Jump to content

HMB Endeavour by BANYAN - FINISHED - Artesania Latina - 1:60 - circa 1768


Recommended Posts

Yep same stuff Popeye - weighs less, won't shatter and more importantly, at least when I bought my acrylic sheet, cheaper than glass.  Not now though as it seems glass is the cheaper option these days.

 

cheers

 

pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Downside with acrylic, not so scratch resistant.

Downside with glass, can break and shatter.

Edited by Nirvana

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

As I have found out Per :(  - a big scratch already which I will try to polish out with "Brasso" but at least it is on the back (nearest the wall) side of the case.

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

So close...  Wonderful work, Pat.  Just wonderful.  And the case is ready to boot.   I'm looking forward to your launching and display her proudly.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Thanks you so much John and Mark; appreciate your comments.

 

John - next job is to complete the HMCSS Victoria which I have been researching and assisting the build.  Its' back in my hands now for final fit-out with hull and coppering completed.  I will start a dedicated log soon.  i will also be making a start on my HMAS Vampire (3D printed project) early next year.

 

Mark - final photos this week I hope :)

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Link to comment
Share on other sites

Well folks, "enough is enough" - I still have two boats to make (in very slow time) but they will be added to the display case as separate items and not onboard the model.  So, although there are a few more items I would like to add, and a few fixes i would still like to make, I think I will call it quits and declare this one finished :)

 

The following photos show her in her final fit; but, I must apologise for the quality of the one in her case.  I will take better shots of her in her home when I can control the reflections a little better :(

 

The photos will be in three posts.

 

cheers

 

Pat

 

post-385-0-67865800-1478728661_thumb.jpg   post-385-0-91474700-1478728694_thumb.jpg  post-385-0-34642700-1478728737_thumb.jpg

 

post-385-0-14248800-1478728714_thumb.jpg  post-385-0-68060500-1478728765_thumb.jpg

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Part 2

 

post-385-0-24072500-1478728919_thumb.jpg   post-385-0-46141900-1478728943_thumb.jpg

 

post-385-0-83483100-1478729013_thumb.jpg   post-385-0-47307200-1478728968_thumb.jpg

 

post-385-0-66254800-1478728990_thumb.jpg

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Part 3 Final Installment 

 

post-385-0-17508000-1478729204_thumb.jpg  post-385-0-05246600-1478729272_thumb.jpg

 

post-385-0-34899000-1478729153_thumb.jpg  post-385-0-70788800-1478729177_thumb.jpg

 

post-385-0-12997000-1478729128_thumb.jpg

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Pat:

Well done. Congratulations on a really nice finished model. It was worth all of the effort.

 

Russ

Link to comment
Share on other sites

Thanks for looking in and congratulatory comments Russ, BE and John.

 

Russ - thanks, it was your early support in ther battle station build that got me into 'bashing' the kit so much.

 

BE - thanks for your help with the pennants also mate.

 

John -  I really appreciate your assistance in the detail photos of the replica rigging you took for me .  ...and, yep, I would much rather scratch the case :)

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

G'day Pat

Congrat6on a bloody marvelous job on the HMS ENDEAVOUR.

She's a beauty and you ought to be very proud of her.

What's 10 years mate? At least it's done and covered.

Again well done!

BTW what's your next endeavor into the model ship building? (Hoped that you like my pun!). Why not do the Royal William? She's a beautiful ship.

Havagooday mate

Greg

"Nothing is impossible, it's only what limitations that you put on yourself make it seems impossible! "

 

Current log : The Royal Yacht Royal Caroline 1749 1:32 by Greg Ashwood:...

 

Link to comment
Share on other sites

Thanks for looking in and comments Keith and Greg.

 

Keith - more like 13 :)  (most while I was still working)

 

Greg: see http://modelshipworld.com/index.php/topic/14596-hmcss-victoria-1855-172-by-banyan/#entry453812

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Thanks Greg and UTS; and for all the likes.  Greg, I am preparing the space for the next one :)

 

cheers

 

Pat

Edited by BANYAN

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

she looks awesome Pat..........so well done,  and the rigging is flawless!   she looks great in her case  :)   did you fix the scratch.......nail polish perhaps?

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Scratches on plexiglass can be buffed out, using fine compound for cars. Well depending on the depth of it.

Edited by Nirvana

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

Thanks Denis, Dave and Per - much appreciate you all looking in and leaving a comment.  Thanks also for the many likes.

 

I haven't tried to fix the scratch yet but will try the car polishing compound.

 

Denis - nail polish?  more clues please I am intrigued :)

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

something I had heard about...don't remember all the particulars.   fill the gap {scratch} with clear nail polish using a fine tip brush...not sure about the rest of it,  but I'm sure there is some buffing involved.  thought you may have have known about it >shrug<

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Congrats Pat beautifull job,nice to get her in a case before the nasty dust gets it.You can just sit back now and look at your ship.

Current builds: HMS Victory - Caldercraft 1:72

 

Completed builds: HMB Endeavour - OcCre 1:54   HMS Supply - Caldercraft 1:64. Fishing boats, Bremen,  Palamos.

 

 

Link to comment
Share on other sites

Thanks again to all the likes and comments; much appreciated folks.

 

Keith - HMCSS Victoria (see earlier post and here)

 

Thanks for looking in Ron, not just to keep the dust off but also to stop fiddling with it (adding more detail) :)

 

Thanks John, appreciate the earlier feedback and constructive comments to keep the rigging on track.

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Congratulations on finishing this beautiful model, Pat.  She looks a treat in her new home.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Thanks Mark - it's been a while in the making :)

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...