Jim Rogers Posted July 1, 2018 Share #1 Posted July 1, 2018 (edited) Bought kit from Model Expo on sale. Edited July 1, 2018 by Jim Rogers Tom E 1 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 1, 2018 Author Share #2 Posted July 1, 2018 Started build by assembling the lower bulkheads to the bulkhead former and baseplate. Everything fit nice and tight and square. Canute, GuntherMT, lmagna and 2 others 5 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
lmagna Posted July 1, 2018 Share #3 Posted July 1, 2018 Jim You mean you don't have it built yet! I'm going to take my favorite place in the rafters along with the bats so I can keep a watch on how you do it! REMEMBER....... YOU ARE BEING WATCHED! Looking forward to this one. Jim Rogers, alde and Canute 3 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 1, 2018 Author Share #4 Posted July 1, 2018 No need to carve a bearding line as it is formed by adding pieces D-1 through D-3 into slots left between the lower bulkheads and the bulkhead former. lmagna, GuntherMT, Canute and 2 others 5 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 1, 2018 Author Share #5 Posted July 1, 2018 The last thing I did today Lou was add the Bow and stern fillers and get a rough fairing sand done. alde, Canute, Dutchman and 2 others 5 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 1, 2018 Author Share #6 Posted July 1, 2018 Don't know why the photos are out of order, not the way I uploaded them. Canute 1 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
lmagna Posted July 2, 2018 Share #7 Posted July 2, 2018 Great progress Jim You have almost caught up to where I am in my build and you have been at it only one day! Canute 1 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 3, 2018 Author Share #8 Posted July 3, 2018 Today I worked on the Stern Assembly and the counter. Again all the parts fit nice and snug. alde, Dutchman, GuntherMT and 2 others 5 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 3, 2018 Author Share #9 Posted July 3, 2018 Counter frame work. Canute, lmagna, alde and 4 others 7 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
lmagna Posted July 3, 2018 Share #10 Posted July 3, 2018 (edited) Looks like you got a lot of time in today Jim. Are you pretty much following the instructions or just doing what seems sensible? Edited July 3, 2018 by lmagna Canute and Jim Rogers 2 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 3, 2018 Author Share #11 Posted July 3, 2018 (edited) I am following the instructions so far. I have found one hiccup. You have to remove a chunk of the main upper support from the slot B9 goes in as it blocks the entire slot, but that is why we have Dremels. This is a nice little kit BUT you will learn ZERO skills that you don’t already have. Everything is cut so precise and fits so snug it goes really fast. I stop to let the glue set up otherwise I would be planking this puppy already. The figuring out what exactly they mean in the English translation can be frustrating. When I was mounting C9 they mentioned setting in a beam as in figure such and such. A beam means one thing to me a square chunk of wood, to them I finally figured out it was the upper support. I went through the box, examined each figure, tried to figure out where this elusive beam would go. Took a half an hour to settle on the upper support. Edited July 3, 2018 by Jim Rogers Canute 1 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
lmagna Posted July 3, 2018 Share #12 Posted July 3, 2018 Well I suppose they had to make something challenging! Might as well be the language issues. I can never understand why foreign manufactures can't hire native language people who speak THEIR language as a second language to write instructions instead of the other way around! AL gave it up all together, all I would have if I was actually building the Independence from the kit would be pictures and a list of woods! Don't go too fast. I can't interpret pictures that fast! Canute 1 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 7, 2018 Author Share #13 Posted July 7, 2018 I purchased the laser upgraded parts. I’ll have another update tomorrow. Canute 1 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
lmagna Posted July 8, 2018 Share #14 Posted July 8, 2018 8 hours ago, Jim Rogers said: I purchased the laser upgraded parts. Great I have been wondering about those as well. Now I will get a twofer. Two for the price of one. Can'f beat that. Canute 1 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 9, 2018 Author Share #15 Posted July 9, 2018 Weekly update Finished framing the hull Alignment of the bulkheads is accomplished by attaching E-1 to the top and then aligning the bulkheads to the gunport. E-1 rests on cutouts and stepson the bulkhead GuntherMT, Dutchman, GrantGoodale and 2 others 5 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 9, 2018 Author Share #16 Posted July 9, 2018 The decks and forward timbers are added next. During this operation you assemble a jig ( although it is not called this) to aid in lining up the forward timbers. It is called a conductor in the plans. The instructions have you remove it, wrap it in cellophane and reinstall after your timbers are aligned. I did this but really see zero