Jump to content

HMS Bellona 1760 by SJSoane - Scale 1:64 - English 74 gun, as designed


Recommended Posts

Hi everyone,

 

To get started again, I will post again the photos I took of the original Bellona model at Chatham last year, with permission from the National Maritime Museum. This model is contemporary with the original design of 1760. The Bellona was rebuilt in the 1780s with some significant changes in port locations, refitted rail on the poop, etc. I prefer the look of the original, and so these photos of the original model are my roadmap through the project.

 

It will take me a while to summarize my own build starting with my re-drafted drawings at 3/16" scale, but I am committed to the task!

 

Best wishes,

 

Mark

 

 

 

post-477-0-81368000-1361030991_thumb.jpg

post-477-0-29439700-1361031012_thumb.jpg

post-477-0-07270600-1361031022_thumb.jpg

post-477-0-40037600-1361031031_thumb.jpg

post-477-0-87553800-1361031040_thumb.jpg

post-477-0-78306700-1361031049_thumb.jpg

post-477-0-95082200-1361031059_thumb.jpg

post-477-0-30885000-1361031068_thumb.jpg

post-477-0-25983700-1361031076_thumb.jpg

post-477-0-30032100-1361031087_thumb.jpg

post-477-0-09647100-1361031098_thumb.jpg

post-477-0-37733100-1361031109_thumb.jpg

post-477-0-28745300-1361031122_thumb.jpg

post-477-0-47622100-1361031137_thumb.jpg

post-477-0-51556500-1361031150_thumb.jpg

post-477-0-59786700-1361031166_thumb.jpg

post-477-0-69379600-1361031178_thumb.jpg

post-477-0-87947600-1361031188_thumb.jpg

Link to comment
Share on other sites

Glad to see you back!

 

 I got hooked on MSW thanks to your Bellona like two years ago when I was attempting to build it out of the AOS book.

 

Regards.

 

Daniel.

Link to comment
Share on other sites

Hi everyone,

 

And here are the drawings I created from the Admiralty draughts of HMS Dragon, The Bellona's sister ship (the NMM could not find the Bellona drawings when I ordered these back in the 1990s; I don't know if they ever turned up).

 

The xerox copies showed that the original 250 year old drawings were quite distorted and therefore not able to be built from. Also I did not know how I would ever fit a 1/4" scale model of a 74 in my house. So I drew these at 3/16", or 1:64. The Admiralty drawings were very schematic, and so I had to develop all of the details from other standard sources.

 

Mark

 

 

post-477-0-83839600-1361032090_thumb.jpg

post-477-0-20632900-1361032098_thumb.jpg

post-477-0-80241700-1361032104_thumb.jpg

post-477-0-77668300-1361032111_thumb.jpg

post-477-0-77318500-1361032122_thumb.jpg

post-477-0-29301200-1361032130_thumb.jpg

Link to comment
Share on other sites

And now starts the long climb to re-earning my Lieutenant Commander rank.....;-)

 

Mark

Yepper, we all newbies ones again as Anja said.

Glad that your log is back and that you again will share your very precise work with us.

Happy modelling!

Håkan

__________________________________________

 

Current build: Atlantica by Wintergreen

Previous builds

Kågen by Wintergreen

Regina by Wintergreen

Sea of Galilee boat, first century, sort of...

Billing Boats Wasa

Gallery:

Kågen (Cog, kaeg) by Wintergreen - 1:30Billing Boats Regina - 1:30Billing Boats Dana

Link to comment
Share on other sites

 

Hi everyone,

 

Here are old, not very good photos of early construction, Hahn style. Cutting it off the base and flipping it over after years upside down was a thrill and also very scary.

 

Mark

post-477-0-27029300-1361042200_thumb.jpg

post-477-0-31063400-1361042208_thumb.jpg

post-477-0-55558300-1361042215_thumb.jpg

post-477-0-78257200-1361042223_thumb.jpg

post-477-0-56706300-1361042231_thumb.jpg

post-477-0-24168000-1361042241_thumb.jpg

post-477-0-84770100-1361042248_thumb.jpg

post-477-0-48712700-1361042256_thumb.jpg

post-477-0-69543300-1361042263_thumb.jpg

post-477-0-57642900-1361042271_thumb.jpg

post-477-0-84435900-1361042278_thumb.jpg

post-477-0-32326600-1361042286_thumb.jpg

post-477-0-41491800-1361042293_thumb.jpg

post-477-0-87675600-1361042302_thumb.jpg

post-477-0-94330400-1361042313_thumb.jpg

post-477-0-23482800-1361042322_thumb.jpg

post-477-0-48310700-1361042330_thumb.jpg

post-477-0-62626000-1361042339_thumb.jpg

post-477-0-49927400-1361042348_thumb.jpg

post-477-0-36692300-1361042356_thumb.jpg

Link to comment
Share on other sites

Your work is so precise it is scary...

