Jump to content

Santa Maria by luponero - FINISHED - scale 1/50 - carrack - from diagrams of Adametz


Recommended Posts

Un po' per curiosità, un po' per passione condivisa con tante persone, provo ad aprire questo wip su questo sito, (non so se la scrittura in italiano, l' unica lingua che conosco "abbastanza" bene, provocherà dei problemi per comunicare con gli altri, ma proviamo a vedere cosa succede, io ho messo il traduttore in automatico... vediamo se potete farlo anche voi )

 

si tratta della costruzione della caracca Santa Maria,  forse uno dei modelli maggiormente realizzati da quasi tutti i modellistici, i piani di costruzione sono allegati nel libro " Le navi di Colombo" di Heinrich Winter,  si tratta di un sei tavole in scala 1/50 nel quale viene riportata la "caracca" (nao) di Cristoforo Colombo,
o almeno, uno dei tentativi di riportare, come doveva essere la "nao" di Cristoforo, con la quale nel 1492 attraverso l' oceano Atlantico con l' intento di scoprire le Indie.....
altro libro che ho e nel quale vengono riportati altri esempi di disegni sulla caravella è "The ship of Christopher Columbus" di Xavier Pastor,IMG_3293_2_1.JPG.791cbc0a9b511df48ce096d2b98f90e0.JPG

il libro di Winter lo avevo da diversi anni, ma non ero particolarmente attratto dal modello, uno tra i piu' classici modelli, e per di piu' di una nave "tonda"
cosa che non lega o meglio legava con il mio gusto, perchè fino ad oggi avevo realizzato modelli di nave "lunghe", ma c'è sempre una prima volta...
anche perché la realizzazione della caracca non è particolarmente complessa e questo modello mi permette di ripartire con la realizzazione di un altro modello in un periodo nel quale ho poco tempo, 
per cui la decisione di partire con questo modello è stata presa non tanto per la realizzazione stessa, ma per il "bisogno" di ripartire,,,
per cui mi sono messo a guardare le tavole realizzate da Adametz, 

IMG_3292_2_1.JPG.2e45f36830268e61e79c9faf68cf38a1.JPG

nelle quali viene riportato anche la costruzione di un particolare "scaletto" per la messa in opera delle ordinate sulla chiglia e il fasciame, cosa che ho realizzato scrupolosamente, e che non avevo mai trovato in altri piani costruttivi

IMG_3297_2_1.JPG.7aa60f387e1f2fbac0f4e3092fdbe62a.JPG

in pratica sullo scaletto verrà realizzata in maniera "capovolta" la parte iniziale della realizzazione del modello, con le ordinate che andranno ad aderire alle battute riportate sullo scaletto, almeno l'intento dovrebbe essere
questo.......vedremo

 

saluti a tutti

 

luponero

 

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

Hello Luponero,

Could you translate your posts into English as it is the language of this forum?   Thank you.

 

Ciao Luponero,

Potresti tradurre i tuoi post in inglese poiché è la lingua di questo forum? Grazie.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Un po 'per curiosità, un po' per passione condivisa con molte persone, cerco di aprire questo wip su questo sito, (non so se scrivere in italiano, l'unica lingua che conosco "abbastanza" bene, causerà problemi per comunicare con gli altri, ma vediamo cosa succede, metto il traduttore in automatico ... vediamo se puoi farlo anche tu)

 

si tratta della costruzione della carovana di Santa Maria, forse uno dei modelli più realizzati da quasi tutti i modelli, i piani di costruzione sono racchiusi nel libro "Le navi di Colombo" di Heinrich Winter, è un sei tavoli in 1 / 50 scala in cui viene riportata la "caracca" (nao) di Cristoforo Colombo,
o almeno uno dei tentativi di riportare, come dovrebbe essere, la "nao" di Cristoforo, con cui nel 1492 attraversò l'Oceano Atlantico con intento di scoprire le Indie .....
un altro libro che ho e in cui sono riportati altri esempi di disegni sulla caravella è "La nave di Cristoforo Colombo" di Xavier Pastor,

IMG_3293_2_1.JPG.b868d345ffccaee548fb1740427c220e.JPG

Riporto seguendo la traduzione, senza inserire le immagini, sperando che il traduttore funzioni bene ....

