Jump to content

HMS Victory by clearway - Billing Boats - 1/75


Recommended Posts

You have raised the bar to a place to which I can only aspire. You log is a tremendous resource on which I will surely rely upon as I go down this journey even though I am building the Panart 738 kit.

 

Regards

Link to comment
Share on other sites

Thanks for the views, likes and comments all- it does help:P. Billings just used an eyebolt to hold the jeers in place, so fashioned some cleats from some walnut left over from another kit (never throw anything away) and pinned them using bamboo dowel fashioned from a cocktail stick. also added cleats to the bases of the fore and main masts for the trusses- these are old billing ones from the spares box. Started painting the yellow on the mizzen and gave the fore and main the first of two black priming coats a well as tapering the mizzen gaff and boom.P7161729.thumb.JPG.e82089d8e558a9b22eb3df11b9b71887.JPG

P7161732.thumb.JPG.02bd9616d24bb1c361b1f559610bd577.JPG

P7161733.thumb.JPG.b66bb21dce17bd73f9b48e356a35c7a7.JPG

Have fun all and keep up the good work everyone.

 

Keith

Link to comment
Share on other sites

Keith,

Keeps looking better and better. Very nice work indeed!

 

Regards

Link to comment
Share on other sites

Thanks again for the visits to my log and the kind comments. Not had much time in ye olde ship yard due to visitors. The main and fore masts need one more coat of yellow and that will be the lower masts painted up. Obtained the caldercraft victory boats set, but being at 1/72 scale they are a bit of a squeeze on the skids so not sure if i will use them all. The tretletrees in the pic with the boats are made from bamboo obtained from them beefburger skewers which will replace the kit ply ones which are a bit fragile- not sure if bamboo is right wood to use?

P7231741.thumb.JPG.abe7116a049a03d8245ea57fc3843568.JPG

P7231737.thumb.JPG.5f181bc451be22c13290087e161d94d3.JPG

as always take care and have fun all.

 

Keith

 

Link to comment
Share on other sites

Hi again all, thank for the views and likes everyone, painted the deadeyes with the help of magic hands and a length of brass wire. Also couldn't get away with the replacement bamboo cross trees so delved back into my pile of walnut offcuts. then time to get messy and break out the india ink to start dying the thread for the shrouds- great fun with oodles of mess- like being back in art class at school!!:P.

 

P7281742.thumb.JPG.3dd4d51777b8097debf77e1c19d8a9eb.JPG

 

P7301746.thumb.JPG.21d7b0a2e5243e05cd385c011225f6a2.JPG

 

P7301744.thumb.JPG.3edc97c73d5ad981c236a58008f93312.JPG

 

P7301745.thumb.JPG.0254004fec76313de05e3eac7c6fb9fa.JPG

 

Take care and happy modelling all.

 

Keith

Link to comment
Share on other sites

thanks for looking in everyone- been a nawty boy and bought the caldercraft HM bark Endeavour and billings marie jeanne- my bucket list o ships is nearly complete- just gotta build em :P.

not much to report this week- got the deadeyes in place on the mizzen top for the futtock shrouds (not exactly as per real practice but once painted should pass muster) and got the trestle trees and mast caps glued in place on the topmasts.

 

P8061749.thumb.JPG.2385ae24bb51fc1fe05f9dc4a0092e6d.JPG

 

P8061750.thumb.JPG.39430780e2d270de10a1f483a0c6717c.JPG

 

take care all and have fun.

 

Keith

 

Link to comment
Share on other sites

  • 3 weeks later...

Hi again all, after a couple of weekends D.I.Y. refurbing the bedroom walk in cupboard (feel like harry potter now)! its back to my Vicky. Finished soldering up the strops on the futtock deadeyes, and used a couple of pieces of hawthorn to make the jaws on the driver boom and gaff boom (billings just had a couple of laser cut semicircles of ply). Also after starting to make up the plywood anchors i decided to replace them with caldercraft whitemetal anchors with walnut stocks.

P8271754.thumb.JPG.8e4af5aa20a9d433729669bae1d82b0e.JPG

P8181752.thumb.JPG.6be9a288af3ac1c58d8b135ea3a25249.JPG

P8271753.thumb.JPG.26f843274c51cc8f63d334effc35ef9f.JPG

P8271760.thumb.JPG.ce5632e1bcf2a73de938d924407f0c16.JPG

till later- take care all and thanks for viewing.

 

Keith

 

Link to comment
Share on other sites

Hi all- thanks again for dropping in and the views/ likes. Work continues on the masts. Had started to paint the doubling on the topmasts when i realised i hadn't attached the sheaves for the forestays so sanded back and sorted them using the kit supplied laser cut ones (luckily the masts are only held together using fids so easy to dismantle). Also used an off cut of walnut dowel for the dolphin striker and secured it with three brass u shaped staples- while i had some epoxy mixed i also glued the bills onto the caldercraft anchors. I sanded the jaws on the gaff and driver booms to final shape after drilling and gluing a couple of treenails into each one.

P9031762.thumb.JPG.50460ae1c8cc6c087d5355ac0a0ae833.JPG

P9031765.thumb.JPG.0991413539d7fe84b18496d0e2e20de6.JPGP9031767.thumb.JPG.afdbca9ee66c08bccbf2732c3351530b.JPG

P9031764.thumb.JPG.669fcb99031ed96cf8ab292edad16623.JPGP9031774.thumb.JPG.dc310f0483266330fb5f4f7466ef5e06.JPG

take care all

 

Keith

Link to comment
Share on other sites

  • 1 month later...

