Jump to content

Santa Maria 1492 by Katsumoto - FINISHED - Artesania Latina - scale 1:65


Recommended Posts

***Santa Maria 1492 - Artesania Latina***

 

Hello shipmates,

 

Before we are getting started with my new buildlog, a short introduction of myself and the ship is in order.

I'm a member of this forum for many years, and I live in The Netherlands a small country in Europe. Once we were dominating the world seas by having more ships in the water as a nation then all ships from all countries combined. So ships and shipbuilding runs through the veins so to say. Unfortuately after the big crash of MSW all my photo's and my buildlogs were gone. For a few years I put my hobby asside and concentrated on my family and on my work. 

At this moment I've found some spare hours to work on my hobby, and I would like to share my new buildlog with you guys and gals.
please have a bit patience on my written English, because it's not my native language and so I'll probably make some grammatical mistakes and I appologies upfront... :blush:

 

To the project...

 

5e482f21f3ea99ecc9f180a12f8db008.jpg

 

 

History

The Santa Maria originally named La Gallega, was the largest of the three ships used by Christopher Columbus in his first voyage. Her master and owner was Juan de la Cosa. She was built in Pontevedra, Galicia, in Spain's north-west region. Santa Maria was probably a medium-sized nau (Carrack), about 58ft long on deck, and according to Juan Escalante de Mendoza in 1575, SM was "very little larger than 100 toneladas" (about 100 tons, or tuns). She was the flagship for the expedition aside La Nina and La Pinta, two smaller of the caravel-type ships.

 

Shipwreck

With three masts, Santa María was the slowest of Columbus' vessels but performed well in the Atlantic Ocean crossing. Then on the return trip, on 24 December (1492), not having slept for two days, Columbus decided at 11:00 p.m. to lie down to sleep. The night being calm, the steersman also decided to sleep, leaving only a cabin boy to steer the ship, a practice which the admiral had always strictly forbidden. With the boy at the helm, the currents carried the ship onto a sandbank, running her aground off the present-day site of Cap-Haïtien, Haiti. It sank the next day and was lost forever...

 

The build

At first, let's inspect the workplace, which is the kitchen table by the way, and the box...and yes, the box on the left is my toolkit and on the right the ship...:D

b26d9d2a5038c72cbb8735b447b491f1.jpg

c06da9731bc6c145ee84a56573eb406e.jpg

b46597e932c7e0161d4b604a54a0c06b.jpg

Everything looks neat and tidy at first glance. The box is well organized and the wooden parts and timber are of a good quality as can be expected from AL.

However, the buildmanual turns out to be very dissapointing. A few photo's on one single page and an instruction list is all that's added to the box. The best parts are the two bigger drawings of the rigging and masts which looks very nice doh.

 

 

The Bulkheads and false keel / keelplate

 

I start by numbering all the bulkheads and parts on the plate. They are all lasercut and I use some sandpaper to remove the burn from the laser.
After inspecting a collect all the parts and dry-fit them together to see how good it fits.....it doesn't!

 

Afbeelding

 

4cbeebb464a97c4fc3259f6da7ddddbc.jpg

5d0e9f816373fdb83f0cb7499f9e47db.jpg

After some corrections, the bulkheads fits nicely on the false keel. However I noticed a small warp in the keelplate.

I did some further inspection and Yes, it's warped just between bulkhead 12 and 10.

 

5a9393aa4c3a16b52a841f13cfed5e6f.jpg

246c601be5d5869a89b375926157f47d.jpg

This needs to be fixed otherwise I run into some problems later on....I took the keel plate and soaked it in some water. I let it dry between a couple of books with some pressure on the books so the plate was fixed into a flat position. I let it dry for a day and the next day it was straight.

I put everything together again and glued the bulkheads into position. 

 

 

The false deck

 

Next step is to place the false deck on top of the bulkheads. Again, the false keel was pre-fabricated and lasercut.
I use the small brass nails and glue to fixate the plate on to the bulkheads. I have limited tools and clamps at my posession at this moment, so I use the nails.

