Dan Vadas Posted July 23, 2013 Author Share #601 Posted July 23, 2013 Breech Rigging continued Once I had worked out the length of the Breeching on the first gun I made a jig to get them all the same. The pics are self-explanatory on the method I used. The piece that the gun sits on is a nice tight fit inside the carriage to support it up away from the base - this gives me room to wrap the seizing around quite comfortably. The wires used to hold the two rings were spaced apart for length from the ones on the first gun : All eight guns with their Breeching : Danny CaptainSteve, avsjerome2003 and Sjors 3 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
Dan Vadas Posted July 23, 2013 Author Share #602 Posted July 23, 2013 Side Tackles The Side Tackles were used to run out the guns. Each side has two single 6" blocks which have a hook stropped to them. One block also has a becket to take the end of the line, which is eye-spliced to it. I've made up one of these tackles so far to see how it looks, and also to give me the method for doing all sixteen of them. In the pics below you can see the attachments to the carriage and spirketting - the line will be tidied up when the guns are installed permanently : Danny Sjors, CaptainSteve, Mirabell61 and 2 others 5 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
druxey Posted July 24, 2013 Share #603 Posted July 24, 2013 Nice. I particularly like the hooks. Are you going to tone down the breeching line and paint the handle of the quoin to look like wood? Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv Link to comment Share on other sites More sharing options...
Dan Vadas Posted July 24, 2013 Author Share #604 Posted July 24, 2013 Nice. I particularly like the hooks. Are you going to tone down the breeching line and paint the handle of the quoin to look like wood? Thanks Druxey. The Breeching line does look a bit stark, doesn't it? I was thinking of giving it a bit of very light stain. I'm still in two minds about the quoin handles too - if I'd have had enough tiny wooden belaying pins (my first choice) I'd have used them. Only had two left in my stock of used kit parts though . Danny Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
Dan Vadas Posted July 24, 2013 Author Share #605 Posted July 24, 2013 That looks a bit better I think. Thinned down Baltic Pine wood stain applied with a brush : Danny Sjors, avsjerome2003, Roman and 5 others 8 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
clipper Posted July 24, 2013 Share #606 Posted July 24, 2013 Nice shade on the breeching ropes mate Tony Quote Link to comment Share on other sites More sharing options...
tlevine Posted July 24, 2013 Share #607 Posted July 24, 2013 The breeching line looks much better with the stain. Not only is the color more consistent with the tackles but the stain also brings out the twist in the line, making it more "ropelike". Quote Toni Chairman Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Current Builds: NRG Rigging Project Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section Gallery: Hannah - 1:36 scale. Link to comment Share on other sites More sharing options...
gjdale Posted July 24, 2013 Share #608 Posted July 24, 2013 Good choice on the breeching line Danny - looks much better. Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
aliluke Posted August 4, 2013 Share #609 Posted August 4, 2013 Hi Danny Although I think I've seen it before (MSW1 versus MSW2 - will do this to you) I was just alerted again to your Vulture project. I'm just starting on the kit Amati Fly - a poor cousin- and would like to thank you for the enormous wealth of information that your build provides for these ships. Just incredible - knowledge plus skill. Beautifully made! I'm going to start back at page 1 and just look and learn... Cheers, Alistair Quote Cheers Alistair Current Build - HMS Fly by aliluke - Victory Models - 1/64 https://modelshipworld.com/topic/34180-hms-fly-by-aliluke-victory-models-164/ Previous Build - Armed Virginia Sloop by Model Shipways Previous Build - Dutch Whaler by Sergal (hull only, no log) Link to comment Share on other sites More sharing options...
Dan Vadas Posted August 4, 2013 Author Share #610 Posted August 4, 2013 Thank you Tony, Brian, Toni, Grant and Alistair. Brian, the stain was spirit based Wattyl. I've thinned it down even more on the rest of the breech ropes (about 60% turps). The first one can go right down the back under the quarterdeck. Hi Alistair, good to see you back again. Enjoy the ride . Here's a couple of pics of a completed gun. I'm going to show them all as "run out" except for Number 3 which will be at full recoil with a train tackle : Danny Piet, CaptainSteve, rdsaplala and 6 others 9 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
Sjors Posted August 4, 2013 Share #611 Posted August 4, 2013 That looks great Danny ! I think I take a little trip to Down Under and will you give me lessons then? And I want to see the master at work ! Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre Link to comment Share on other sites More sharing options...
BANYAN Posted August 4, 2013 Share #612 Posted August 4, 2013 Lovely clean and crisp work on the canon tackle and rigging Dan, those sort of tasks are enough to make one consider the asylum cheers Pat Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
riverboat Posted August 5, 2013 Share #613 Posted August 5, 2013 Wow !...... like they say," You've Come a long way baby"...since last I saw your log. Dan your work is just outstanding!! She's look'n great! Frank Quote completed build: Delta River Co. Riverboat HMAT SUPPLY USRC "ALERT" in progress: Red Dragon (Chinese junk) Link to comment Share on other sites More sharing options...
Jim Lad Posted August 6, 2013 Share #614 Posted August 6, 2013 Just catching up, Danny! She's looking the ants pants! John Quote Link to comment Share on other sites More sharing options...
Padeen Posted August 6, 2013 Share #615 Posted August 6, 2013 Those guns are wonderful Danny! How can I order some? Quote Padeen (Adeline) "When there is a will, there is a way" Completed build: Le Camaret - Constructo - static wood 1:35 (build log, gallery) Current build (very limited modelling time at the moment...): HMS Fly - Amati/Victory Models - static wood 1:64 (build log) Projected build: HMS Victory - Chris Watton's design - static wood 1:64 (when available..., no rush!) Link to comment Share on other sites More sharing options...