 

 

Il libro di Winter ho avuto per diversi anni, ma non ero particolarmente attratto dalla modella, una delle modelle piu 'classiche, e inoltre' una nave "rotonda"
qualcosa che non si lega o si lega meglio con i miei gusti, perche fino ad oggi io avevo realizzato modelli di navi "lunghe", ma c'è sempre una prima volta ...
anche perché la realizzazione della caracca non è particolarmente complessa e questo modello mi permette di ricominciare con la realizzazione di un altro modello in un periodo in cui ha poco tempo,
quindi la decisione di iniziare con questo modello è stata presa non tanto per l'implementazione stessa, ma per il "bisogno" di condividere, "
così ho iniziato a guardare i tavoli fatti da Adametz,

 

...............................

 

in cui viene anche riportata la costruzione di una particolare "scala" per l'attuazione delle ordinate sulla chiglia e della placcatura, che ho eseguito scrupolosamente, e che non avevo mai trovato in altri piani di costruzione

IMG_3297_2_1.JPG.4f0e1c9de5dedafe2958a7a05eeb2867.JPG

 

 

in pratica sulla scala si realizzerà in un "sottosopra" la parte iniziale dell'attuazione del modello, con le ordinate che aderiranno ai gradini della scala, almeno l'intento dovrebbe essere
Questo vedremo ... ....

 

La realizzazione del modello continua con il metodo delle ordinate per fare queste ho usato lo scanner e il programma di fotoritocco riportando sul compensato 6mm i telai superiore e inferiore,

IMG_3301_1.JPG.243c8f0d92b44ca756f592df1f1f25f0.JPG

IMG_3302_1.JPG.aae3bfe4c42496a4b4e80ad44505106a.JPG

presente anche il fedele amico "Argo" (come il cane di Ulisse famoso personaggio dell'Odissea)

IMG_3300_1.JPG.e1f3a2380aee5ce404d7289227716285.JPG

per la realizzazione del modello ho usato il legname che ho trovato nella zona in cui vivo (le colline del Mugello, vicino a Firenze)

il noce, la ciliegia
la noce e la ciliegia sono le piante che avevamo nella fattoria di casa, il noce è il mio preferito, sia per le "sfumature" che per la lavorazione stessa,

non paragonabile con la noce che si acquista nel negozio e ciò che viene utilizzato nelle scatole di assemblaggio

IMG_3303_1.thumb.JPG.3fd57c60458702ef6562665195cfe090.JPG

IMG_3305_1.JPG.98102c1d913e72e4e04ffe50c451ce83.JPG

 

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

Unfortunately in the translation something was not successful, I try again to see if you can insert the text in English

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

I apologize to the readers, my poor practice with the use of the translator and the "automatic" translation of the site to the fact that even the previous parts are in Italian, let's see if I can now correctly "set up" the program ,

in the parts before this I illustrated the type of wood used for the construction of the model: walnut, cherry later oak
timber I found where I live (hills of Mugello, near Florence) and which has my opinion, this timber is better than the one found in the building boxes and in the shops for modeling

 

we hope that the translator works well ...

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

it seems that the translator has started doing his job, we hope well ...

the images that I insert and the description of the works, are not in "real time" I will try to recover the situation to get an update

of progressive work

after choosing the essences to be used, I cut and assemble the keel
with walnut

IMG_3306_1.JPG.8f359a656dd769cfb88b52d2ceadda60.JPG

IMG_3307_1.JPG.a53ea4b6c69d4649404b7f7baf8cbaa4.JPG

to reinforce the keel, I inserted a part in "beech"

 

I brought back the reinforcements of the bow and stern wheels

IMG_3308_1.JPG.6b771891e6c284f4f62177856b28928b.JPG

IMG_3310_1.JPG.40dc9a9e823e3e8c56c46815cf915e25.JPG

 I started to put on the keel the ordinates made to have a more stable construction I had built a "ladder" (as seen in the photos above), which is not that shown in the attached planes, I made it to prevent the keel from coming distributed on the structure avoiding deformations that could derive from the thickness of the keel, (very small) while the upper and lower ordinates
they are 6mm thick, and very heavy