They will be coverd up later when the final layer of thin wooden strips are placed on top of the false deck.

e6ec2ce58c1cbe98491e2655ab9fd6c0.jpg

21e6939c629434bdb04db48697e3ccca.jpg

 

Overhere I use a nail (red circle) to "help" the deck plate a litte bit and guides it into a better position....

d5976e7b548fb631c65d99568f2b1275.jpg

After his I placed some blocks to make the bow a bit stronger and sturdier.

 

10b2dc48b5a5029c007fbd9bbd1509da.jpg

878a8fe398837c24b664cfac1c7fb6ab.jpg

Now it's time to sand the end of the bulkhead so they are prepared for planking the first layer of the hull. It will be a dual layered or planked hull.
I took my time on this process. If done correctly, the beauty of the lines and shape of hull will shown after the planking process.

It is also the part were I struggle the most and we'll have to see later on if I made some mistakes or not...

 

4a29b7058b35884da353fc9d66e1997c.jpg

3485ced96b9e61b35942d409b9788c7e.jpg

So, to be continued soon....

 

regards,
Peter

 

Link to comment
Share on other sites

Mistakes are made...

 

After installing the first false deck. I measured the centre of the deck and drew a center line with a pencil.

Then the mistake happened. I was looking for the veneer strips for the deck, but couldn't find it. I only had some thicker wood. So i chopped some in little pieces and after a while.....still chopping wood....I've found the veneer strips for the deck....

Then I wondered what I was cutting into little pieces, it turned out to be the strips of wood for the hull......some swearing happend after that....

 

41f12d4ee138592e5714523cad3bf6cf.jpg

9aa06a54b0102c6bf99aaab1fd8c16fd.jpg

ac605e9e3761a80a32ae95bdd71d0db5.jpg

059f2375f12c27aa13a52e8a5fc1d705.jpg

396472208c190c9f692dc609b7a8584f.jpg

 

So, as Bob Ross liked to say: We don't make mistakes, only happy accidents...

With that in mind, I continued and corrected my mistake and cut the right veneer strips into little pieces...double checked those were the right ones.

 

85cf0c41d2ed10068c73c7beed288f78.jpg

77941a40e4f10a579cda17792fa6f4b6.jpg

55887f0ec5216d7a118f081a014c0e97.jpg

 

904e19c6e6dfe58960496131987501e2.jpg

 

9e2a99e05a1ee41c0cae06c6d626800e.jpg

 

2ac76ee9858722d0e12a5511ee5e9ed3.jpg

 

571328722b567eea097bdcb1bba7bf8d.jpg

 

3b8fca7bee233a8b6fc26e5dabc7847a.jpg

 

photo 451574

 

eada2cab0c6632aa9e3f9e93ca969538.jpg

 

14f23a90738990a324ce53176b8417ba.jpg

 

957ad149e1c80b322c4047c8d8bffb92.jpg

78ddb9a210ba003c83924b2b97bd0045.jpg

 

3af0e7249b48a5993a0819d9e8bb8c7b.jpg

a0c819b9a0b0aab40e4688cfcb95c1b8.jpg

0a8914fb2527696bde82ef5ba28eca9a.jpg

 

So you guys may noticed that the deck is not caulked right? Well it's not that I forgotten it, but I didn't liked it that much so I descided to lay the deck without caulking it. After finishing the deck, I scraped the wood with a metal woodscraper. So i did not sandt the wood.

 

Further on I corrected the shape of the bulkheads at the bow of the ship. Later on a deck will be installed and that part of the ship runs at a specific angle.

 

76fcca45d446cb86263db70e73f89a06.jpg

 

b98323cacea983a6a926eb070b029e98.jpg

 

63efbed7bd4f47dc4ab21742259df33a.jpg

Now convinced the top of the bulkheads are correct, I started with placing some walnut veneer.

 

f51df1186a368bf99289388a0dc5df9c.jpg

eec06c844f7fe3ebe9a433911d40e190.jpg

 

43ff08873029384bed9f3efb211c51ca.jpg

 

e272a6dbf57a6a0231ffb1eef1493d12.jpg

 

63ec0dafda33d6e58dd18e4a7b2862be.jpg

 

So, after some scraping and cutting I continued on the false bulwarks...

 

3e5cc6093a78227f4d9eb92a39fda861.jpg

 

6f5ffb06440e13c56f3f76616a765581.jpg

So, I changed the "running" of the walnut strips by following the line of the deck instead of following the natural curve of the bulwark.