reason. After the glue drys the forward timbers are really sturdy. Oh and they NEVER tell you to remove it. GuntherMT, Dutchman and Canute 3 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 9, 2018 Author Share #17 Posted July 9, 2018 Next we start planking by attaching the first four upper planks and the Garboard plank. All planks are preshaped and numbered. The cellophane wrapped jig is really just a PITA during this operation. After attaching E-1 I removed it. Dutchman, Canute and GuntherMT 3 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 9, 2018 Author Share #18 Posted July 9, 2018 The remainder of the planks are attached from the Garboard up. The final Plank E-5 must be adjusted to fit. Rough sanding followed. Canute, mtaylor, GuntherMT and 4 others 7 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 21, 2018 Author Share #19 Posted July 21, 2018 Update: 1. Finished Second planking 2. Attached interior and exterior veneers. Painted exterior a flat white and interior a flat green. 3. Got decks installed. 4. Received my Laser upgrade parts and got them installed. 5. Got belaying pin racks and pins installed. 6. Companion way and skylight installed. lmagna, GuntherMT, Tom E and 5 others 8 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Tom E Posted July 22, 2018 Share #20 Posted July 22, 2018 Great build Jim, The more I see these Master Korabel kits, the more they interest me. Maybe just enough interest to pick one up. Model Expo seems to have foreign kits on sale a lot lately. Tom E mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Jim Rogers Posted July 22, 2018 Author Share #21 Posted July 22, 2018 I picked this one up at a Model Expo Sale. Tom E and mtaylor 2 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted August 12, 2018 Author Share #22 Posted August 12, 2018 Got the cannons built and installed, built and installed one of Chuck's helm wheels (it is a teeny bit large but it looks miles better than WM that came with kit), built and installed grates (Chuck's), got the binnacle built and installed (Eugene you might want to correct directions and add binnacle location). Worked on head work. mtaylor, GuntherMT, svein erik and 8 others 11 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
lmagna Posted August 12, 2018 Share #23 Posted August 12, 2018 Great progress Jim. I like your choice of colors. mtaylor and Jim Rogers 2 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Jim Rogers Posted August 13, 2018 Author Share #24 Posted August 13, 2018 Thanks Lou. mtaylor 1 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
lmagna Posted August 13, 2018 Share #25 Posted August 13, 2018 I did forget to ask though, was the last port side cannon set up for fishing? Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Tim Curtis Posted August 13, 2018 Share #26 Posted August 13, 2018 Hi Jim. I like your work. Thanks for sharing it with us. Great job....and very speedy. I have started this kit too, and I think its fantastic. However, I cannot find any paintings, plans etc of the original ship Phoenix. Have you been able to find anything? I am slightly suspicious that the kit is not actually based on the original ship, but is a design adapted from other ships of the same period. A little like MK have done for their new Avos kit. I dont care that much....but I might build the kit slightly differently if I know its not actually a proper representation if the original Phoenix. Value your thoughts. Tim. Quote Link to comment Share on other sites More sharing options...
Jim Rogers Posted August 13, 2018 Author Share #27 Posted August 13, 2018 12 hours ago, lmagna said: I did forget to ask though, was the last port side cannon set up for fishing? Lou it is set up for Anti-Submarine Warfare. Very effective, not one submarine attack during her entire career. lmagna, Warnerade and paulsutcliffe 3 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
Jim Rogers Posted August 13, 2018 Author Share #28 Posted August 13, 2018 11 hours ago, Tim Curtis said: Hi Jim. I like your work. Thanks for sharing it with us. Great job....and very speedy. I have started this kit too, and I think its fantastic. However, I cannot find any paintings, plans etc of the original ship Phoenix. Have you been able to find anything? I am slightly suspicious that the kit is not actually based on the original ship, but is a design adapted from other ships of the same period. A little like MK have done for their new Avos kit. I dont care that much....but I might build the kit slightly differently if I know its not actually a proper representation if the original Phoenix. Value your thoughts. Tim. Tim I have found very little history. There was a little splurge in Wikipedia. MK never gives any color scheme on any of their models so I just do what I think the Ship may have looked like. Tim Curtis and David Lester 2 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut. Link to comment Share on other sites More sharing options...
lmagna Posted August 13, 2018 Share #29 Posted August 13, 2018 3 hours ago, Jim Rogers said: Very effective, not one submarine attack during her entire career. I had not considered that! Obviously a design well ahead of her time. Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.