Happy modelling!

Håkan

__________________________________________

 

Current build: Atlantica by Wintergreen

Previous builds

Kågen by Wintergreen

Regina by Wintergreen

Sea of Galilee boat, first century, sort of...

Billing Boats Wasa

Gallery:

Kågen (Cog, kaeg) by Wintergreen - 1:30Billing Boats Regina - 1:30Billing Boats Dana

Link to comment
Share on other sites

 

Thanks, Daniel, Hakan and Joe.  This is like a forest fire; it clears out the old underbrush and leaves room for a fresh start with a clean sequence of the most interesting photos!

 

Mark

Link to comment
Share on other sites

Great to see your log back Mark - it's always been a treat to follow your progress.

Link to comment
Share on other sites

Thanks for getting your log up again so soon, Mark. Thank also for the NMM photos. Were they taken by you in a private showing? I hadn't notice the trundelhead carving before. It's quite lovely. Equally impressive are the perfection of your fillers between the frames. Have you noticed any expansion or contraction of any joints? A few of mine popped open when I took the hull from my climatically stable workshop to a warmer part of the house.

 

Greg

Greg

website
Admiralty Models

moderator Echo Cross-section build
Admiralty Models Cross-section Build

Finished build
Pegasus, 1776, cross-section

Current build
Speedwell, 1752

Link to comment
Share on other sites

 

Thanks, Mark, Remco, Grant and Greg.  It has been fun going through the photos to tell the story in sequence, without extraneous stuff.

 

Greg, I arranged with the curator a private showing of the Bellona when I was last in England. It was in January when the exhibits were closed at Chatham, which helped. I understand the Bellona model has pride of place in one of their exhibit halls.

 

The "breadboard" style after the old Admiralty models has caused significant movement in the hull with the season changes, because of the cross grain construction. Colorado can go from 12% to 70% or more. I used to live in house with a humidifier which kept things constant. But the new shop has no humidifier, and the hull regularly opens up a joint here or there in the winter. It used to cause me some distress, but everything stays in place when summer comes around again. I guess this worked better in England, when the humidity was uniformly high.

 

If I had life to do over--or maybe for the next model--I would frame like your's and David Antscherl's system. The space between frames allows expansion and contraction longitudinally, without stressing the longitudinal members like the keel.

 

Best wishes,

 

Mark

Link to comment
Share on other sites

Great to see your log back Mark. Tour clean workmanship is inspirational.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Mark,

You made that capstan look easy this time around.... :D

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

That's a very clever round up jig for the gratings. I assume you've rubber cemented sandpaper inside?  I'm going to steal that one. Also, do you make your coamings and head ledges to fit your gratings or do your gratings always fit into the assembly with perfect, full rows? Can't just be dumb luck every time!

 

Greg

Greg

website
Admiralty Models

moderator Echo Cross-section build
Admiralty Models Cross-section Build

Finished build
Pegasus, 1776, cross-section

Current build
Speedwell, 1752

Link to comment
Share on other sites

JIG QUESTION.
 

Good Morning Mark!



Now that we´re all re-starting the logs can I ask you to explain how you built the second Jig.

 

The one made like Ed did.

 

If you could make a sketch on paper it would be fine. I am wondering about theclamps inside that blue aluminum rail. The bridge is a great to meassure distances, deck beams, gun ports...



Thanks.



 

post-87-0-19625100-1361098209_thumb.jpg

Link to comment
Share on other sites

 

Thank you, Michael, John, and Elia for your encouragement. It really helps keep me motivated.