It took some effort, but I think this looks better.

 

 

4743533da3c1c97e1361dc6c3fb045b4.jpg4bd37c8d7ebca4a57ae71ca660dbe88f.jpg

b42c982fff0df0ffa3a1fa8abb6c94a2.jpg

 

c4aebe4ff5656aeb393a3a2a66ce5817.jpg

 

Okay, this was it for tonight. Until next update!

 

Peter

 

 

 

Edited by Katsumoto
Link to comment
Share on other sites

Goodday everybody,

 

A quick update on my buildlog. Thank you for the kind words and showing your interest in this log.

So, I planked the other side (inside) of the bulwark as well.

 

56884f8f6d038593db29c97035e9f1aa.jpg

bf3488970e2b50820c3ef9199b5ed0b6.jpg

 

773c8ea1155a552a615fba09e7939841.jpg

273868c33eb01c868d9ece8a4fd928b8.jpg

9bdc4b54e91617827d2a233d82a4f237.jpg

23152d8a1c4f14c3348b4083a2a49a66.jpg

So, I use a small block of wood to press against the other side of the strips. With my exacto knife I cut allong the side of the bulwark.

I did the same with the gunports.

 

c875b0c3f109bc3cbe0994130e2af46c.jpg

9c832ae0f94f7a1f9293eba516ff6230.jpg

02147320bde4b9cbe0c733ce4af580a9.jpg

So, the inside of the bulwark is now planked with veneer strips. Time to place the quarterdeck. First we need the plank the quarterdeck. Again veneer strips is used for the decking.

 

80a00bd8d90454a0a3d279e04b02a005.jpg

Placing the centerline...

 

e4cf58e3d30d1d0ca61351cb243b9977.jpg

Dryfitting it on the ship...

 

9d1e10e12f655acd7058ad225217d2d6.jpg

993c2a22c4b3cc56baf2d60462e42647.jpg

8f50a89018d5c1f5c311df8d7d5076d4.jpg

e109b44a43ad91586c8194186cfe5db4.jpg

2addeedf7435f8592eb10e59ced7f4f1.jpg

53d95e5d306ff262b02b0ee65a776436.jpg

399673b7063b65862b5e6670ec8839b7.jpg

1d8c8c2dd718aa111eb14a8851bef96c.jpg

05e9e86d9d47735d83aa99814a9450f8.jpg

860336cbf7fe97baa7c2e3f9ed0f82ca.jpg

b6afd44efac9d410a5860daadbfbf997.jpg

04f73572ed0c47cb54e7471d402b7b58.jpg

Until the next update, keep watching!

 

cheers,

Peter

 

 

 

 

 

Link to comment
Share on other sites

Hullplanking first layer...

 

Hello shipmates!

 

Today I'll show you some progress on the first layer of planking the hull. The second layer will be done with veneer strips.
I used the brass nails which were included with the kit. Normally I do not use these nails. However, I'm in a temporary house / home at this moment and most of my tools are in storage including all my clamps. So with only two files, pliers, hammer and a knife and some sandpaper, I'll need to pull this off...

 

3a78c560ab81f2782b82b534c59224e4.jpg

a32f8cfe78af0f5673c0a71833ce0ca2.jpg

c4eebef99034564c9b1fd2f4102125db.jpg

71f25a39b072bda7f1f3c6022bfb1f23.jpg

074b653edcfe36a479dcd974f7d18684.jpg

01076533339ecfec663b57f6a673c8af.jpg

e334edd44780e8f9b1849e22e46ddc24.jpg

6d913f250f07fe417ce64de4455f915a.jpg

a1edd86605a140a82be38bab31326e8c.jpg

bcf365100fa6b3b6c7f08c618c1af21c.jpg

d0504ceaacbc2a0fabf79c5207a3bf9f.jpg

568d0c7d0eb4f17b5c024783baf3ad0c.jpg

4841a2d7f1accbc248a1ee4f35bb8586.jpg

04ea962f4742004ba72ddb23ba6a0da0.jpg

479e1874c3a3f9190c0cb2899a3803ed.jpg

07f037e3367dd9ba03bf8dee24386c3d.jpg

And that's it for today,

 

ciao!

