Jump to content

Prince de Neufchatel by rafine - FINISHED - Model Shipways - 1:64


Recommended Posts

Hi Bob, looking good! As to your copper plating, its very nice! The spring 2018 issue of the NRJ (Page 73) had a letter in it detailing how the nails that fasten the copper plating to the hull would hardly be visible anyway, as they would not be proud of the surface.

-Elijah

 

Current build(s):

Continental Gunboat Philadelphia by Model Shipways

https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/

 

Completed build(s):

Model Shipways Phantom

http://modelshipworld.com/index.php?showtopic=12376

 

Member of:

The Nautical Research Guild

N.R.M.S.S. (Nautical Research and Model Ship Society)

Link to comment
Share on other sites

Thanks so much Rich, Elijah and the "likes".

 

Rich,get out your anti-boredom pills. The repetition of doing the guns, particularly the rigging, is almost mind numbing.

 

Elijah, were it not for physical issues that I was going through at the time that I did the coppering, I would probably have done the nailing in some fashion. I'm now just as happy that I didn't.

 

Bob

 

 

 

Link to comment
Share on other sites

All of the guns are now installed and rigged. A  big "thank you" to RustyJ for graciously providing me with the 1/8" Syren blocks that I needed to complete the gun rigging (they were out of stock). This is a perfect example of the generosity and friendship that make this site the great place that it is.

 

Bob

 

 

fullsizeoutput_85b.jpeg

fullsizeoutput_85c.jpeg

fullsizeoutput_85d.jpeg

fullsizeoutput_85e.jpeg

fullsizeoutput_85f.jpeg

Link to comment
Share on other sites

She is looking superb bob.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

look'in good Bob.......very nice work with the cannon rigging...neatly done.   kudos to Rusty for help'in ya out!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Beautiful gun rigging! As usual I am amazed how fast you went through the rigging of the carronades! It took me forever to get them finished.

 

Thomas

Current Built:   Model Shipways  Syren  (US Brig 1803)

 

Last Built:        Anfora (kit bashed)  Ictineo II  (1st steam powered submarine 1864)

 

Link to comment
Share on other sites

Link to comment
Share on other sites

That's an impressive array of armament, Bob.  As I recall, the two carronades right up at the bow were a really tight fit.  Yours look just right to me.

 

Cheers,

 

Martin

Current Build:  HMS FLY 1776

 

Previous Builds:  Rattlesnake 1781

                        Prince de Neufchatel

Link to comment
Share on other sites

While rigging the guns, I was also making up the gunport lids. I decided to finish and mount them at this point. The lids were made in two layers: laser cut pieces from the kit that were painted red and boxwood strip planking, cut to fit. The hinges are black paper. Blackened eyebolts were bent over and inserted into drilled holes. The lids at the aft end, where there are no guns, were mounted in the closed position.

 

The next work will be on the head.

 

Bob

fullsizeoutput_860.jpeg

fullsizeoutput_864.jpeg

fullsizeoutput_862.jpeg

fullsizeoutput_863.jpeg

P7220154.JPG

Link to comment
Share on other sites

Just beautiful!!! John

Member:

Connecticut Marine Model Society

Nautical Research Guild

Model Ship World

"So we beat on, boats against the current, bourne back ceaselessly into the past" F. Scott Fitzgerald - The Great Gatsby

"If at first you don’t succeed.......skydiving is probably not for you”

 

Link to comment
Share on other sites

gun port lids look super..........look like you plotted them well to miss the chains ;)   I was daunted when I did the Thermopylae......I waited till I had them in place.   then I could add the lids {closed,  of course} ;) 

 

very nice!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Link to comment
Share on other sites

  • 2 weeks later...

Well, I've been up north for the past couple of weeks having a medical procedure, but now it's back to work on PdN. I've done the head work , which is somewhat simpler than on others that I've done. That's not to say that it is ever easy to fit the cheeks and rails, but at least there was no middle rail or eking rail to fit. Once again, the plans and instructions are very vague on details, so I just fumbled along. All of the parts were made from boxwood sheet and strip.

 

Bob

fullsizeoutput_865.jpeg

fullsizeoutput_866.jpeg

fullsizeoutput_867.jpeg

fullsizeoutput_868.jpeg

fullsizeoutput_869.jpeg

fullsizeoutput_86a.jpeg

Link to comment
Share on other sites

Beautiful work Bob, hope you are feeling better

 

Link to comment
Share on other sites

Looking really nice bob,   all the best to you after your op.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...