 

Greg, I looked for a photo of how I made the grating sanding jig, but can't seem to find it. I'll keep looking. Yes, there is sandpaper underneath, but only exactly to the edge of the grate. There are little runners on each side that bottom out on the lower part of the jig once the right depth is reached. I made the profile of the sanding surface by gluing the profile on the end of some maple, which I then ran across the routing table with a piloting bit. It shaped the entire surface of the maple block with the right profile.

 

In image #17 in the background you can see the calculations I made for each grating, where I attempted to calculate the exact size of the parts for each grating so it would be a perfect fit within the coaming. But I more recently put the other gratings in place on the deck, and something isn't lining up yet. I may have to do those over. It wouldn't be the first time for me that very careful calculation nonetheless got it wrong...

 

I have attached an image of the Bellona model looking through the quarterdeck onto the upper deck, which shows a couple of gratings that were imperfectly fitted to the coamings. Maybe they took those from an earlier model and made do, or maybe that is how they really worked. Most of the rest seem to fit better.

 

Harvey, I am not sure which jig you would like to see. I have attached some photos of the bridge for measuring, and how I used it for transferring heights inboard and outboard from my drawing. I took the idea of the track and the bridge directly from Ed.

 

The little blocks in the blue track I used for help in cutting beams so that the center of the made-up beams always aligned with the center of the hull, using the proportional dividers. But right now, I can't remember why I needed the blocks when I could just use the dividers. I'll remind myself when I start making the beams for the upper deck.

 

If you let me know which jig you are interested in, I would be very happy to make a sketch!

 

Best wishes,

 

Mark

 

 

post-477-0-31682000-1361110702_thumb.jpg

post-477-0-27620700-1361110721_thumb.jpg

post-477-0-83221300-1361110722_thumb.jpg

post-477-0-63075600-1361110724_thumb.jpg

post-477-0-25838000-1361110726_thumb.jpg

Link to comment
Share on other sites

Mark, since MSW 2.0  is on the road again, I have missed your great building log. Your precise work is a big inspiration for me.

Regards Christian

 

Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36

On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777

Paused: HMS Triton, 1771 - 1/48

"Have no fear of perfection - you'll never reach it." Salvador Dali

Link to comment
Share on other sites

Hello Mark,

 

I have attached a pic that illustrate my question about the, I´m going to call it "blue jig". Can you post the pic about the clamp, how you put it into the board...etc.??

 

 

That is the one I´m wondering about. The blue rail one

 

 

Daniel.

post-87-0-33719500-1361275871_thumb.jpg

Link to comment
Share on other sites

Hi Mark,

 

Going through your reposted pics is like going down memory lane.

 

Ed

Link to comment
Share on other sites

Wonderful. It's really fascinating to see the build of your model again.

Regards Christian

 

Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36

On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777

Paused: HMS Triton, 1771 - 1/48

"Have no fear of perfection - you'll never reach it." Salvador Dali

Link to comment
Share on other sites

 

Thank you, druxey, Christian and Ed. All of this re-posting is allowing us to see all of the builds afresh! Ed, I will be particularly happy when we have your index again. I used that fairly regularly.

 

Daniel, the blue track idea comes from Ed, and it is made from components purchased at Rockler Woodworking. All of the parts for the track and the tightening bolts and knobs are already made. The link to the site is:

 

http://woodworking.rockler.com/c/jigs-jig-its-t-tracks

 

I recall that I used a router with a bit exactly the width of the track, using a fence on the router to keep it parallel to the sides of the building board. Once the grooves are cut, the tracks are very easy to screw in.

 

The bridge was a little trickier, because it wants to be exactly right angles to the building board, and have some way of lining up with the station lines of the plan on the board. Ed developed one idea, and I tried a slight variation that I showed in the previous pictures. Ed, are you able yet in your re-posting to link to your bridge design?  I recall Ed has an way of fixing his camera to the bridge, which I want to try someday.

 

The final complexity was to get the top of the bridge to the building board surface to be exactly the same distance as the top of my board with the section drawing pasted on, to the bottom of the keel. That is so measurements taken off the board with the drawing will exactly match the same height on the actual model measured from the bridge. I hope the photos explain this well. If not, I'll do a little drawing of the arrangement.

 

Best wishes,

 

Mark

Link to comment
Share on other sites

 

Daniel,

 

Many apologies, I forgot to post the picture of the measuring device on the board with the drawing. Here it is:

 

Mark

post-477-0-73195000-1361332409_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...