Peter

 

Link to comment
Share on other sites

Link to comment
Share on other sites

Captains cabin...

 

Hi Guys, hereby some pictures of the build of the captains cabin.

 

51d812b2ec26cfe4c11b386e324489d8.jpg

194b2fd49797337f88bd59571f029b17.jpg

0236a96f715f616943a74b21dfb91823.jpg

5fb91b11c2d0b8d6d64dcf0738a9b71e.jpg

4388009f2030d1938c4d2e7e679db1d5.jpg

So, by looking at the original windows at the stern of the ship....I did'n like the shape or size at all. After some time I descided to change them into a more suitable size of the time.

 

5620e0f1d4835f5bc461b14175002870.jpg

b60556ebe56be451d9e3a4af42fa0e6f.jpg

797d97304403b15ba609b2a327b4f930.jpg

5521469d3bcbffac73338009fc6b72b2.jpg

7af2c1ed2f5334375234e2649059a888.jpg

cff1b946a82caa4b50f3190dabf7e08d.jpg

039c43eb50ee2e375ddf64771ab4e17f.jpg

At this moment I had an idea. By changing the doorway and adding a window on the other side of the cabin, it's possible to look inside the cabin.

So instead of useing the metal parts of the door, I scratched a new one of wood by cutting out the door and window.

 

d7aa087c8a464f8a50915cfe59063752.jpg

e476b7acaf6c4d05613bd488dc7fb8b2.jpg

9815be7b0ac2b42b7b4f5a94a0e31b30.jpg

43e9766db537167c98751bd92630a05c.jpg

23847063b71ebb55133ffe46beba2f3e.jpg

So, after this it is time to place some veneer strips to the outside of the cabin.

 

3f066975fd4ef0ab7c8014cd1e75611a.jpg

2083825e206f8c6f2b75e33fe6f37717.jpg

78132068dd4f1fe7828c52451676ae27.jpg

3d042fb54bb57265af09d141c054e1c8.jpg

298298a703fb9b3c8ca572d7d4b43d47.jpg

349c741668922bb6146dc60d7859574e.jpg

d87469e60041fdf715b9ebb2691ea882.jpg

c67f1539008c8d1c7cdf3785a6ab7fbb.jpg

36b356ead9b3c7e6cedecface65f238f.jpg

bef0c1b0fed367871fb98b6f079df8ac.jpg

Also the inside of the cabin has to be done...

b25016a1b97445073168c4b470f62d95.jpg

316efd458176bc5df417314b5cf90b97.jpg

this was it for this time, until the next one.

 

Ciao,
Pter

 

Link to comment
Share on other sites

7af91d310ec792503b3c25be2b941570.jpg

e4959a7bf720981923d95891a4299907.jpg

7fd2be3528d9ff50881ff8403e132d8e.jpg

Where the green line is drawn, the wooden parts should stop by AL. I let them continue (red arrows) because it will be possible to look under the quarterdeck when the model is finished.

23dfdd4f6e3f6e288997651dcc63b729.jpg

Some beams and knees are made next...

a67b211b6075e7dba71b02a795c255ba.jpg

3fbc3c72799b6738e966e26efa459135.jpg

500dd1de072810be9f3099633418ee01.jpg

b34f17b1ce4e5b71127393f84f203f5a.jpg

bbe9e431642a1b18be1a12a19eef229b.jpg

092d297d8f1bca85dd712784d8aee46b.jpg

5ba854f206529d3d56fd5b5790c2764c.jpg

Back to the stern of the ship...

 

8cd54f22397156931a80539b0a8e45dc.jpg

d22115eb469f8830fb56fcda97081d01.jpg

4c16abd8b86941822f3e430d13df6878.jpg

e2419601b607a2b8fcf41d551873308c.jpg

b676eaa73e495ef09e539de244110d1a.jpg

7665223ae39952680767793f5ec1a693.jpg

7483ace751310ebbf23ac1e1f3405d30.jpg

1102fdbad42d48d8adf8513a4ed31ef4.jpg

cdd5c89e9ef8e78e5322e58d1bf452ca.jpg

b3c9de0cdd150c5832c3f069db2160b5.jpg

5fcb655d6c6c7fcee0cca6fef2e15a7b.jpg

1d70087e1cce30bf8f98b70f9238f95b.jpg

68b086414df84714b6dfe7bbcffb18b1.jpg

288246b094cbc6badb693e552b198333.jpg

94d0323755d1494d84f1b19cc7413115.jpg

8ba8d1a85f19835be047a83ce0fc2654.jpg

e089aab083112926a83aad51fb2d0321.jpg

7903cdbc02cb470709447a8c312a94b5.jpg

4d037b8f16858ead995fa29514195f6c.jpg

c18c2e5772227d68118eab8879594385.jpg

Until the next update,

 

