completed 1/96 HMAS Newcastle FFG 2011- scratch built RC - completed 1/75 Vasa - Billing Boats - completed Link to comment Share on other sites More sharing options...
S.Coleman Posted April 5, 2017 Author Share #84 Posted April 5, 2017 Your not wrong Anton. It takes the build on a completely different journey. It makes constructing the hull seem such an easy task. CaptainSteve and Tallshiptragic 2 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Sjors Posted April 5, 2017 Share #85 Posted April 5, 2017 Very nice Scott. Are you using the clove hitch fot the knots? Sjors Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre Link to comment Share on other sites More sharing options...
S.Coleman Posted April 5, 2017 Author Share #86 Posted April 5, 2017 Thanks Sjors. No knots in my ratlines. I use a thickend diluted white glue. And the ratlines are simply glued into place. Dries clear and no staining. Here is a veiw of the fore mast. The futtock shrouds are not attached yet and are just dangling. I know you can't see knots with this method but I like the look. VACorsair, Sjors, CaptainSteve and 1 other 4 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 5, 2017 Author Share #87 Posted April 5, 2017 Here is another shot. VACorsair, CaptainSteve, coxswain and 1 other 4 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 5, 2017 Author Share #88 Posted April 5, 2017 Main mast futtock shrouds and more ratlines. VACorsair, Sjors, CaptainSteve and 1 other 4 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 5, 2017 Author Share #89 Posted April 5, 2017 It looks like the Port side futtock shrouds are not attached at the same height as the ones one the starboard side but they are. After taking this pic I had to check actually. Must be the way I took the photo. Waitoa 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Tallshiptragic Posted April 6, 2017 Share #90 Posted April 6, 2017 That's an interesting way of attaching the ratlines Scott. Especially to come out so uniformed and neat. CaptainSteve 1 Quote Anton T Current build 1/78 Sovereign of the Seas - Sergal - kit bashed 1/72 Arleigh Burke class DDG flight iia/iii - Sratch built RC - no log Waiting for further inspiration STS Leeuwin II 1/56 scratch built (90% completed) Previous builds - completed 1/72 HMAS Brisbane, Airwarfare Destroyer 2014 -Scratch built RC - completed 1/64 HMS Diana 1796 - caldercraft kit - completed 1/75 Friesland 1668- mamoli kit - completed 1/96 HMAS Newcastle FFG 2011- scratch built RC - completed 1/75 Vasa - Billing Boats - completed Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.