SkerryAmp Posted August 6, 2013 Share #616 Posted August 6, 2013 Danny those guns look incredibly good! The detail is amazing! (SUCH patience) Love watching your work unfold! -Adam Quote -Adam Current Builds Santa Maria - Artesania Latina (1:65) POB MayFlower - Model Shipways (5/32"=1') POB Blue Shadow - Mamoli Revolutionary War Brigantine. (Fict) (1:64) POB (Recommissioned as the Kara June) On The Shelf Waiting so Patiently USRC Ranger - Corel (1:50) POB 18th Century Longboat - Model Shipways (1:4) POF La Nina - Artesania Latina (1:65) POB U.S Brig Syren - Model Shipways (1:64) POB Completed Builds Phantom NY Pilot Boat - Model Shipways (1:96) Solid Hull Decommissioned Builds (Time and conditions were not good to these. They have been cancelled =( ) Willie L Bennett - Model Shipways (1:32) POF USRC Harriet Lane - Model Shipways (1:128) Solid Hull Link to comment Share on other sites More sharing options...
Kevin Posted August 6, 2013 Share #617 Posted August 6, 2013 Sorry Dan, i have not visited yr build in a little while, yr work is just so neat and nice -brilliant - well done Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 HMHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
Patrick Haw Posted August 7, 2013 Share #618 Posted August 7, 2013 Dan, I have spent the last few hours poring over your build (and I'm still only on Page 8). Your work is truly amazing and a joy to follow. Model builders like you are an inspiration to those of us who glue our fingers together more often than pieces of wood! Thank you for sharing this magnificent build! Patrick CaptainSteve 1 Quote HMS Victory by Patrick Haw - Caldercraft - Scale: 1/72 Link to comment Share on other sites More sharing options...
Dan Vadas Posted August 7, 2013 Author Share #619 Posted August 7, 2013 Thanks very much Sjors, Brian, Pat, Frank, John, Adeline, Adam, Kevin and Patrick - your comments are always appreciated. Sjors, any time you're "down under' you can certainly drop in . Welcome home (again) John . Adeline - you can order the barrels, but the rest is up to you . Some pics of the eight completed guns with their rigging. I've also glued in the remaining deck beams : This weekend I'm taking Vulture to a model show at Port Macquarie - I took her up there twelve months ago and have made considerable progress since then. Danny Padeen, rdsaplala, Sjors and 6 others 9 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
Jim Lad Posted August 7, 2013 Share #620 Posted August 7, 2013 Have fun at Port, Danny. I hope you're taking your camera. John Quote Link to comment Share on other sites More sharing options...
mtaylor Posted August 7, 2013 Share #621 Posted August 7, 2013 Danny,She's looking great. What John said about the camera and having some fun.... Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Sjors Posted August 8, 2013 Share #622 Posted August 8, 2013 Yes Danny………PICTURES !!!!!!! And thanks for the invitation. When It's happening that we are going Down Under, we bring you a visit….for sure !!!! Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre Link to comment Share on other sites More sharing options...
gjdale Posted August 8, 2013 Share #623 Posted August 8, 2013 Have fun at the show Danny, and we all expect you to come back with the "Best in Show" prize! BANYAN, avsjerome2003 and Sjors 3 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
lagrayjr Posted August 9, 2013 Share #624 Posted August 9, 2013 Danny, you may want to consider installing the truck molding, waist rail and sheer rail before you permanently mount the cannons. Also, it may be easier to build but not install the gun port lids at this time. Laman Quote Link to comment Share on other sites More sharing options...
Dan Vadas Posted August 20, 2013 Author Share #625 Posted August 20, 2013 Thanks for looking in John, Mark, Sjors and Grant. I had a great time at the Port Macquarie Model Show (pics HERE) and also at my "hometown" show at Newcastle last weekend (pics were taken by Janos ). Danny, you may want to consider installing the truck molding, waist rail and sheer rail before you permanently mount the cannons. Also, it may be easier to build but not install the gun port lids at this time. Laman Laman, thanks for the advice but I was intending to do just as you suggested . The guns can still be retracted enough to clear the port lids, I have only spot-glued them in position for the two shows mentioned above. In fact I am going to re-rig the four in the waist (at least) as I wasn't all that happy about the line I used. I've ordered some very nice line from Chuck's "Syren Models" site which should arrive in the next day or so. Danny Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
Dan Vadas Posted August 20, 2013 Author Share #626 Posted August 20, 2013 Forecastle and Quarterdeck Carlings There are only a few Carlings on both the Forecastle and Quarterdeck, unlike the lower decks. These mainly support such things as Steam Gratings on the Forecastle and the upper Capstan Step, a Companion and a few Scuttles on the Quarterdeck. Danny Ferit, druxey, Paryzek and 6 others 9 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
Kevin Posted August 20, 2013 Share #627 Posted August 20, 2013 Danny How far are you taking this build, are you just doing stub masts, or going all the way with spars etc i just love your work Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 HMHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
Dan Vadas Posted August 20, 2013 Author Share #628 Posted August 20, 2013 Danny How far are you taking this build, are you just doing stub masts, or going all the way with spars etc i just love your work She will be fully rigged Kevin. Danny Trussben, CaptainSteve, Kevin and 2 others 5 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
allanyed Posted August 20, 2013 Share #629 Posted August 20, 2013 Dan, Fully rigged, oh my. I look forward to many months (years) of following your build. Maybe it will give me the spark I need to go back to rigging something more complex than a schooner. Keep up the great work. Allan Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
Jim Lad Posted August 20, 2013 Share #630 Posted August 20, 2013 Looking good, Danny. She'll look really special fully rigged! John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.