cheers,
Pter

 

Link to comment
Share on other sites

The little details chapter...

 

So, this update is all about the details, big and small. Also it will give the ship some more character.
But first, the keel!

 

62e233fcfd49d103ed3ec93f739f2bc9.jpg

ec07565031c396c704f325da1c780612.jpg

8f9518130eba6b36e1b57f86cd932e0a.jpg

efaacc6fd402a2dff049247a6eb8c696.jpg

80d45767ee2590dedcc9c2aadaafb61c.jpg

2fa4006e2f97ba78adbb07853b802f0e.jpg

....after the keel, back to the stern....

 

91902b18fdcc94119029a563d010c935.jpg

f81cd6e8b480ce9b1f4a51f8881c6a4a.jpg

6243a0bbffeb581ac5175b7d3f34db82.jpg

6be1938bb0ae2fe006701a573e7ff46e.jpg

6b4e9fc35d2b5c40608bb943c0e4fd30.jpg

Time to place the "false wales". By this I mean, the first layer with veneer. On top of the veneer, the wales will be placed.

I used again a pencil to draw the lines were the wales should be positioned. 

 

743dce392b3deaa437cd0aef7909d4f2.jpg

I need a 3mm strip and I have only 5mm wide strips. (metric system). So I cut the 5mm with a knife and ruler into a 3mm strip. The 2mm strips was a leftover but I have a purpose for these as well...

 

b911a2b5e15f41fbf50ea1ed876cfd79.jpg

a1c89c864553d2d180d861f03fa00626.jpg

1c033aa511b246266bc7ea81e9f9bfc4.jpg

05082e3c22502de00a414263e0dd7e8f.jpg

015966a6389f50693b5ecda4b5bc7f78.jpg

2018ab4b9d387f15f6adef683e8c1414.jpg

649bee72c4e3dec03e9aa7cdc94707ff.jpg

5fdcede5ea385f22b167e45d7e72e7a7.jpg

So, the 2mm strips I use for the detailing, trim of the windows and door.

 

fc158d48c632136522e46c9225fe770e.jpg

d738eceda9a7b7933d6e8b2a7e92a2d6.jpg

c1396582ac8b46199834ff077978e13b.jpg

c63f6cdef372c96a828cbda8af78e958.jpg

7f7ba65bc41e6bbcbea6d0b45cc4605a.jpg

a85374e302cb0babf3b49abd1167eddd.jpg

920f895f4706db7f71c809f8e1a632f4.jpg

decae3f2a6d53219c51dc62e9db11b19.jpg

b13fd64b10f4734dabb2b247823ca28b.jpg

The wood is very thin and brittle, so I use some hot water to make the wood veneer more flexible and easier to bend.

e65a2fa392228f24be4fe9e7ad2cd0dc.jpg

2fda288b3b73cdf8aa550cdf717e9fab.jpg

c55a7cb64e1e4aa43a1fa99454fb65ca.jpg

a82c92384e731dea9882835ea174ae07.jpg

testing and dryfitting the door!

 

c8bbc52900d4809eb9302d4639a1fd18.jpg

9dd5fa42fc39a7b11ad7eacfd65e2bde.jpg

32d1f321881594243b5d5643f1116a78.jpg

I used a brass nail to make the doorknob and hinges...

86b62f0e3f18e66784f13aec2cf95696.jpg

fd5f671b1fbf71e0e8bc935fef4dd05a.jpg

b5c55e50c8a388c8b50db2b2b0cdcf93.jpg

Scratching is fun to do! 

 

Pter

Edited by Katsumoto
Link to comment
Share on other sites

Mistakes are made...