IMG_3311_1.JPG.36e3e906621bb6f551c9a003837e751d.JPG

IMG_3312_1.JPG.634dded3135dec01771a5c59006103a4.JPG

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

later I started assembling the upper and lower frames, following the method shown in the construction plans, joining them together with strips fixed with nails and positioning them on the ladder made as indicated,

IMG_3315_1.JPG.8f747df6342723deb959739d036d9de9.JPG

IMG_3317_1.JPG.30b6a80d280b13716cc2b0f59960880e.JPG

I was not very convinced of the structural part of the construction,

the ordinates seemed to me too heavy compared to the keel, in my opinion, Adametz,

IMG_3322_1.JPG.439a27ac64a175ecddfe674c1676457b.JPG
that has realized the construction plans bringing back also in the same supports for the realization, realizes a very fragile keel, that subsequently strengthened by making some modifications

 

in the original design, the ordinates have an opening in which the keel is inserted, which due to its small size, has no joint to bring the ordinate, then I made an additional piece that I stopped on the keel reinforcing it considerably and realizing the joints where the ordinates are blocked,

 

IMG_3325_1.JPG.c3a1f7b8b284b58988a551889e7f29bf.JPG

IMG_3326_1.JPG.7f2d83dc440ac02a96df5a100bd7d8db.JPG

"not beautiful" solution but it certainly reinforced the structure considerably

 

 

IMG_3317_1.JPG

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

after placing the ordinates on the keel (without gluing them) I started to try the "sleepers" which are the internal horizontal beams

(I do not know if the terms used for the structural parts will be translated into the correct form)

I try to follow the part reported in the construction plans of Adametz, even if I am not very convinced of the final result

IMG_3327_1.JPG.847312a537b09b0e2262cd7c8e9ca062.JPG

IMG_3329_1.JPG.51ce97572ce3413a82013561f146379c.JPG

IMG_3332_1.JPG.e2b1c179bfa7f56097adceb4dfb893be.JPG

IMG_3334_1.JPG.f2181e7084632cc2eef78ec34e1251b1.JPG

after trying the ordinates on the keel with the "sleepers" (the horizontal girder "I have reported the structure on the" ladder "

and I started making the first plating, using cherry strips of 5 mm and 2 mm thick (this is a cherry tree that I had to break down two years ago and with which I made some boards that I use to make the models naval)

I have no initial images of the laying of the planking (at that time I did not have a camera) so I insert images in which part of the planking had already been realized

IMG_0180_1.JPG.69bacad78f799c700bec3c10f3ff7c2d.JPG

IMG_0375_1.JPG.67062bf5a7f2d397d7d802a7dbfb3387.JPG

 

IMG_0379_1.JPG.04977aa8939eb66258dec9fc42112e20.JPG

finished part of the first plating, I removed the model from the ladder to continue with the plating and finish the upper parts

IMG_0387_1.JPG.40d8f45dea0aa0b89c7653280fe4b1e1.JPG

IMG_0395_1.JPG.087b2b031b008dbd00f7323772d02b5c.JPG

IMG_0397_1.JPG.90758078a4b3ec538c5595d29aac9085.JPG

using the abrasive paper (80) to smooth the plating

 

for tonight (in Florence it is 24.06) I finish here, trusting that the "translator" has done a good job

regards

black Wolf

IMG_0396_1.JPG

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

Translator is working well and your ship is looking good.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Thank you Mark, I'm glad that the translator works well, soon I will report other works done,

I enjoyed the opportunity to wish you a Happy New Year

black Wolf

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

after finishing part of the first plating I worked on the tagliamare making it in walnut and preparing the bowsprit for bowsprit, then I stopped the piece by drilling holes and making wooden "nails"IMG_0494_1.JPG.2a3f35d41f8d51962706729b7a2e2ee9.JPG

IMG_0495_1.JPG.2234e8240217bcf6610d92057df1945c.JPG

the nuances of the walnut colors give a very pleasant effect

IMG_0499_1.JPG.9f0b03f7b9965d7f55a2620e492dc4be.JPG

to make the structure more resistant I made small pieces of cloth (raw linen) I soaked them in the glue, and I put them between ordered and hardy making them adhere to the battens, this metedo, as well as making it more resistant the structure should keep more stop the strips avoiding to create the openings between the strip and the strip

