frankwil Posted November 5, 2018 Share #1 Posted November 5, 2018 Is it an acceptable practice to make a garboard strake for one side, and trace/duplicate the same to flip over and use on the other side of the keel? Quote Current Build: HMS Beagle 1/64 https://modelshipworld.com/index.php?/topic/19447-hms-beagle-by-frank-williams-mamolidusek-164/&do=findComment&comment=593563 Completed Builds: Midwest Dinghy Occre Bounty Longboat Link to comment Share on other sites More sharing options...
russ Posted November 5, 2018 Share #2 Posted November 5, 2018 Ideally, that would be the way to do it. However, please check the other side against your pattern to make sure it is exactly the same. It would not be unusual for there to be some differences from starboard to port. If your garboard pattern works for both sides, you are doing excellent work. Russ frankwil and mtaylor 2 Quote T'aint a hobby if you hurry Completed projects Cross section model by Russ 1/48 scale Biloxi schooner model restoration 1/24 scale Biloxi oyster skiff 1/24 scale Biloxi schooner 1/48 scale POB Current project Biloxi lugger Captain Roy 1/48 scale POB Link to comment Share on other sites More sharing options...
frankwil Posted November 5, 2018 Author Share #3 Posted November 5, 2018 Thanks Russ. I have temporary battens on both sides to measure for the GB, so it should be easy enough to verify. Frank mtaylor 1 Quote Current Build: HMS Beagle 1/64 https://modelshipworld.com/index.php?/topic/19447-hms-beagle-by-frank-williams-mamolidusek-164/&do=findComment&comment=593563 Completed Builds: Midwest Dinghy Occre Bounty Longboat Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.