Hi guys and Galls, today I started at the front part of the ship and made a mistake. I haven't made up my mind if I correct it or leave it.
The mistake I made is the shiplap planking on the front of the ship. It's upside down...
A novice won't tell, but an expert will see the mistake.....what would you do?

 

c67fc817d44f7cf54173b19637c66188.jpg

c958b80e20854c4f78423939e048e2f2.jpg

dc8ac5fb678c8ab836a6b7077aad9c6b.jpg

78807c6a5b25620f27ad8c05e4019654.jpg

9ec16abb901ce774c8f7dd61281bb6a1.jpg

 

Link to comment
Share on other sites

42 minutes ago, Viggen said:

Very nice build to follow, I really like the additional details you are making! 

Hi Viggen, welcome aboard!

Thank you for your comment. highly appreciated! 

I try to do my best with minimal tools and maximum of creativity... ;)

 

These little details can make a big difference in the end....at least, that's what I hope for.

Edited by Katsumoto
Link to comment
Share on other sites

Hello!

 

Today I would like to show you the following progress on the Santa Maria. I start glueing the wales and the 2nd layer walnut strips on the outside of the bulwarks and a part of the hull.

 

a6d5cd423885b4eb5d35d855c0e9b8fc.jpg

c60bc284dcf15a5bb65eb3f1029e76bf.jpg

5d545bbd22ac1cd4f44309c1f8e175cf.jpg

c0cbc1da5a3580443d88bcd3750f9161.jpg

382225d7e8407a8ba74d3cedc4ba9392.jpg

c2b72cfdc98e235912956e06ef7276de.jpg

80f35b15df6407e8260899fdbb5f3073.jpg

04a8c38f1573ec38c1cabd97de9f7f86.jpg

939691e745728de674b455bb5db4ca90.jpg

72448753761b8a18ac5a9ef88806e658.jpg

After this, I started to work on the stern windows. I had an idea on my trip to Israel and came up with the following solution....

I used 0,5mm by 1mm strips to make the windows. It took me the whole evening to finish just one window...

So, one down, three to go!

2ae68a36378ab5f0b3a920ddc7f92430.jpg

0619d7b2d7b4cf10a3272706a676ab12.jpg

2151217b7b9dc16bbe09bdbb65d0d4cb.jpg

3ad791ac7115b77d2948e035205f2df8.jpg

to be continued...

 

Pter

 

 

Link to comment
Share on other sites

Hello guys,

 

Today I've finished working on the windows and would like to share with you the result.

I've taken a few shots while I was working on the windows. It will give you some idea how they are done.

 

2217e5a710e8f98d6d1fbb6efff4dbad.jpg

181ee95bfd1585d2dce8a2a2abf50813.jpg

b8b509c8e101692521b802e4fa9570f1.jpg

606490ee05705dd007606493a6b4ab59.jpg

I've also made some furniture for inside the captains cabin...

 

3c4628d0fd5a9876152bbcfe00e6f0a4.jpg

4f7882faf689b3fcab342a9188579d7d.jpg

Tried to make a shot through the door, but I just couldn't get it right....

 

0aacff33663ab71154a3d45cf61a341e.jpg

And ofcourse some pictures from the finished windows from the outside of the ship....

 

dd38b0dca360efea03bc8f5ad6468cd1.jpg

d8d9875a7a391cd67f9a9ff9b57bdd92.jpg

2a2f8fd31efb9a5b7fff6e0d157f48e0.jpg

 

And that's it folks, until the next update...

 

Cheers!

Pter

 

 

Link to comment
Share on other sites

  • 2 weeks later...

wales continue...

 

Hello shipmates,

 

Today I made some progress on the wales. Also some other small things but you'll see that in the following pictures.

Now I finished the wales, I can measure the distance between wale and keel on the bulkheads so I can calculate the width of my planks.

 

c7b550d2e8bbc05baad5f30fcb1da65f.jpg

bae1d7456529d25094b45a2cafef852e.jpg

b2291e2036549bc57c0142e88d21e665.jpg


On the next pictures the progress of adding the lower wales is shown...

f753377bf7943f847681d5610d6e1c2e.jpg

06736c35c7c701d1deac3fc7791e63e5.jpg

baa7dae2f4a2187907c4de5abd62e1b7.jpg

Just some steps of the progress of planking between the wales on the other side of the ship...