Hi all- and so the rigging finally begins! Also fastened the rudder chain in place. Havn't permanently fastened the halliards for the deadeyes in place yet to allow for any adjustment needed. I am using James lees and Longridge for reference as the billings rigging instructions are shall we say a bit vague!

 

 

PA021781.thumb.JPG.bec4c9ede551a2da8e097dbbef08d995.JPG

PA081783.thumb.JPG.e66a25d2ea28f8797441a5bffb14ddeb.JPG

PA101790.thumb.JPG.76b48ddd380f939fdd0e4fe51083306e.JPG

Thanks for popping in and take care all.

 

Keith

 

Link to comment
Share on other sites

  • 2 weeks later...

thanks for popping in to have a look all. Ah the glorious controlled chaos of rigging (at least when i do it:P). only the mizzen stay, preventer stay, topmast stay, and futtock shrouds are permanently glued in place the other mizzen shrouds still need gluing. Once the main shrouds are rigged i will need to think about fixing the foremast and bowsprit in place ready for rigging the mainstay (the stay rigged to the main at the moment just being temporary.

PA221795.thumb.JPG.dbf389f31d7da3b7cfbfec80ee41ac04.JPG

PA221797.thumb.JPG.201087acfd2ef9b6c216e5a5a1b9c4cd.JPG

til later- have fun all.

 

Keith

Link to comment
Share on other sites

Thanks for the comments,  likes and views as always everyone. Main shrouds rigged and start made on main stay and preventer stay. Bowsprit gammoning in place as well as the rope for the main stay heart. The foremast and marines catwalk still to be permanently attached (need to fasten the blocks under the foretop for the sprits'l yard and topyard.

PA291798.thumb.JPG.c9b8d1ca64a3550586d2ddf6857a0a67.JPG

PA291800.thumb.JPG.135314e18e4810e12c9ce3f4cdc4faab.JPG

take care all.

Keith

 

Link to comment
Share on other sites

  • 3 weeks later...

Hi all and thanks as always for the views and likes everyone. Now have the main stay and preventer stay rigged and the ropes for the main futtock shrouds and topmast shrouds in place along with the topmast stay and preventer stay.

 

PB191801.thumb.JPG.67d7621da51bcb49d340e546b3bfb85b.JPG

PB191802.thumb.JPG.5c5e05502819e41de23ee71a1b255f06.JPG

PB191803.thumb.JPG.e3f97b1f39f3689e5f97aa01edb226f6.JPG

have fun as always folks (yikes only 5 mondays till you now what!)

 

Keith 

 

Link to comment
Share on other sites

Very nice done. Keep up the good work.

 

Regards

Link to comment
Share on other sites

thanks for the views lies and comments everyone Rigging moving onwards and forwards. the main futtocks rigged and the main top shrouds now needing adjusted and tied off along with the main topstay and preventer stay. fore shrouds started along with temp forestay- really need to think about rigging bobstays and shrouds on bowsprit and finishing the jibstay.

PB261804.thumb.JPG.4ddf1d0008ab72dc0178a99cf92f801f.JPG

PB261805.thumb.JPG.91fc89a1f63d484f57d1b359819c244c.JPG

take care all.

 

Keith

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

The ratlines continue! also the shrouds on the foremast are in place, but the deadeyes wont be rigged til i rig the snaking and the main stay and preventer stay are rigged. Once the ratlines are rigged on the main top shrouds and the breast/ backstays are in place.

 

PC221810.thumb.JPG.e57ca386b09b6e58ae581e1bc93c47ee.JPG

 

PC221809.thumb.JPG.ee61f7af1c878f39087281338c4f9594.JPG

til later all have fun- three sleeps til santa!

 

Keith

Link to comment
Share on other sites

  • 1 month later...
  • 4 weeks later...

After spending some time reading thru your log, Keith, I am just about ready to give my first build (HMS Victory, Constructo) a viking burial and do it all over again with this kit.

Stunning workmanship !! 

:cheers:

 

 

CaptainSteve
Current Build:  HM Granado Bomb Vessel (Caldercraft)

My BathTub:    Queen Anne Barge (Syren Ship Models)       Log:  Queen Anne Barge (an build log)

                        Bounty Launch (Model Shipways)                 Log:  Bounty Launch by CaptainSteve
                        Apostol Felipe (OcCre)
                        HMS Victory (Constructo)
Check It Out:   The Kit-Basher's Guide to The Galaxy

Website:          The Life & Boats of CaptainSteve

Link to comment
Share on other sites

Thanks all for the views/ comments as always- rigged the main topmast ratlines, breast stays, backstays, and travelling backstays (though wont be rigged to the channels til most of the running rigging is in place). Also finished rigging the main topmast stay/ preventer stay, and made a start on the snaking on the mainstay/ preventer stay.

 

P3031812.thumb.JPG.2cfb44670f20c32f063560fb5c40f385.JPG

P3041813.thumb.JPG.727efa12f9b5dd0321d4cc5006bec966.JPG

P3041815.thumb.JPG.89d63e06d2148edc4bb0a5d8d58be8a1.JPG

have fun all and keep up the good work everyone.

 

Keith

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...