IMG_0505_1.JPG.89ee11bb5ea64aadffa5f7f3b2d9bba6.JPG

IMG_0509_1.JPG.5fe4ffb9df7c19c4c7a8c4c36db2763d.JPG

After the strength of the structure, I started working on the main bridge, after having reported the profile of the bridge shape on a 1 mm plywood, practicing the hatch openings and the "anchor hawser well",
to make the plating boards I used oak wood, making three length measurements (showing them in 1/50 scale)

I painted the edges of the strips of black, to imitate the "caulking" (waterproofing technique of the wooden hull)

IMG_2124_1.JPG.ea2a6d33fd1f80db0b1fd7911bb0f4e0.JPG

IMG_2126_1.JPG.8e5cffb5ea214aca300ce5bf9d94481e.JPG

to make a correct "insellatura" (it is the longitudinal projection of the edge line, that is the intersection of the bridge with the walled side.) I had to put some pieces of strip on the false bridge, near the bow

in the division of the strips, I avoided putting the "short" pieces to try to maintain a visual and practical "harmony" of the bridge, even if in the 1400/1500 there was no "normative" for the laying of the boards that make up the floor of the bridge

IMG_2133_1.JPG.265d546663957d8594ba81a7d5af57ce.JPG

In the plans of construction of Adametz (probabilities derived from the drawings of the Duro, attached to the book "The ships of Columbus" there are no indications for the installation)

 

Once the installation was finished, I painted the bridge with the "turapori" (wood preparation varnish)

IMG_2135_1.JPG.c13bed441cc62622e9c0f997d7b8cf37.JPG

IMG_2136_1.JPG.3efdbab9f3181b4b186cc33e23039de8.JPG

 

with this update of the work I greet you

 

luponero

 

 

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

hello cog,
I have no problem following you,
to hear from us

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

I started working on the construction of the foredeck building the openings in the plating to lay the "beams" that support the deck of the bridge, to give the usual inclination and check alignment using an aluminum "ruler"

IMG_2154_1.JPG.1d3c98cfc1295e92d07c6064daaa2b68.JPG

(  in the usual period, I have prepared pear wood, which I will need for the realization of the material for the realization of a next model,

it is necessary for maturing at least two years before using the chosen wood

IMG_2156_1.JPG.284219ec339ca1fb2a0b503f5bd5d9fb.JPG

IMG_2157_1.JPG.3fc16bac0bc0581a9bee806dd22a62c1.JPG

the minimum time required for solid wood boards of 4cm )

 

IMG_2265_1.JPG.0b9fcad89341992caa82767caa0159c7.JPG

 

 

IMG_2274_1.JPG.dc0754a234e7e2215282edde2250fa26.JPG

 

I had the need to put the castles of the formwork and the bow, to have the profile of the model and put the "incinconi" the long external longitudinal beams, with the plotter I made "longitudinal" prints reporting them on the model and I marked the heights of bridges and points where the "incinconi" should be reported, measuring the heights from the main bridge made (I do not know if the translator will correctly report what I wrote 😩 )

IMG_2275_1.JPG.b44cbb3fe0fb7ac76867a0d8b4203855.JPG

IMG_2279_1.JPG.090480f325c16bf3ba5988ce6ca1691e.JPG

IMG_2286_1.JPG.a9b6167d50da4c5c7eed13bdc7ca5ba8.JPG

IMG_2282_1.JPG.869456fde24bf64528057a9d4c9057f7.JPG

the wide "curves" of the caracca, are one of the most complex elements during the realization of the second plating, probably this peculiarity emerges in the realization in all the "round" ships, the plating is an element that arouses interesting discussions among the modellists, during the realization of the first I did not find many difficulties, I started the plating without setting the curvature of the strips compared to the curvature of the main bridge of the trend of elements that will be realized later and will characterize more the trend,

in the realization of the second "at sight" I will have to give the courses (the plating boards) a curvature and a tapering (thinning the boards) in a different way,

regards

 

luponero

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

Thank you Oliver, I'm happy for your interest,

... making a "zero" model is even more enjoyable,

see you soon

 

luponero

 

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

A nice piece of work. The ships of this period - the great days of exploration - are really interesting, and you're making very good progress with a very good-looking model. And I agree, a scratch build is a very special thing.