419dae7a461d18e6840a0251a82181f4.jpg

63e2c256b9f7037455b6ef95ad87b0c2.jpg

bbaf648b2d61a7dff39e2f7a439618de.jpg

1475e7c21faef5412cbecfb0d31be0cb.jpg

c3641df1f3fd0ebdd298c762563b2388.jpg

90cc8884bae14a9f2bb2c97a04068d4b.jpg

Some progress on the stern...nothing fancy just basic construction work...

3b423a858e3146d8e9023ec2114e65b9.jpg

95a70c31a2040606790708e26d80428e.jpg

So, a lot of close-up pictures. Next steps is to finish the stern a little bit and start with the second layer of the hull...The last one will be an exciting one I hope... 

 

regards,

Pter

Link to comment
Share on other sites

Calculations, measurements, again calculations and again maesurements...

 

Hello everyone,

 

Today some progress on the quarterdeck, sterncastle and my measurements of the hull so I'll be ready for the planking job!

First the quarterdeck, I've put a "beam" into place...

 

ae6c9bc7645b01e135731f453066aeb7.jpg

 

e62f260b23e6606a7987a5f8b47c765c.jpg

 

8208dd4195b698821bfa40ef67fb01b8.jpg

 

After this I went back to the sterncastle of the ship. I soaked some wood in warm water and used a jig to bend the wood in the desired shape.

 

b266c2d12fe4c0e01e56b5a2d6f5a17f.jpg

 

24f3e201937425b7ed3cf9568a784777.jpg

 

I've placed them against the ship (red arrows) with some other items as well. 

 

a48ac5a4ba6728c223a53d1a1945e7ec.jpg

 

In the next pictures I made an opening so the rudder can be moved from inside the ship

 

08d33f5244ff6a9a128978cbd3fffbad.jpg

 

96b9bc372acd6332ee47b73b18d359ec.jpg

 

9ee9eea69cb961e57343bdbd0e00e5ba.jpg

 

391de6f98c2c4d8c372228f54f826a6e.jpg

 

5f5d2891b6c5ffa6ba667d30a5020b32.jpg

 

fc50cd6d46f5bfcaba577f73e40422ba.jpg

 

645263ad954118441de97fe92b2f0e98.jpg

 

3c12e9c7e79fd8fbb8a7074e769eab73.jpg

 

c29c769303f81d164ba82c3bcd3f06b6.jpg

 

3e76594b1724ca9737c322f50d9bd7da.jpg

 

Some nice views inside the ship...

 

b3f6be567f09eb130ad5ffad2396ffe0.jpg

 

2621eaf9751df49a88f569963a6bc9ef.jpg

 

So, the next part is an important one. I've made all my measurements and done my calculations on how to plank the hull.

I devided the hull into 4 equal parts / sections, which contains 4 planks per section. After checking everything I drawn the lines on the hull.

With this method it should be possible to do the planking job without stealers. Fingers crossed so to say...

 

 

11522d522f6042b7a6e26f3b38e9091c.jpg

 

205ffe59d9e1c242e3fe76b971cd5ffc.jpg

 

As a preparation I cut 2x 17 strips of veneer into 12cm long planks. In total 136 plank of 12cm.

These will be my planks that I'll use on the hull.

 

746d1723c4b64aa1fe07cf30aa860dcb.jpg

 

4f6aa42c0dd75887c17d822811fe84d2.jpg

 

putting the planks I've cut aside. I needed to finish the bulwark part on the front section of the ship. These planks are placed in an angle because of the weard shape of this section of the bulwark.

 

261a1ded48f81a074e76f8938245e743.jpg

 

27c34c90456df178701dacf5f12b8cf6.jpg

 

c98d1b5c74b0dd786c22673573acdd17.jpg

 

e53dcc50afc24d2a88c60f59af01f109.jpg

 

I need to do the other side as well, but that will be for the next update.

Good night!

 

Pter

Link to comment
Share on other sites

  • 2 weeks later...

***Hullplanking part 1***

 

Hi friends,

 

I would like to share my progress so far on the second layer of hullplanking. 

