barnol2461 Posted January 4, 2014 Share #1 Posted January 4, 2014 I started this build approx twelve months ago and has been an on and of project. Attached are photo's showing how far I have got so far. 1. Firstly is the front 2. The middle 3. The rear 4. In the alcove in the middle I have put livestock which to me looks quite effective. 5. There is then the top of the 2nd deck front and rear 6. With the cabins I did not put the cast windows in as I am planning to fit light inside so that they can be turned on at night to make it look effective. Still not completed as you can see. 7. Next is the front and rear of the 3rd deck 8. The 4th and 5th decks The stacks had there metal parts dry fitted to see if they fit fine. 9. The 1st set of stairs which have been a nightmare to complete. The handrail would not go right so I have tried using rope which looks effective. Not yet finished as I need to tidy the ends up, unfortunately the rope that came with the model is not nylon based. 10. The 2nd set of stairs have been started but a long way to go to get them right. 11. The paddle wheel has been fitted , only needs the arms on either side fitted to finish it of. This is all that I can show you at precent but will update further when I get more work done. Is there anyone that can give me ideas how to improve my model or advise me of anything I have done wrong. Anybody that has done the stairs I would be very pleased if you could give me some advice as to how to do it correctly. Captain Slog, JesseLee, WackoWolf and 1 other 4 Quote Link to comment Share on other sites More sharing options...
JesseLee Posted January 4, 2014 Share #2 Posted January 4, 2014 Looks good so far. I have never built one of these but have always wanted to. Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle Link to comment Share on other sites More sharing options...
dragzz Posted January 4, 2014 Share #3 Posted January 4, 2014 looks vary nice so far i have the same build as for the staires what i did was lighty glued the post to a peice of wood then glued the frist 3 steps from the bottom then started the cuve for there step 1mm apart if u like look at my build u see what i mean good luck with your build keep up the great work WackoWolf 1 Quote this is my dry docks side build hms victory/corel http://modelshipworld.com/index.php/topic/4698-hms-victroy-by-dragzz-corel-scale-198/ side build waiting on parts /king of the mississippi/ al kit http://modelshipworld.com/index.php/topic/3490-king-of-the-mississippi-by-dragzz-al-scale180/?hl=%20king%20%20the%20%20mississipp current build mare nostrum al kit http://modelshipworld.com/index.php/topic/8125-mare-nostrum-by-artesania-latina-scale-135-by-dragzz-small/ Link to comment Share on other sites More sharing options...
dragzz Posted January 4, 2014 Share #4 Posted January 4, 2014 ok here barry here are some pic for ya to try to help u hopes this helps u out if u need more info just ask good luck take your time theres no need to rush it WackoWolf and yvesvidal 2 Quote this is my dry docks side build hms victory/corel http://modelshipworld.com/index.php/topic/4698-hms-victroy-by-dragzz-corel-scale-198/ side build waiting on parts /king of the mississippi/ al kit http://modelshipworld.com/index.php/topic/3490-king-of-the-mississippi-by-dragzz-al-scale180/?hl=%20king%20%20the%20%20mississipp current build mare nostrum al kit http://modelshipworld.com/index.php/topic/8125-mare-nostrum-by-artesania-latina-scale-135-by-dragzz-small/ Link to comment Share on other sites More sharing options...
Rick Posted January 5, 2014 Share #5 Posted January 5, 2014 (edited) Barry, You have a very good start on your project. The stairs, I think are the hardest part to get right and any creative solution may be the best thing to do. Several "King of the Mississippi" build logs are on the Model Ship World site. They are all worth while looking into to see how others have tackled various problems. Adrieke, Dragzz, John46, Robert1965, Rick, and others have done an excellent job in documenting their builds. I speak for the others in welcoming you as you share your work as you have already done so above, Rick Edited January 5, 2014 by Rick Quote Link to comment Share on other sites More sharing options...
barnol2461 Posted January 31, 2014 Author Share #6 Posted January 31, 2014 Thank you all I will try to document the build further as I work on it but at the moment my back injury has had me bed ridden since the new year so not much going on I am afraid. The ideas that you all have given are greatly appreciated, I will accept all the advice I can get. Thank you Barry Quote Link to comment Share on other sites More sharing options...
yvesvidal Posted January 31, 2014 Share #7 Posted January 31, 2014 Beautiful work Barry. Yves Quote Link to comment Share on other sites More sharing options...
Bugra Posted January 31, 2014 Share #8 Posted January 31, 2014 Very good start and she looks very nice Barry. Keep it up. Bugra. Quote There is nothing that a little sanding can't solve.. Bugra. Current Builds : H.M.S. Triton Cross Section by Bugra - 1/48 Turkish Traditional Ship - Surmene Takasi by Bugra - 1:35 Link to comment Share on other sites More sharing options...
CaptCraig Posted February 7, 2014 Share #9 Posted February 7, 2014 I am just starting this build. I hope mine comes along as well as yours has. I also hope your back injury heals in short time so you can stay ahead of me...I will need as many tips as I can get! Very nice work! Quote -Craig It's never too late to turn the tide... Current Build- King of the Mississippi- Artesania Latina- 1:80 Scale Link to comment Share on other sites More sharing options...
maturin52 Posted February 11, 2015 Share #10 Posted February 11, 2015 You seem to have addressed an issue that I've just across. I'm fabricating the swinging doors for the engine room on the lower deck. The instructions say to use 1x4 stock for the frames, but I find that that width covers far too much of the actual door panels. Did you use differnet stock? Did you rip the 1x4 to 1x2 or something in that range? maturin52 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.