 

I like the fact that you are cutting and seasoning your own timber for the ship. Walnut and pear are beautiful woods, and pear is also great for carving. You're lucky to have these timbers growing native in your country. In Australia where I live most people have to pay a lot of money to get even small pieces of European timbers. However, my home town of Ballarat is unusual; the street trees are mostly European - ash, oak, elm. Two of my neighbours have pear trees, and one had a walnut tree that died, so I got the timber.

 

The translator seems to be working well. Though it uses unusual words for some technical terms (such as "plating" where we would say "planking") it's quite easy to make out your meaning.

 

Best wishes with your project. I'm enjoying following it.

 

Steven

Link to comment
Share on other sites

Hi Steven,

I thank you for the compliments, I agree with you that the realization of a model with a zero build, is a special thing.

As you understood I live in the hills near Florence, in Italy, and this gives me the opportunity to find many types of timber, and even the recent storms caused by climate change have "unfortunately" allowed me to increase the amount of timber boards , as reported in the photos of the pear tree,

tonight I was going to insert some material and photos of the constructive updates, but I started to see your build on the dromone ...

very beautifull ! I spent two to three hours and I saw it until the p. 11

sincere congratulations, both for the historical part of the boat and for the construction, also before the Santa Maria, I built an ancient ship: an Etruscan vessel of the V-IV century. B.C. (some photos are in the "gallery")

Unfortunately, not knowing English I have to use the translator, which allows me to try to communicate with other friends this common "passion"

and even if in the translation, some words are distorted, "the passion" for the realization of naval models unites us

see you soon

(tomorrow I read the missing pages of your build)

 

 

luponero

 

(Fabio ) 

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

(tomorrow I read the missing pages of your build)  missing = remaining

 

Stevens build is indeed another gem at MSW. You may be interested in this build log as well.

 

I have a question concerning the wood you prepare. How do you cut the initial branch/trunc to a smaller size which can be cut into wood for model building.

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Link to comment
Share on other sites

After reporting the points I reported the first band (incintone) was made with 4 x 2 mm squared walnut, joined together (as if they were a composite beam)

IMG_2296_1.JPG.126af6b4ac1f2d279eb8d65885622ce7.JPG

I bring back a piece of walnut board, which fell two years ago due to a strong storm, with which I made many tables (I think I can also make a large table for the house)

the beauty of this wood consists of the shades ranging from white to black on a base that the base ones, in addition to the color also varies the texture and hardness of the timber (clear = soft, dark = hard)

IMG_2294_1.JPG.99d2d369a920bdf19983d83e5cd46227.JPG

after the first "incintone" I put the second one, always walnut, always composed beam

IMG_2301_1.JPG.cc85aa3b0164bc79676df58a78d9c0cb.JPG

 

IMG_2304_1_1.JPG.349ad7dc25c7198eca7dfa2f3abafc34.JPG

to have more precise references, I brought back the false bridges of the upper castles

IMG_2310_1.JPG.562e0a1688172d6589c537d9f2c00152.JPG

IMG_2316_1.JPG.0b29dd5262bb06934fe38ddf43497440.JPG

IMG_2314_1.JPG.48d23211bed7000c6853d723b458ee02.JPG

I also reported the "trincarino" would be the wooden board that ends the floor of the bridge,

( I report below a drawing with some parts of the parts in Italian )

Cattura.PNG.6bdcc37b5ca0755ef07dde24528c6b9c.PNG

 

with this I salute you, I go to sleep, maybe you are having breakfast
good night for me, good morning for you ;)

 

luponero

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

After laying the two "incintoni" I started laying the second planking, always with cherry wood, for the top of the side I did not taper the strips,