As mentioned in my previous update, these are my preperations before I start with the planking job. 

I've done my measurements, and drawn the lines on the hull.

 

205ffe59d9e1c242e3fe76b971cd5ffc.jpg

 

11522d522f6042b7a6e26f3b38e9091c.jpg

 

I have cut all my planks in the same length..

746d1723c4b64aa1fe07cf30aa860dcb.jpg

 

4f6aa42c0dd75887c17d822811fe84d2.jpg

 

 

085bcaa98f3ddd645fcfdc521677f0cf.jpg

 

01eb86ffca277a381b3a3b639b34a339.jpg

 

5cf4b56a3316a07a5cd0597d9959c8ff.jpg

 

So I repeat the proces until I reach the first line!

 

ff492fde90ba478f3261e45262221d32.jpg

 

8f06847593add44b52f2c4cc8fdb1886.jpg

 

409ccd38a7185038f417383e20242b71.jpg

 

cdbaa358cc2b46c99628d0143cd07692.jpg

 

d2f9b00cd300960d1e5e6361ef68880c.jpg

 

0c97576a19b1f674230ac6a614c5ee85.jpg

 

592f7ad5cae30fef6a13a46e4b2efb6c.jpg

 

5ec78e070d27ce00329881b6b53a70a9.jpg

 

1670f513e1cae8312dcc1094ce934d77.jpg

 

8dbcb914fd76b47f9d9193f554b38dc7.jpg

 

f1ee07939960942ce6a1303592d7b48e.jpg

 

b63c8a1e85dec937221a48f38ec92486.jpg

 

f3822f86346c0bb72d20387a4e3bc159.jpg

 

5044337ad339e32f9f320fbe867bd16e.jpg

 

aa58975c5132d611254fc5c394109a9f.jpg

 

d2d75cd23d08aec88e839567361d7f40.jpg

 

f78e2a59927da587879cae49a1eb4250.jpg

 

e9d423bf1fb96b74d9aa54e374326418.jpg

 

98d5cd5c11cb9bacf1ca8d71c20dfbf5.jpg

 

c33f4f8e08cee18195c6d74954198604.jpg

 

2cb8d76ef96df2dabdcca4308e060eed.jpg

 

14defa621d7f1b3eec5dc7149d2743f6.jpg

 

333943c0179ec2bfd22cc287666ab6e7.jpg

 

af9e5b463b68178783af788aff2210af.jpg

 

9a2ba1394674a609732531d7ee410ed2.jpg

 

dba6c518c57743924bac88b5d2183ed3.jpg

 

12c6f5676e93169c53c72c725465f468.jpg


So, the first part is done!

 

55c34bdd282d58b826b00e74d4864a61.jpg

 

5c4e45195fcad3b00afc3c3295ad82ad.jpg

 

a0e1c60d3549f14594673e1f3da255a3.jpg

 

1f8462d92baa6e70c356860c8842d215.jpg

 

a7cad67ca555faeec56c7cc32f93cfda.jpg

 

6e0976fb27283825a6635f91da2ce1a3.jpg

 

So no stealers were used or were necessary. :)

Now I need to copy this on the other side to complete the hull. This is for the next update.

until next time, take care!

 

Pter

 

Edited by Katsumoto
Link to comment
Share on other sites

It’s not a very difficult ship to make actually. As a first or second build I even recommend it! Because of the double planked hull you can practise on the first run and correct mistakes on the second run. There is not much rigging, only the basics you need to learn anyway. It is a pretty straight forward build. 

 

thanks for your reply, really appreciate it!

Edited by Katsumoto
Link to comment
Share on other sites

Very good job Peter. I tried to build Santa Maria last year as well. You can check if you want. May i ask which method you are using for tapering the strips at the bow? Do you cut or sand them? Thanks.

Edited by mtbediz
i made a mistake. Missing word.
Link to comment
Share on other sites

3 hours ago, mtbediz said:

Very good job Peter. I tried to build Santa Maria last year as well. You can check if you want. May i ask which method you are using for tapering the strips at the bow? Do you cut or sand them? Thanks.

Thanks, I cut them with a knife along a steel ruler. Works very well. I didn’t know others like yourself already build the SM, I go and look into your log for sure. :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...