Jump to content

HMS Triton Cross Section by Rusty - FINISHED - 1:48


Recommended Posts

Rusty Yours is great,It makes me try that much harder. Larry

With Age Comes Wisdom,I'm Still Waiting!

 

Current Builds:Syren.Triton Cross section.

Completed Builds: Virginia by AL

                           King of the Mississippi by AL

                           Constellation by AL

Link to comment
Share on other sites

Thank you all for the kind words.

 

Here I’ve started adding the planking up to the point under the main deck beam location.

At this point I'll move on to planking half of the deck with Holly.

post-43-0-60946100-1363225634.jpg

post-43-0-65087500-1363225635.jpg

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Here is the first row of holly set in place.

 

I pre-notched the plankes for the main gun deck supports.

 

 

post-43-0-58663400-1363305483.jpg

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Nice - holly is really nice for deck planking. Plus this is 'easy' planking so it should go nicely. Are you planning on caulking? though there are a multiplicity of methods of doing that..

 

Joss

...

Link to comment
Share on other sites

Hi Joss, I will be using the black paper for the caulking just like I did the hull.

Some time I want to try the black wood filler but for now I'll stick to paper.

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

  • 2 weeks later...

Hi All,

 

Sorry all but the camera decided to hack up the hair ball. I was taking pictures

thinking all was good. I pulled the memory card to download the pictures and

nada, zip, zero nothing. Put the card back in, took some more pictures. Nope.

I replaced the card and still nothing. You would think that a $100 camera would

last longer then 6 years of being covered in dust in a work shop and repeatedly

knocked on the floor. :blink:

 

So anyway, I stole the Admirals camera to take some pictures to bring us up to

date. The decking was completed and I used Holly treenails with the black

construction paper for the caulking. For the support beams I used some Swiss

Pear and using a xacto and files. I then went on to framing in the gun deck with

the boxwood which the main beams are almost done and then I’ll start on the

carlings ledges and knees.

 

post-43-0-00826700-1364261759.jpg

post-43-0-81804200-1364261756.jpg

post-43-0-82179200-1364261760.jpg

post-43-0-78892300-1364261762.jpg

 

That's were I'm at right now!

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Very impressed with your build Rusty.  Particularly the floor beam posts.  Nice hand work.  The holly and the black construction paper look great!

Edited by bbrockel

 

 

"I've told you a million times, don't exaggerate   ;) "

 Current builds:

 

  H.M.S. TRITON Cross Section by Bbrockel - Scratch Build - Scale 1:48

  US Brig Syren by Bbrockel - Model Shipways -Scale 1:64

Link to comment
Share on other sites

Really nice Rusty. I like especially the work you have done with the treenailing of the deck! They all look symetrical and in their correct place.

 

Did you use some kind of handmade plate to mark the place of them?

 

Keep going!

 

 

Daniel.

Link to comment
Share on other sites

Beautiful work, Rusty. 

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Hi Pete and Ben. There’s nothing special I do. I just make sure that the paper is completely

glued on both sides. I only leave about 1/32” excess on the topside and none on the bottom.

Once dry I sand with 150 then 220 then 400 grit sand paper. I sometimes I will scrap it too

with a single edged razor blade. I’ve only tried this on hardwoods like holly, boxwood and

par marfin. I hope this helps.

 

Hi Bob, Thanks’ and the chisel’s I use are the small and mini palm chisels from U.J. Ramelson.

 

Thanks Russ. Doing them really makes me want to get a lathe!

 

Thanks Paddy. I wish I hadn’t lost the pictures though.

 

Thanks Bob. I was pleased with the contrast with the planking, paper and treenails.

 

Hi Daniel. I just use a strip of wood cut to the desired width and lay it on the beam and mark

each plank prior to drilling.

 

Thanks Mark. Much appreciated.

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

What can I say that hasn't been said? Really sharp   Larry

With Age Comes Wisdom,I'm Still Waiting!

 

Current Builds:Syren.Triton Cross section.

Completed Builds: Virginia by AL

                           King of the Mississippi by AL

                           Constellation by AL

Link to comment
Share on other sites

Rusty,

just been catching up with everyones progress. The build is looking really good, congratulations. Nice work with the deck beam pillars, little details like that really lift the quality of a model. You have a lathe?

 

Regards,

Grant.

Link to comment
Share on other sites

Thanks Joss, Larry, Runner63 and Grant.

 

No lathe yet Grant. Hopefully some day I’ll get one.

 

Well all of the gun deck beams are in place. And some light sanding

has been done. Next I’ll be working on all of those knees. Then I’ll have

to do all of the carlings and ledges.

 

That’ll keep me busy for a while! :) 

post-43-0-39093300-1364815827_thumb.jpg

post-43-0-32711800-1364815829_thumb.jpg

post-43-0-42770800-1364815831_thumb.jpg

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Thanks Pete. I'm glad it's coming out nicely.

 

Here are the first of the knees in place.  Still need to be sanded.

 

post-43-0-20853800-1364998226_thumb.jpgpost-43-0-19989800-1364998228_thumb.jpg

 

Next it's on to the 10 hanging knees and all of those little notches to cut. :angry:

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Thanks, Paddy Daniel and Bob.

 

All of the hanging knee blanks are rough cut out with the one in the

foreground cut and ready to be installed.

 

post-43-0-44613200-1365180908_thumb.jpg

 

Here are a couple of close ups to show the various angles etc that have

to be cut into them to fit around the other knees and hull planking.

 

post-43-0-28011800-1365180919_thumb.jpgpost-43-0-30050400-1365180921_thumb.jpg

 

After they are all done it will be time to add all the carlings and cut those pesky notches. :o  

 

 

 

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...