brunelrussell Posted February 1, 2018 Share #1 Posted February 1, 2018 Brunelrussell here; as some of you know I am working on a large-scale model of the steamship Great Eastern. The ship had two compasses surmounted by domes around 2 feet in diameter, or one quarter inch scale size. I tried using hollow brass beads but in compressing them to the slightly oblate shape required, the seams opened. I then tried making them of brass tubing rings glued together, which had worked on the capstan tops (brass sheet in that case) but the edges of some of the layers exfoliated. Nobody on line has hollow brass spheres that small. If anybody knows of another way, please lemme know. Thanks in advance Quote Link to comment Share on other sites More sharing options...
grsjax Posted February 1, 2018 Share #2 Posted February 1, 2018 You can use a dapping block to make metal domes. Here is a link to a set on Amazon https://www.amazon.com/dp/B00JPLHDR8/ref=asc_df_B00JPLHDR85356372/?tag=hyprod-20&creative=395033&creativeASIN=B00JPLHDR8&linkCode=df0&hvadid=216554815864&hvpos=1o1&hvnetw=g&hvrand=533642903297776801&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1015579&hvtargid=pla-416568837597 . You can probably find the same thing cheaper on eBay. You can find these in pretty much any size you need. druxey, mtaylor and John Allen 3 Quote My advice and comments are always worth what you paid for them. Link to comment Share on other sites More sharing options...
Moxis Posted February 1, 2018 Share #3 Posted February 1, 2018 When I was building my model of the Clara May a few years ago I met the same problem. After thinking hard I finally used following method: First I made the form of the compass dome out of plasticine. When ready, I covered it with a jelly mixed of epoxy and milled fibreglass "dust". When the first layer was cured I applied second layer of the same stuff. And finally when everything had cured, I cut an oval hole on the dome where the glass should be situated. Through this hole plasticine was removed and voila, I got a hollow quite strong dome which was then sanded smooth and painted with brass paint. The last thing was to glue a printed compass rose inside the dome and an oval transparent "glass" into the hole and the compass was ready. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
KeithAug Posted February 1, 2018 Share #4 Posted February 1, 2018 Hi Brunelrussell - If you look at my Altair Build - top of page 20, this is an option for making a dome. John Allen and mtaylor 2 Quote Keith Current Build:- Cangarda (Steam Yacht) - Scale 1:24 Previous Builds:- Schooner Germania (Nova) - Scale 1:36 https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/ Schooner Altair by KeithAug - Scale 1:32 - 1931 http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702 J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration. http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029 Other Topics Nautical Adventures http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846 Link to comment Share on other sites More sharing options...
brunelrussell Posted February 8, 2018 Author Share #5 Posted February 8, 2018 I just may try that dapping thing, but thank you all for your suggestions! mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.