IMG_2334_1.JPG.a07946b06a3cbfe918214ef9bd2fa594.JPG

IMG_2336_1.JPG.45e7fdc2cbd7c26fe2ba80559bba455b.JPG

IMG_2338_1.JPG.d32f946f5477aa698dc7b4c8165111af.JPG

finished the upper part,

IMG_2339_1.JPG.0c27b225f905f9b80aa68112a8dc086e.JPG

IMG_2342_1.JPG.67f6ad74ce7edd6068d283280acb5c20.JPG

and also the part of the stern wall where there are bridges of the " cassero e casserotto"

IMG_2343_1.JPG.29062365717f8b3fd5462886689d26e0.JPG

I changed the width of the planking boards in the bridge of the drawbridge (6mm beginning, 10mm at the end)

The part of the lower planking to the main deck needs to be tapered both in the part of the bow and the stern, to maintain a distribution of the "harmonic" tables, (probably in reality, the distribution of the boards was less precise)

IMG_2348_1.JPG.3f9d14f5e3af20818a4c26b094738a11.JPG

I presume that the realization of the planking was also conditioned by the "machines" used to make wooden planksthat were very simple and rudimentary and used by hand, brought back under a painting of the fifteenth century. in which we see the artisans of time at work,visible the "4-hand saw", used for the construction of timber boards

1780642273_artigianipisani_1rid.jpg.55e5bc87cca8c0113672576d60f74c2c.jpg

moving forward with the planking,

IMG_2352_1.JPG.cddc67cf696be91540d1ba7234d0252a.JPG

 

 

IMG_2345_1.JPG

IMG_2349_1.JPG

IMG_2354_1.JPG

IMG_2355_1.JPG

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

unfortunately there are 2 images (4 last and last 3) that have been inserted incorrectly, it is repetitions of previous images,

while the last image shows the end of the laying of the plating, for convenience I used only one strip, increasing the width of the strips, in this part I will paint with varnish the topside area

IMG_2360_1.JPG.f367bf24fd5edcfe9a9047d2b223e7f1.JPG

for tonight I finish updating the works,

there is little lack of updating in "real time" with the progress of the realization

to hear from us

 

luponero

 

 

luponero

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

Nice work Luponero

 

 

 

You can remove the images selecting "edit" on the post, and then right click on the image you want to remove and select delete from the popup menu

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Link to comment
Share on other sites

On 1/4/2019 at 1:05 AM, cog said:

I have a question concerning the wood you prepare. How do you cut the initial branch/trunc to a smaller size which can be cut into wood for model building.

Ciao Cog,

after having cut off the initial branch, I decide how long it takes to mature according to the thickness with which I make the boards,

on average, to make a good seasoning it takes a year to season 1 cm of wood per side, so to make a maturing of a table of 2 cm it is necessary a year, usually I prepare tables with a thickness of 3 cm, for the seasoning it will be necessary for 1 and a half years, then I realize from the narrowest part of the table (3 cm) of the boards with a thickness greater than 1, 1.5 mm to finish with the thickness planer the desired thickness, both for the realization strips or other pieces of wood with proxxon disc saws 

while for the realization of the boards I use a band saw,or a "carpenter friend" for boards over 10 cm wide

IMG_2157_1rit.jpg.69ae0b04ad526051e88f824e1c30f3e5.jpg               Cattura.thumb.JPG.43c13509afe641beb2bb68ea95a0f036.JPG

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

The model of the Santa Maria that I am making is taken from the drawings of Adametz reported in the book "the ships of Columbus" by Winter, which I assume

were made by studying the model that you serve for the replica of the Santa Maria created by Fernandez-Duro in 1892 to commemorate the 400th 

anniversary of the discovery of America, the ship was built in Cadiz carrying out a study carried out by the commission with the presidency of Captain Fernandez-Duro, which was built as if it were a "nao" (caracca) giving way to a series of interpretations and analysis by many scholars on the subject, as a result of the few artifacts on the boat, probably also the realization of Santa Maria as "nao" that I find a widespread support among the historians of the time, even if the ornamental details were unusual for a ship from the fifteenth century

I bring back some images of the era

IMG_004_1.thumb.jpg.d8f371851d42e5b6fae893e508469d53.jpg     IMG_005_1.jpg.53204c1b174f3bcacb313d843358a158.jpg 

consequently it seems to me normal that we are different models of the Santa Maria, partly the result of imagination and partly of study, but without having the certainty that the real ship sailed from the port of Pales, August 2, 1492, was like the one we realize , indirectly allowing everyone to argue that perhaps the model we are doing is the one most similar to the one that actually existed (and of which we do not have many certainties)

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

The cold of these days does not create the condition to go and do the Santa Maria, I should turn on the stove and anyway it would take time to get a pleasant temperature, useful for moving the fingers ...

so I prefer to update the build with other images of the realization of the work, after the termination of the plating (always cherry) I passed everything with the abrasive paper and pieces of a sheet of glass (broken) using it as a plane

IMG_2361_1.JPG.7485c8c3c868e79abe6ba88a7e1d1012.JPGthe "pink blocks" I needed when I put the model upside down working it with the abrasive paperIMG_2363_1.JPG.18fba3b941b5c076b941d47564520992.JPG

IMG_2362_1.JPG.cb74edbcddc33f34b17a938a2d105eb4.JPG

the following works, were the realization of the external components of the walls, the first I made the hawse hole

using a walnut branch found outside the laboratory, trying to create a more similar situation for the types of processing of that period,

(many times we modelers researching in the various stages of construction that borders on perfection, which was impossible to achieve at the end of the fifteenth century) I thought to use the cylindrical "natural" shape of the wood for the realization of the hawse hole

IMG_2365_1_1.JPG.9f149406077acd3e0230a2354542660c.JPG

with the file I have enlarged the central hole and thinned the outer part,

IMG_2367_1_1.JPG.163c03c49ee542118ea18cc21f5b562b.JPG

realizing hawse hole and putting it on the bow

IMG_2368_1_1.JPG.ff70f93b8af23bfc6ebbf842f2d11342.JPG

IMG_2369_1_1.JPG.4ee94923680a3c362d916362ced83109.JPG

"strangely" the walnut used is very clear (it will be necessary to darken it in the future)

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

on the bulwark there is the "tack hole"

IMG_2371_1_1.JPG.bf672414825610899ba8c2853e9e3810.JPG

I placed the "profile" of the bulwark and I did the gun port and made an opening for reeving sheave

IMG_2372_1_1.JPG.d8aad2928dd94a2316666f9714fdf441.JPG

I put the paper tape to report deadwork, which I would later make with painting

IMG_2376_1_1.JPG.e4579e3623d305af841f2a768dab8159.JPG

see you next time

 

black Wolf

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

  • 2 weeks later...

To counteract the damage caused by the teredines and the proliferation of algae and similar, on the part relating to the living environment an antifouling paint was given the "pattume" a mixture of sulfur and tallow, white lead or minio, vegetable tar, fish oil, and the best was considered, from the aesthetic point of view, the "white", while with the use of mineral tar the color will become black, from an aesthetic point of view I would have preferred the black paint, but from the photos related to the reconstruction of the Santa Maria for the commemoration of the 400th anniversary of the discovery of America, we see that the painting used was white, so I decided to make it white, using a tempera paint

IMG_2378_1_1.JPG.c15908cccaedae5777d35cda26e745db.JPG

IMG_2379_1_1.JPG.415899555248a2d848486ed708b6e6f5.JPGacrylic paint has good coverage, the glossy effect disappears during drying

IMG_2387_1_1.JPG.76576793b93171fec7a21b72ee5a340f.JPG

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

While I was waiting for the paint to dry, I made the rudder, always with the walnut
as you can see its composition is very simple, it will be a piece that I will insert later,

IMG_2383_1_1.JPG.017a04168a5e58bad9830a1c3f800551.JPG

IMG_2384_1_1.JPG.a98ad3e1d439a575279a645726efb4b3.JPG

IMG_2385_1_1.JPG.3caeea31300305329ebf30807f7a747f.JPGonce the paint has dried, I gave the third "past" leaving it to dry

WP_20181215_007_1.jpg.9dddd022c87285e55c0b1b0342f1c93a.jpg

 

Lupo nero

_______________________________________

finished models  Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz   

https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/

models under construction Athenian triere of the 5th century B.C  https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ 

 

  San Giovanni Battista 1598 by luponero - Medicean galleon  https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/                                           

 

 

                       

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...